UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

x   QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended September 30, 2014

 

or

 

o   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from                      to                     

 

Commission File Number: 001-10647

 

PRECISION OPTICS CORPORATION, INC.

(Exact name of registrant as specified in its charter)

 

Massachusetts 04-2795294
(State or other jurisdiction of incorporation or organization) (I.R.S. Employer Identification No.)

 

22 East Broadway, Gardner, Massachusetts 01440-3338

(Address of principal executive offices) (Zip Code)

 

(978) 630-1800

(Registrant’s telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o

   

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer o   Accelerated filer o
         
Non-accelerated filer o   Smaller reporting company x
(Do not check if a smaller reporting company)        

 

Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act). Yes o No x

   

The number of shares outstanding of the issuer’s common stock, par value $0.01 per share, at October 30, 2014 was 6,262,584 shares.

 

 
 

 

PRECISION OPTICS CORPORATION, INC.

 

Table of Contents

 

  Page
PART I — FINANCIAL INFORMATION 3
Item 1. Financial Statements 3
Consolidated Balance Sheets 3
Consolidated Statements of Operations for the Three Months Ended September 30, 2014 and 2013 4
Consolidated Statements of Cash Flows for the Three Months Ended September 30, 2014 and 2013 5
Notes to Consolidated Financial Statements 6
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations 9
Item 3. Quantitative and Qualitative Disclosures About Market Risk 13
Item 4. Controls and Procedures 13
   
PART II — OTHER INFORMATION 14
Item 1. Legal Proceedings 14
Item 1A. Risk Factors 14
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds 14
Item 3. Defaults Upon Senior Securities 14
Item 4. Mine Safety Disclosures (Not applicable.) 14
Item 5. Other Information 14
Item 6. Exhibits 15

 

2
 

 

PART I. FINANCIAL INFORMATION

  

Item 1. Financial Statements.

   

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(UNAUDITED)

 

   September 30,
2014
   June 30,
2014
 
ASSETS          
CURRENT ASSETS          
Cash and Cash Equivalents  $527,491   $202,380 
Accounts Receivable, net   680,301    531,049 
Inventories, net   911,949    988,878 
Prepaid Expenses   73,576    91,922 
Total Current Assets   2,193,317    1,814,229 
PROPERTY AND EQUIPMENT          
Machinery and Equipment   2,400,445    2,368,709 
Leasehold Improvements   553,596    553,596 
Furniture and Fixtures   148,303    148,303 
Vehicles   19,674    19,674 
    3,122,018    3,090,282 
           
Less: Accumulated Depreciation   (3,079,610)   (3,075,722)
Net Property and Equipment   42,408    14,560 
           
Patents, net   8,523    7,672 
           
TOTAL ASSETS  $2,244,248   $1,836,461 
LIABILITIES AND STOCKHOLDERS’ EQUITY (DEFICIT)          
CURRENT LIABILITIES          
Accounts Payable  $547,886   $715,192 
Customer Advances   420    26,200 
Accrued Employee Compensation   251,545    200,207 
Accrued Professional Services   17,755    60,250 
Accrued Warranty Expense   25,000    25,000 
Other Accrued Liabilities   8,810    69,028 
Total Current Liabilities   851,416    1,095,877 
STOCKHOLDERS’ EQUITY (DEFICIT)          
Common Stock, $0.01 par value - Authorized - 50,000,000 shares; Issued and Outstanding – 6,262,584 shares at September 30, 2014 and 4,455,134 shares at June 30, 2014   62,626    44,551 
Additional Paid-in Capital   43,077,362    42,146,750 
Accumulated Deficit   (41,747,156)   (41,450,717)
Total Stockholders’ Equity (Deficit)   1,392,832    740,584 
           
TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY (DEFICIT)  $2,244,248   $1,836,461 

 

The accompanying notes are an integral part of these consolidated interim financial statements.

 

3
 

 

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

FOR THE THREE MONTHS ENDED

SEPTEMBER 30, 2014 AND 2013

(UNAUDITED)

 

   Three Months
Ended September 30,
 
   2014   2013 
Revenues  $830,714   $907,426 
           
Cost of Goods Sold   718,576    647,192 
           
Gross Profit   112,138    260,234 
           
Research and Development Expenses, net   76,712    134,913 
           
Selling, General and Administrative Expenses   347,147    336,042 
           
Gain on Sale of Assets   (15,282)    
           
Total Operating Expenses   408,577    470,955 
           
           
Net Loss  $(296,439)  $(210,721)
           
Loss Per Share:          
Basic  $(0.05)  $(0.05)
Diluted  $(0.05)  $(0.05)
           
Weighted Average Common Shares Outstanding:          
Basic   6,069,131    4,455,134 
Diluted   6,069,131    4,455,134 

 

The accompanying notes are an integral part of these consolidated interim financial statements.

