UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
x | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended December 31, 2011
OR
¨ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from to
Commission File Number: 001-34756
Tesla Motors, Inc.
(Exact name of registrant as specified in its charter)
Delaware | 91-2197729 | |
(State or other jurisdiction of incorporation or organization) |
(I.R.S. Employer Identification No.) | |
3500 Deer Creek Road Palo Alto, California |
94304 | |
(Address of principal executive offices) | (Zip Code) |
(650) 681-5000
(Registrants telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
Name of each exchange on which registered | |
Common Stock, $0.001 par value | The NASDAQ Stock Market LLC |
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ¨ No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 (Exchange Act) during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrants knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of large accelerated filer, accelerated filer, and smaller reporting company in Rule 12b-2 of the Exchange Act:
Large accelerated filer | x | Accelerated filer | ¨ | |||
Non-accelerated filer | ¨ (Do not check if a smaller reporting company) | Smaller reporting company | ¨ |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x
The aggregate market value of voting stock held by non-affiliates of the registrant, as of June 30, 2011, the last day of registrants most recently completed second fiscal quarter, was $1,854,208,453 (based on the closing price for shares of the registrants Common Stock as reported by the NASDAQ Global Select Market on June 30, 2011). Shares of Common Stock held by each executive officer, director, and holder of 5% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
As of January 31, 2012, there were 104,604,044 shares of the registrants Common Stock outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrants Proxy Statement for the 2012 Annual Meeting of Stockholders are incorporated herein by reference in Part III of this Annual Report on Form 10-K to the extent stated herein. Such proxy statement will be filed with the Securities and Exchange Commission within 120 days of the registrants fiscal year ended December 31, 2011.
TESLA MOTORS, INC.
ANNUAL REPORT ON FORM 10-K FOR THE YEAR ENDED DECEMBER 31, 2011
2
Forward-Looking Statements
The discussions in this Annual Report on Form 10-K contain forward-looking statements reflecting our current expectations that involve risks and uncertainties. These forward-looking statements include, but are not limited to, statements concerning our strategy, future operations, future financial position, future revenues, projected costs, expectations regarding demand and acceptance for our technologies, growth opportunities and trends in the market in which we operate, prospects and plans and objectives of management. The words anticipates, believes, estimates, expects, intends, may, plans, projects, will, would and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements that we make. These forward-looking statements involve risks and uncertainties that could cause our actual results to differ materially from those in the forward-looking statements, including, without limitation, the risks set forth in Part I, Item 1A, Risk Factors in this Annual Report on Form 10-K and in our other filings with the Securities and Exchange Commission. We do not assume any obligation to update any forward-looking statements.
3
PART I
ITEM 1. | BUSINESS |
We design, develop, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components. We own our sales and service network and have operationally structured our business in a manner that we believe will enable us to rapidly develop and launch advanced electric vehicles and technologies. We believe our vehicles, electric vehicle engineering expertise, and operational structure differentiates us from incumbent automobile manufacturers.
We are the first company to commercially produce a federally-compliant electric vehicle, the Tesla Roadster, which achieves a market-leading range on a single charge combined with attractive design, driving performance and zero tailpipe emissions. Our Tesla Roadster offers impressive acceleration and performance without producing any tailpipe emissions. The Tesla Roadsters proprietary electric vehicle powertrain system is the foundation of our business and, with design enhancements, will also form the basis for our Model S sedan, our Model X crossover, as well as future vehicles.
Model S is in an advanced stage of development and is currently scheduled to commence customer deliveries by July 2012. We expect that Model S will be manufactured with an adaptable platform architecture upon which other future vehicles, including our Model X crossover, will be based. We revealed a prototype of the Model X crossover in February 2012. We plan to start Model X production in late 2013 and ramp up to significant customer deliveries in early 2014. This unique vehicle has been designed to fill the niche between the roominess of a minivan and the style of an SUV, while having high performance features such as a dual motor all-wheel drive system.
In addition to developing our own vehicles, we provide services for the development of electric powertrain components and sell electric powertrain components to other automotive manufacturers. We have provided development services and powertrain components to Daimler AG (Daimler) for its Smart fortwo and A-Class electric vehicles. We recently announced the receipt of an initial purchase order for the development of a full powertrain system for an additional Mercedes Benz vehicle from Daimler. We also have almost completed a development services program to produce a full electric powertrain system for Toyota Motor Corporation (Toyota) for use in its RAV4 EV. We anticipate beginning to ship these systems to Toyota during the first half of 2012 under our supply and services agreement.