 

4
 

 

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE THREE MONTHS ENDED

SEPTEMBER 30, 2014 AND 2013

(UNAUDITED)

 

   Three Months
Ended September 30,
 
   2014   2013 
CASH FLOWS FROM OPERATING ACTIVITIES:          
Net Loss  $(296,439)  $(210,721)
Adjustments to Reconcile Net Loss to Net Cash Used In Operating Activities -          
Depreciation and Amortization   3,888    8,865 
Gain on Sale of Assets   (15,282)    
Stock-based Compensation Expense   27,000    33,609 
Non-cash Consulting Expense   11,250     
Changes in Operating Assets and Liabilities -          
Accounts Receivable, net   (149,252)   (94,490)
Inventories   76,929    90,791 
Prepaid Expenses   18,346    (24,858)
Accounts Payable   (244,207)   56,429 
Customer Advances   (25,780)   (18,958)
Accrued Expenses   2,391    12,300 
Net Cash Used In Operating Activities   (591,156)   (147,033)
           
CASH FLOWS FROM INVESTING ACTIVITIES:          
Additional Patent Costs   (851)   (8,524)
Purchases of Property and Equipment   (31,736)    
Proceeds from Sale of Assets   15,282     
Net Cash Used In Investing Activities   (17,305)   (8,524)
           
CASH FLOWS FROM FINANCING ACTIVITIES:          
Gross Proceeds from July 2014 Private Placement of Common Stock   980,291     
Private Placement Expenses Incurred and Paid as of September 30, 2014   (46,719)    
           
Net Cash Provided by Financing Activities   933,572     
           
NET INCREASE (DECREASE) IN CASH AND CASH EQUIVALENTS   325,111    (155,557)
CASH AND CASH EQUIVALENTS, BEGINNING OF PERIOD   202,380    1,034,587 
           
CASH AND CASH EQUIVALENTS, END OF PERIOD  $527,491   $879,030 
           
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:          
Cash Paid for Income Taxes  $912   $912 
SUPPLEMENTAL DISCLOSURE OF NON-CASH FINANCING ACTIVITIES:          
Issuance of 90,298 Shares of Common Stock to Consultants  $65,016   $ 
Private Placement Expenses Incurred But Not Yet Paid as of September 30, 2014  $76,901   $ 

 

The accompanying notes are an integral part of these consolidated interim financial statements.

 

5
 

 

PRECISION OPTICS CORPORATION, INC.

NOTES TO CONSOLIDATED INTERIM FINANCIAL STATEMENTS (UNAUDITED)

 

1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

Principles of Consolidation and Operations

 

The accompanying consolidated financial statements include the accounts of Precision Optics Corporation, Inc. and its wholly-owned subsidiaries (the “Company”). All significant intercompany accounts and transactions have been eliminated in consolidation.

 

These consolidated financial statements have been prepared by the Company, without audit, and reflect normal recurring adjustments which, in the opinion of management, are necessary for a fair statement of the results of the first quarter of the Company’s fiscal year 2015. These consolidated financial statements do not include all disclosures associated with annual consolidated financial statements and, accordingly, should be read in conjunction with footnotes contained in the Company’s consolidated financial statements for the year ended June 30, 2014 together with the Report of Independent Registered Public Accounting Firm filed under cover of the Company’s 2014 Annual Report on Form 10-K, filed with the Securities and Exchange Commission on September 29, 2014.

 

Use of Estimates

 

The preparation of these consolidated financial statements requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. The Company bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

 

Income (Loss) Per Share

 

Basic income (loss) per share is computed by dividing net income or net loss by the weighted average number of shares of common stock outstanding during the period. Diluted income (loss) per share is computed by dividing net income or net loss by the weighted average number of shares of common stock outstanding during the period, plus the number of potentially dilutive securities outstanding during the period such as stock options and warrants. For the three months ended September 30, 2014 and 2013, the effect of such securities was antidilutive and not included in the diluted calculation because of the net loss generated in these periods.

 

The following is the calculation of loss per share for the three months ended September 30, 2014 and 2013:

 

   Three Months
Ended September 30,
 
   2014   2013 
         
Net Loss – Basic and Diluted  $(296,439)  $(210,721)
           
Basic and Diluted Weighted Average Shares Outstanding   6,069,131    4,455,134 
           
Loss Per Share          
Basic  $(0.05)  $(0.05)
Diluted  $(0.05)  $(0.05)

 

The number of shares issuable upon the exercise of outstanding stock options and warrants that were excluded from the computation as their effect was antidilutive was approximately 3,794,000 and 3,435,000 for the three months ended September 30, 2014 and 2013, respectively.

 

Income Taxes

 

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

 

In assessing the likelihood of utilization of existing deferred tax assets, management has considered historical results of operations and the current operating environment. Based on this evaluation, a full valuation reserve has been provided for the deferred tax assets.

 

6
 

 

2.  INVENTORIES

 

Inventories are stated at the lower of cost (first-in, first-out) or market and consisted of the following:

 

   September 30,
2014
   June 30,
2014
 
Raw Materials  $367,615   $445,210 
Work-In-Progress   383,232    385,601 
Finished Goods   161,102    158,057 
Total Inventories  $911,949   $988,878 

    

3. STOCK-BASED COMPENSATION

 

Stock-based compensation costs recognized during the quarters ended September 30, 2014 and 2013 amounted to $27,000 and $33,609, respectively, and the costs were included in the accompanying consolidated statements of operations in: selling, general and administrative expenses (2014 - $27,000; 2013 - $32,050), research and development expenses (2014 - $0; 2013 - $550) and cost of goods sold (2014 - $0; 2013 - $1,009). No stock-based compensation has been capitalized because such amounts would have been immaterial.

 

The following tables summarize stock option activity for the quarter ended September 30, 2014:

 

    Options Outstanding  
    Number of
Shares
    Weighted Average
Exercise Price
    Weighted Average
Contractual Life
 
Outstanding at July 1, 2014     409,087     $ 4.49       6.27 years  
Grants     65,000       0.90          
Outstanding at September 30, 2014     474,087     $ 3.93       6.54 years  

 

Information related to the stock options outstanding as of September 30, 2014 is as follows:

 

Range of Exercise
Prices
    Number of
Shares
    Weighted-Average
Remaining
Contractual
Life (years)
    Weighted-Average
Exercise Price
    Exercisable
Number
of Shares
    Exercisable
Weighted-Average
Exercise Price
 
$ 1.20       207,800       7.42     $ 1.20       207,800     $             1.20  
$ 0.90       65,000       9.78       0.90       30,000       0.90  
$ 0.90       9,000       9.26       0.90       9,000       0.90  
$ 0.85       9,000       8.26       0.85       9,000       0.85  
$ 0.55       49,500       7.37       0.55       49,500       0.55  
$ 0.27       40,000       6.79       0.27       40,000       0.27  
$ 1.35       1,200       5.15       1.35       1,200       1.35  
$ 1.25       1,200       4.16       1.25       1,200       1.25  
$ 6.25       1,600       2.16       6.25       1,600       6.25  
$ 7.75       1,200       3.16       7.75       1,200       7.75  
$ 11.50       800       1.16       11.50       800       11.50  
$ 13.75       50,427       1.61       13.75       50,427       13.75  
$ 20.75       37,360       0.71       20.75       37,360       20.75  
$ 0.27–$20.75       474,087       6.54     $ 3.93       439,087     $ 6.21  

 

The aggregate intrinsic value of the Company’s “in-the-money” outstanding and exercisable options as of September 30, 2014 was $29,100.

 

7
 

  

4. SALE OF STOCK

  

On July 1 through July 7, 2014, the Company closed on agreements with institutional and accredited investors (the “Investors”) for the sale and purchase of 1,717,152 shares of the Company’s common stock, $0.01 par value at a purchase price of $0.60 per share (the “Shares”). The Company received $1,030,291 in gross proceeds from the offering. The Company is using the net proceeds from this placement for general working capital purposes. Of this amount, $50,000 was received in June 2014 and the remainder was received in July 2014.

 

In conjunction with the placement, the Company also entered into a registration rights agreement with the Investors, whereby the Company was obligated to file a registration statement with the Securities Exchange Commission on or before forty-five calendar days after July 1, 2014 to register the resale by the Investors of the 1,717,152 shares of the common stock purchased in the placement. Subsequent to the execution of the agreement, the parties agreed to extend the time period by which the Company was obligated to file a registration statement with the Securities Exchange Commission. The registration statement was filed with the Securities Exchange Commission on October 9, 2014, in accordance with the extended timetable, and became effective on October 30, 2014.

 

In conjunction with the offering, certain anti-dilution provisions of the warrants issued in conjunction with the Company’s June 25, 2008 and September 28, 2012 financing transactions were triggered. As a result, the number of existing June 25, 2008 warrants increased from 469,831 to 538,253 and the related exercise price of the warrants decreased from $1.18 per share to $1.03 per share. And the number of existing September 28, 2012 warrants increased from 1,944,475 to 2,189,724 and 194,446 to 217,322, respectively, and the related exercise price decreased from $1.25 to $1.11 and from $0.95 to $0.85, respectively.

 

In July 2014, the Company issued 78,000 restricted shares of our common stock, with a fair value of $56,160 to Mr. Jeff DiRubio, and issued 12,298 restricted shares of our common stock with a fair value of $8,854 to Mr. Kevin Dahill as compensation for services rendered to the Company. These amounts were accrued in the June 30, 2014 consolidated financial statements.

  

5. SALE OF ASSETS

 

During the quarter ended September 30, 2014, the Company sold equipment that was previously written off for proceeds totaling $15,282, and recorded a gain of $15,282, which is included within operating expenses in the accompanying consolidated statements of operations.

 

8
 

 

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

 

The following discussion of our financial condition and results of operations should be read in conjunction with the unaudited condensed consolidated financial statements and notes to those statements included elsewhere in this Quarterly Report on Form 10-Q for the quarter ended September 30, 2014 and with our audited consolidated financial statements for the year ended June 30, 2014 included in our Annual Report on Form 10-K, filed with the Securities and Exchange Commission on September 29, 2014.

 

This Quarterly Report on Form 10-Q contains forward-looking statements. When used in this report, the words “expects,” “anticipates,” “suggests,” “believes,” “intends,” “estimates,” “plans,” “projects,” “continue,” “ongoing,” “potential,” “expect,” “predict,” “believe,” “intend,” “may,” “will,” “should,” “could,” “would” and similar expressions are intended to identify forward-looking statements. You should not place undue reliance on these forward-looking statements.  Our actual results could differ materially from those anticipated in the forward-looking statements for many reasons, including the risks described in this report, the risks described in our Annual Report on Form 10-K for the year ended June 30, 2014 and other reports we file with the Securities and Exchange Commission. Although we believe the expectations reflected in the forward-looking statements are reasonable, they relate only to events as of the date on which the statements are made.  We do not intend to update any of the forward-looking statements after the date of this report to conform these statements to actual results or to changes in our expectations, except as required by law.

 

Overview

 

We have been a developer and manufacturer of advanced optical instruments since 1982. Today, the vast majority of our business is the design and manufacture of high-quality medical devices and approximately 10% of our business is the design and manufacture of military and industrial products. Our medical instrumentation line includes traditional endoscopes and endocouplers as well as other custom imaging and illumination products for use in minimally invasive surgical procedures. Much of our recent development efforts have been targeted at the development of next generation endoscopes. For the last ten years, we have funded internal research and development programs to develop next generation capabilities for designing and manufacturing 3D endoscopes and very small Microprecision™ lenses, anticipating future requirements as the surgical community continues to demand smaller and more enhanced imaging systems for minimally invasive surgery. Our unique proprietary technology in these areas, combined with recent developments in the areas of 3D displays and millimeter sized image sensors, has allowed us to begin commercialization of these technologies. We believe that new products based on these technologies provide enhanced imaging for existing surgical procedures and can enable development of many new procedures.

 

We are registered to the ISO 9001:2008 and ISO 13485:2003 Quality Standards and comply with the FDA Good Manufacturing Practices and the European Union Medical Device Directive for CE marking of our medical products. Our internet website is www.poci.com. Information on our website is not intended to be integrated into this report.

 

The areas in which we do business are highly competitive and include both foreign and domestic competitors. Many of our competitors are larger and have substantially greater resources than we do. Furthermore, other domestic or foreign companies, some with greater financial resources than we have, may seek to produce products or services that compete with ours. We routinely outsource specialized production efforts as required to obtain the most cost effective production. Over the years, we have achieved extensive experience collaborating with other optical specialists worldwide and since the 1990s, we have maintained a Hong Kong subsidiary to support business and quality control activities as required throughout Asia.

 

We believe that competition for sales of our medical products and services, which have been principally sold to original equipment manufacturer, or OEM, customers, is based on performance and other technical features, as well as other factors, such as scheduling and reliability, in addition to competitive price.

 

We believe that our future success depends to a large degree on our ability to continue to conceive and to develop new optical products and services to enhance the performance characteristics and methods of manufacture of existing products. Accordingly, we expect to continue seeking and obtaining product-related design and development contracts with customers and to selectively invest our own funds on research and development, particularly in the areas of Microprecision™ optics, micro medical cameras and 3D endoscopes.

 

 

9
 

 

Critical Accounting Policies and Estimates

 

General

 

This management’s discussion and analysis of financial condition and results of operations are based upon our unaudited consolidated financial statements, which have been prepared without audit, pursuant to the rules and regulations of the Securities and Exchange Commission. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

 

There have been no significant changes in our critical accounting policies as disclosed in the Notes to our Financial Statements contained in our Annual Report on Form 10-K for the year ended June 30, 2014 filed with the Securities and Exchange Commission on September 29, 2014.

 

Results of Operations

 

Our total revenues for the quarter ended September 30, 2014, the first quarter of our fiscal year 2015, were $830,714, as compared to $907,426 for the same period in the prior year, a decrease of $76,712, or 8.5%. The decrease in revenues in the current quarter compared to last year was primarily due to lower unit volume sales of endocouplers and the advanced surgical visualization system used in spinal surgery, partially offset by higher sales of rigid endoscopes and initial shipments of new ultra small fiberscopes and the recently introduced 3D surgical microscope adapter.

 

Revenues from our largest customers, as a percentage of our total revenues, for the quarters ended September 30, 2014 and 2013, were as follows:

 

         
   Three Months
Ended September 30,
 
   2014   2013 
Customer A   25%   17%
Customer B   12     
Customer C   10    12 
Customer D   7    15 
Customer E       28 
All Others   46    28 
    100%   100%

   

No other customer accounted for more than 10% of our revenues during those quarters.

 

Gross profit for the quarter ended September 30, 2014 was $112,138, as compared to $260,234 for the same period in the prior year, which reflects a decrease of $148,096. Gross profit for the quarter ended September 30, 2014 as a percentage of our revenues was 13.5%, a decrease from the gross profit percentage of 28.7% for the same period in the prior year. The decrease in our gross profit percentage was due primarily to lower overall unit sales volume compared to the same period in the prior year, and the incurrence of certain start-up costs and inefficiencies related to the production of several products during the quarter ended September 30, 2014. Our quarterly gross profit and gross profit percentage depend on a number of factors, including overall sales volume and mix of products sold, including the costs of initial production in connection with new products, among others, and therefore may vary from quarter to quarter.

 

Research and development expenses were $76,712 for the quarter ended September 30, 2014, as compared to $134,913 for the same period in the prior year, which reflects a decrease of $58,201, or 43.1%. The decrease in research and development expenses for the quarter ended September 30, 2014, as compared to same period in the prior year, was primarily due to lower labor and materials costs incurred on product development activities and higher customer reimbursements of related costs. Quarterly research and development expenses depend on our assessment of new product opportunities and available resources. Research and development expenses were net of reimbursement of related costs of $18,612 and $10,200 during the quarters ended September 30, 2014 and 2013, respectively.

 

Selling, general and administrative expenses were $347,147 for the quarter ended September 30, 2014, as compared to $336,042 for the same period in the prior year, which reflects an increase of $11,105, or 3.3%. The increase in selling, general and administrative expenses for the quarter ended September 30, 2014, as compared to the same period in the prior year, was primarily due to higher consulting and selling expenses.

 

No income tax provision was recorded in the first quarter of fiscal year 2015 or 2014 because of the losses generated in those periods.

 

10
 

 

Liquidity and Capital Resources

 

We believe the following technology areas continue to represent significant opportunities for our future sales growth:

 

  Microprecision™ optical elements and micro medical camera assemblies with sizes on the order of 1 mm and smaller, that enable the introduction of imaging capabilities in locations in the body previously inaccessible and, when coupled with the latest in small complementary metal-oxide-semiconductor (CMOS) technology, enable production of single-use endoscopes that eliminate the risks associated with re-sterilization of existing endoscopes; and

 

  next generation handheld 3D endoscopes that provide high definition 3D images for use in minimally invasive surgery.

 

We compete in a highly technical, very competitive and in most cases, price driven segment of the medical instrument marketplace where products can take years to develop and introduce to distributors and end users. Furthermore, research and development, manufacturing, marketing and distribution activities are strictly regulated by the U.S. Food and Drug Administration, or FDA, International Organization for Standardization, or ISO and other regulatory bodies that, while intended to enhance the ultimate quality and functionality of products produced, can contribute to the significant cost and time needed to maintain existing products, and to develop and introduce product enhancements and new product innovations.

 

We have traditionally funded working capital needs through product sales, management of working capital components of our business, and by cash received from public and private offerings of our common stock, warrants to purchase shares of our common stock or convertible notes. We have incurred quarter to quarter operating losses during our efforts to develop current products including Microprecision™ optical elements, micro medical camera assemblies and 3D endoscopes. Our management expects that such operating losses will continue until sales increase to breakeven and profitable levels. Our management also believes that the opportunities represented by these products have the potential to generate sales increases to achieve breakeven and profitable results.

 

Until we achieve breakeven and profitable results, we will be required to pursue several options to manage cash flow and raise capital, including issuing debt or equity or entering into a strategic alliance. The sale of additional equity or convertible debt securities would result in additional dilution to our current stockholders, and debt financing, if available, may involve restrictive covenants that could restrict our operations or finances. Financing may not be available in amounts or on terms acceptable to us, if at all. If we cannot raise funds on acceptable terms or achieve positive cash flow, we may not be able to continue to conduct operations, develop new products, grow market share, take advantage of future opportunities or respond to competitive pressures or unanticipated requirements, any of which would negatively impact our business, operating results and financial condition.

 

During the quarter ended September 30, 2014, we incurred a net loss of $296,439 and used cash in operating activities of $591,156. As of September 30, 2014, cash and cash equivalents were $527,491, accounts receivable were $680,301, and current liabilities were $851,416. We incurred a net loss of $210,721 during the quarter ended September 30, 2013 and used cash in operating activities of $147,0333. As of June 30, 2014, cash and cash equivalents were $202,380, accounts receivable were $531,049, and current liabilities were $1,095,877.

 

On July 1 through July 7, 2014, we closed agreements with institutional and accredited investors for the sale and purchase of 1,717,152 shares of the Company’s common stock at a purchase price of $0.60 per share. We received $1,030,291 in gross proceeds from the offering. We are using the net proceeds from this placement for general working capital purposes. Of this amount, $50,000 was received in June 2014 and the remainder was received in July 2014.

 

Capital equipment expenditures during the quarter ended September 30, 2014 and 2013 were $31,736and $0, respectively. Future capital equipment expenditures will be dependent upon future sales and success of on-going research and development efforts.

 

Contractual cash commitments for the fiscal years subsequent to September 30, 2014 are summarized as follows:

 

   2015   2016   Thereafter   Total 
Operating Leases  $24,915   $776   $776   $26,467 

 

We have contractual cash commitments related to open purchase orders as of September 30, 2014 of approximately $298,000.

 

Trends and Uncertainties That May Affect Future Results

 

We are excited about the continued development, commercialization, and market acceptance of our new products and technical innovations based upon our unique proprietary technology. For the year ended June 30, 2014, approximately 75% of our sales were made to our top six customers. Of these, two are large, international, medical device companies who have been our customers for many years. Both of these customers continue to purchase products that we developed over five years ago, and both now purchase new products that were developed and launched into production by us more recently. The other four top customers purchase products that we developed in the last couple years, and which rely heavily on our unique, proprietary Microprecision™ lens technology and optical visualization system expertise.

 

11
 

 

In April 2012, we accepted an order from one of these customers to purchase endoscopes for a total purchase amount of $1,032,000. We have now completed pre-production activities and recently began production shipments against this order, which relies heavily on our proprietary Microprecision™ technology. During the last year, we have supplied engineering and manufacturing services to another of these new customers, who is developing next generation otoscope devices used for the treatment of ears. We have delivered pre-production otoscopes, which have performed well during testing by our customer. We continue to sell engineering and manufacturing services to this customer and expect to ultimately manufacture this product when it is released to production in the next 9 to 12 months. Also during the last year, we provided two of our largest customers with new optical lenses and prisms with small sizes, enabled by our proprietary Microprecision™ technology.

 

We continue to work with new customers to lay the groundwork for future products. During fiscal 2014, we provided design and engineering services to a major consumer and professional electronics and camera manufacturer to develop a new 3D adapter for use with ophthalmologic microscopes for use in eye treatments. Utilizing our extensive experience and proprietary design approaches for 3D visualization, we have delivered pre-production units that our customer demonstrated to leaders in the ophthalmologic community with very positive response. We received an initial order for production units of this device in July 2014 and are beginning production now.

 

During fiscal year 2014, we began work with two additional customers and continued work with an existing customer to provide design and engineering services for devices that are enabled by our Microprecision™ lenses and proprietary technology for the design and manufacture of small cameras for use in medical applications. For one of these projects, we have begun high volume production. The other two are expected to begin production in the next 12 months.

 

We have also focused recent operational efforts on sales and marketing activities intended to broaden awareness of the benefits of our new technology platforms, which we believe are ready for general application to medical device projects requiring surgery-grade visualization from sub-millimeter sized devices and handheld 3D endoscopy. We continue to attend trade shows to announce our new technology, most recently at the Medical Design & Manufacturing East show in New York City in June 2014. During fiscal year 2014, we advertised, for the first time, through a business-to-business e-commerce platform. Photonics Online, www.photonicsonline.com , has a target audience of optical engineering design and manufacturing professionals and has over 34,000 subscribers to their monthly email newsletter. Because of the increased awareness of our new technology generated by our presence at trade shows, advertising on Photonics Online and direct email messages to our own customer database that we have built over the last 30 years, we have more than doubled the rate that we received requests for quotes during fiscal year 2014. We are continuing to build on recent successes in this area by continuing the activities summarized above while adding additional advertising through a second business-to-business e-commerce platform, Med Device Online, www.meddeviceonline.com, which targets technical professionals working in the medical device industry. We do not intend for the information on this website to be incorporated into this report.

 

Due to the introductory stage of many of our new products and the unpredictable timing of orders from customers, it is difficult to predict with certainty the detailed rate of future revenue growth. As summarized above, we have received significant new orders for a number of new products which rely on our Microprecision™ lens technology and associated capabilities. We believe these orders will help to increase our revenues in future quarters. Also, we expect that current discussions with existing and new potential customers could lead to increases in our revenues. To continue to support orders for new products as well as ongoing and future discussions, we intend to continue to develop and commercialize new products and technical innovations, including:

 

  new components and instruments utilizing our patented Microprecision™ lens technology for optical components and micro medical camera assemblies with sizes on the order of 1 mm and smaller; and
     
  new 3D imaging technology for use in handheld 3D endoscopes, and for 3D monitor-based visualization through surgical microscopes.

 

Over the past few years, we have implemented significant changes in new product and technology development by shifting the emphasis of research and development efforts from developing underlying technologies to commercializing the applications of these new technologies. These efforts have already been realized to some degree in the area of Microprecision™ lenses with ongoing shipments now in place, including shipments against orders for micro medical camera assemblies. While most of our current orders for Microprecision™ lenses support medical applications, we are now beginning to explore additional applications including those in the defense and surveillance markets.

 

We have also developed and manufactured prototypes of a new 3D endoscope with high definition quality imaging and 10 mm diameter for use in general laparoscopic surgery. This next generation 3D endoscope has been evaluated by a number of medical professionals and has been received enthusiastically. We believe that with the advent of commercially available high quality flat panel 3D displays, handheld 3D endoscopy represents an opportunity for sales growth for our Company. In addition, the technology we have developed for 3D endoscopy can also be used for 3D monitor-based visualization through surgical microscopes.

 

Off-Balance Sheet Arrangements

 

We currently have no off-balance sheet arrangements that have or are reasonably likely to have a current or future material effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.

 

12
 

  

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

 

As a smaller reporting company, as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

 

Item 4. Controls and Procedures.

 

Management’s Evaluation of Disclosure Controls and Procedures

 

Our Chief Executive Officer and our Chief Financial Officer evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Quarterly Report on Form 10-Q. Based on this evaluation, our Chief Executive Officer and our Chief Financial Officer have concluded that our disclosure controls and procedures, including internal control over financial reporting, were not effective, as of September 30, 2014, to ensure the information we are required to disclose in reports that we file or submit under the Securities Exchange Act of 1934, as amended (i) is recorded, processed, summarized, and reported within the time periods specified in Securities and Exchange Commission rules and forms, and (ii) is accumulated and communicated to our management, including our Chief Executive Officer and our Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. Our disclosure controls and procedures are intended to be designed to provide reasonable assurance that such information is accumulated and communicated to our management. Based on this evaluation, our management concluded that our internal control over financial reporting was not effective as of September 30, 2014.

 

The following is a description of two material weaknesses in our internal control over financial reporting:

 

Segregation of Duties: As previously disclosed in our Annual Reports on Form 10-K for the fiscal years ended June 30, 2008-2014, our management identified a control deficiency during the 2008 fiscal year because we lacked sufficient staff to segregate accounting duties. We believe the control deficiency resulted primarily because we have the equivalent of one and one-half persons performing all accounting-related on-site duties. As a result, we did not maintain adequate segregation of duties within our critical financial reporting applications, the related modules and financial reporting processes. This control deficiency could result in a misstatement of balance sheet and income statement accounts in our interim or annual consolidated financial statements that would not be detected. Accordingly, management has determined that this control deficiency constitutes a material weakness.

 

To address and remediate the material weakness in internal control over financial reporting described above, beginning with the quarter ended September 30, 2008, we instituted a procedure whereby our Chief Executive Officer, our Chief Financial Officer and other members of our Board of Directors perform a higher level review of the quarterly and annual reports on Form 10-Q and Form 10-K prior to filing.

 

We believe that the step outlined above strengthens our internal control over financial reporting and mitigates the material weakness described above. As part of our assessment of internal control over financial reporting for the fiscal year ended June 30, 2014, our management has evaluated this additional control and has determined that it is operating effectively.

 

Inventory Valuation: As previously disclosed in our Annual Reports on Form 10-K for the fiscal years ended June 30, 2009-2014, we reported a material weakness with respect to the valuation of our inventories. Specifically, the amounts used to value our inventory at June 30, 2009 with respect to overhead rates and purchased items were often inconsistent with the supporting documentation, due to year-to-year changes in overhead rates and costs of purchased items that were not properly reflected in inventory valuation. Accordingly, management had determined that this control deficiency constituted a material weakness as of June 30, 2009. One audit adjustment of approximately $58,000 to our audited financial statements as of June 30, 2011 was necessary as a result of this condition.

 

Changes in Internal Control over Financial Reporting

 

There was no change in our internal control over financial reporting that occurred during the first quarter of our fiscal year covered by this Quarterly Report on Form 10-Q that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

To address and remediate the material weakness in internal control over financial reporting described above, beginning in the quarter ended September 30, 2009 and continuing through the quarter ended September 30, 2014, we implemented processes to improve our inventory controls and documentation surrounding inventory valuation for overhead rates, and performed procedures to ensure that the pricing of inventory items was consistent with the supporting documentation. We believe that the step outlined above strengthens our internal control over financial reporting and mitigates the material weakness described above.

 

We intend to continue to remediate material weaknesses and enhance our internal controls but cannot guarantee that our efforts will result in remediation of our material weaknesses or that new issues will not be exposed in this process.

 

13
 

 

PART II. OTHER INFORMATION

 

Item 1. Legal Proceedings.

 

Our Company, on occasion, may be involved in legal matters arising in the ordinary course of our business. While management believes that such matters are currently insignificant, matters arising in the ordinary course of business for which we are or could become involved in litigation may have a material adverse effect on our business, financial condition or results of operations. We are not aware of any pending or threatened litigation against us or our officers and directors in their capacity as such that could have a material impact on our operations or finances.

 

Item 1A. Risk Factors.

 

There have been no material changes from the risk factors previously disclosed in our annual report on Form 10-K for the fiscal year ended June 30, 2014, as filed with the Securities and Exchange Commission on September 29, 2014.

 

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.

 

In July 2014, we issued a total of 90,298 unregistered shares of our common stock to two consultants as consideration for consulting services, and such shares were valued at $65,016.

 

Item 3. Defaults Upon Senior Securities.

 

As of September 30, 2014, we are not in default with respect to any indebtedness.

 

Item 4. Mine Safety Disclosures.

 

Not applicable.

 

Item 5. Other Information.

 

None.

 

14
 

 

Item 6. Exhibits.

 

Exhibit   Description
     
2.1   Asset Purchase Agreement between the Company and Optometrics Corporation, dated January 18, 2008 (included as Exhibit 2.1 to the Form 8-K filed January 25, 2008 and incorporated herein by reference).
     
3.1   Articles of Organization of Precision Optics Corporation, Inc., as amended (included as Exhibit 3.1 to the Form SB-2 filed March 16, 2007 and incorporated herein by reference).
     
3.2   Bylaws of Precision Optics Corporation, Inc. (included as Exhibit 3.2 to the Form S-1 filed December 18, 2008 and incorporated herein by reference).
     
3.3   Articles of Amendment to the Articles of Organization of Precision Optics Corporation, Inc., dated November 25, 2008 and effective December 11, 2008 (included as Exhibit 3.1 to the Form 8-K filed December 11, 2008 and incorporated herein by reference).
     
4.1   Registration Rights Agreement by and among the Company and each investor named therein, dated February 1, 2007 (included as Exhibit 4.1 to the Form 8-K filed February 2, 2007 and incorporated herein by reference).
     
4.2   Form of Warrant to Purchase Shares of Common Stock (included as Exhibit 4.2 to the Form 8-K filed February 2, 2007 and incorporated herein by reference).
     
4.3   Registration Rights Agreement by and among the Company and each investor named therein, dated June 25, 2008 (included as Exhibit 4.1 to the Form 8-K filed June 27, 2008 and incorporated herein by reference).
     
4.4   Form of Warrant to Purchase Shares of Common Stock, dated June 25, 2008 (included as Exhibit 4.2 to the Form 8-K filed June 27, 2008 and incorporated herein by reference).
     
4.5   Form of 10% Senior Secured Convertible Note, dated June 25, 2008 (included as Exhibit 4.3 to the Form 8-K filed June 27, 2008 and incorporated herein by reference).
     
4.6   Form of Warrant to Purchase Shares of Common Stock, dated September 28, 2012 (included as Exhibit 4.1 to the Form 8-K filed October 2, 2012 and incorporated herein by reference).
     
4.7   Registration Rights Agreement by and among the Company and each investor named therein, dated September 28, 2012 (included as Exhibit 4.2 to the Form 8-K filed October 2, 2012 and incorporated herein by reference).
     
4.8   Warrant to Purchase Shares of Common Stock issued to Loewen, Ondaatje, McCutcheon USA LTD, dated September 28, 2012 (included as Exhibit 4.3 to the Form 8-K filed October 2, 2012 and incorporated herein by reference).
     
4.9   Form of Warrant to Purchase Shares of Common Stock (Special Situations Settlement), dated February 12, 2013 (included as Exhibit 4.1 to the Form 8-K filed February 13, 2013 and incorporated herein by reference).
     
4.10   Registration Rights Agreement by and among the Company, Special Situations Fund III QP, L.P. and Special Situations Private Equity Fund, L.P., dated February 12, 2013 (included as Exhibit 4.2 to the Form 8-K filed February 13, 2013 and incorporated herein by reference).
     
4.11   Form of Warrant to Purchase Shares of Common Stock (Pitlor and Schumsky Settlement), dated February 12, 2013 (included as Exhibit 4.3 to the Form 8-K filed February 13, 2013 and incorporated herein by reference).
     
10.1   Precision Optics Corporation, Inc. 1997 Incentive Plan, as amended and restated (included as Exhibit 10.1 to the Form 10-QSB filed November 13, 2003 and incorporated herein by reference).
     
10.2   Precision Optics Corporation, Inc. 2006 Equity Incentive Plan (included as Exhibit 99.1 to the Form 8-K filed December 4, 2006 and incorporated herein by reference).
     
10.3   Form of Nonstatutory Stock Option Certificate (included as Exhibit 10.2 to the Form 10-QSB filed February 14, 2007 and incorporated herein by reference).

 

15
 

 

     
10.4   Consulting Agreement between the Company and Jack P. Dreimiller, dated August 15, 2008 (included as Exhibit 10.1 to the Form 8-K filed August 18, 2008 and incorporated herein by reference).
     
10.5   Compensation Agreement with Richard E. Forkey, dated December 3, 2010 (included as Exhibit 10.11 to the Form 8-K filed December 6, 2010 and incorporated herein by reference).
     
10.6   Compensation Agreement with Joseph N. Forkey, dated December 3, 2010 (included as Exhibit 10.12 to the Form 8-K filed December 6, 2010 and incorporated herein by reference).
     
10.7   Compensation Agreement with Joel R. Pitlor, dated December 3, 2010 (included as Exhibit 10.13 to the Form 8-K filed December 6, 2010 and incorporated herein by reference).
     
10.8   Asset Purchase Agreement between the Company and Intuitive Surgical Operations, Inc., dated July 27, 2011 (included as Exhibit 10.1 to the Form 8-K filed August 3, 2011 and incorporated herein by reference).
     
10.9   Precision Optics Corporation, Inc. 2011 Equity Incentive Plan, dated October 13, 2011 (included as Exhibit 10.2 to Form S-8 filed October 14, 2011, and incorporated herein by reference.)
     
10.10   Precision Optics Corporation, Inc. 2011 Deferred Compensation Plan, dated October 13, 2011 (included as Exhibit 10.3 to Form S-8 filed October 14, 2011, and incorporated herein by reference.)
     
10.11   Side Letter Agreement to the Compensation Agreement with Richard E. Forkey, dated October 14, 2011 (included as Exhibit 10.4 to the Form 8-K filed October 19, 2011 and incorporated herein by reference).
     
10.12   Side Letter Agreement to the Compensation Agreement with Joseph N. Forkey, dated October 14, 2011 (included as Exhibit 10.5 to the Form 8-K filed October 19, 2011 and incorporated herein by reference).
     
10.13   Side Letter Agreement to the Compensation Agreement with Joel N. Pitlor, dated October 14, 2011 (included as Exhibit 10.6 to the Form 8-K filed October 19, 2011 and incorporated herein by reference).
     
10.14   Purchase Agreement by and among the Company and each investor named therein, dated September 28, 2012 (included as Exhibit 10.1 to the Form 8-K filed October 2, 2012 and incorporated herein by reference).
     
10.15   Settlement Agreement by and among the Company, Special Situations Fund III QP, L.P. and Special Situations Private Equity Fund, L.P., dated February 12, 2013 (included as Exhibit 10.1 to the Form 8-K filed February 13, 2013 and incorporated herein by reference).
     
10.16   Settlement Agreement by and between the Company and Joel Pitlor, dated February 12, 2013 (included as Exhibit 10.2 to the Form 8-K filed February 13, 2013 and incorporated herein by reference).
     
10.17   Settlement Agreement by and between the Company and Arnold Schumsky, dated February 12, 2013 (included as Exhibit 10.3 to the Form 8-K filed February 13, 2013 and incorporated herein by reference).
     
31.1   Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (filed herewith).
     
31.2   Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (filed herewith).
     
32.1   Certification of Officers pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (filed herewith).
     
101.INS*   XBRL Instance Document (filed herewith).
101.SCH*   XBRL Taxonomy Extension Schema (filed herewith).
101.CAL*   XBRL Taxonomy Extension Calculation Linkbase (filed herewith).
101.DEF*   XBRL Taxonomy Extension Definition Linkbase (filed herewith).
101.LAB*   XBRL Taxonomy Extension Label Linkbase (filed herewith).
101.PRE*   XBRL Taxonomy Extension Presentation Linkbase (filed herewith).

 

* Pursuant to Rule 406T of Regulation S-T, the Interactive Data Files on Exhibit 101 hereto are deemed not filed or part of a report for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections.

 

16
 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

  PRECISION OPTICS CORPORATION, INC.
     
Date: November 13, 2014 By: /s/ Joseph N. Forkey
    Joseph N. Forkey
   

Chief Executive Officer

(Principal Executive Officer)

     
     
Date: November 13, 2014 By: /s/ Jack P. Dreimiller
    Jack P. Dreimiller
   

Chief Financial Officer 

(Principal Financial Officer and Principal Accounting Officer)

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

17