The commercial production of a highway capable, fully electric vehicle that meets consumers range and performance expectations requires substantial design, engineering, and integration work on almost every system of our vehicles. Our roots in Silicon Valley have enabled us to recruit engineers with strong skills in electrical engineering, power electronics and software engineering. We have complemented this talent base with automotive engineers with substantial expertise in vehicle engineering and manufacturing. Our ability to combine expertise in electric powertrain and vehicle engineering provides a broad capability in electric vehicle design and systems integration. We believe these capabilities, coupled with our focus solely on electric vehicle technology as well as our strong inhouse engineering and manufacturing capacity, will enable us to sustain the electric vehicle industry leadership we created through the production of the Tesla Roadster.
We sell and service our Tesla Roadster though our company-owned sales and service network in the North America, Europe and Asia. Our intent is to offer a compelling customer experience while gathering rapid customer feedback and achieving operating efficiencies, better control over the costs of inventory, warranty service, pricing, and the development of the Tesla brand. Our Tesla stores do not carry large vehicle inventories and, as a result, do not require corresponding large floor spaces. We believe the benefits we receive from distribution ownership, combined with our product design based on modularity and common platforms, will enable us to improve the speed of product development and improve the capital efficiency of our business. We believe that this approach provides us with a competitive advantage as compared to incumbent automobile manufacturers.
4
Our first vehicle, the Tesla Roadster, can accelerate from zero to 60 miles per hour in 3.9 seconds and has a maximum speed of approximately 120 miles per hour. The Roadster Sport version can accelerate from zero to 60 miles per hour in 3.7 seconds. The Tesla Roadster has a range of 245 miles on a single charge, as determined using the United States Environmental Protection Agencys (EPAs), combined two-cycle city/highway test. The Tesla Roadster has a range that is almost double that of any other commercially released electric vehicle and reportedly set a new world distance record of 313 miles on a single charge for a production electric car in a rally across Australia as part of the 2009 Global Green Challenge. As of December 31, 2011, we had delivered approximately 2,150 Tesla Roadsters to customers in over 31 countries, almost all of which were sold in North America and Europe. We concluded the production run of the Tesla Roadster in January 2012. We are selling our remaining Tesla Roadsters primarily in Europe and Asia during 2012 until our inventory is depleted. To date, our customers have driven the Tesla Roadster for an estimated aggregate of almost 20 million miles.
We announced our second electric vehicle, Model S, with the public exhibition of a drivable early prototype in March 2009. In October 2011 we invited over three thousand customers and other stakeholders to see and ride in the beta prototypes of Model S at our manufacturing facility in Fremont, California, the Tesla Factory. We have completed the construction of several drivable Model S alpha and beta prototypes, which are currently undergoing detailed testing. We currently plan to begin customer deliveries of Model S by July 2012.
Model S is a four door, five-passenger premium sedan that offers exceptional performance, functionality and attractive styling. As a fully electric vehicle, Model S will produce zero tailpipe emissions while accelerating from zero to 60 miles per hour in a targeted time of as low as 4.4 seconds in its performance version. The base Model S will have an effective base price of $49,900 in the United States with the 40 kilowatt-hour (kWh) battery pack option, assuming and after giving effect to the continuation of a United States federal tax credit of $7,500 for the purchase of alternative fuel vehicles. Even without the tax credit, we believe the base list price will be competitive from a pricing perspective with other premium vehicles. We believe that Model S will demonstrate our ability to produce increasingly affordable electric vehicles that offer long-range capabilities and uncompromised performance, energy efficiency, convenience and design.
We plan to offer Model S with a variety of battery pack options40 kWh, 60 kWh and 85 kWhwhich we estimate will offer a range on a single charge of 160 miles, 230 miles, and 300 miles, respectively, while traveling at a steady speed of 55 miles per hour. The EPAs new fuel economy requirements will require us to label Model S utilizing new and different energy efficiency testing methodologies. These methodologies differ from the one we have used to estimate the range of the vehicles at a steady speed of 55 miles per hour and could reduce the range reported on the required labeling of our vehicles by up to 30% as compared to our current estimates.
We are designing Model S for a significantly broader customer base than the Tesla Roadster. Accordingly, we currently intend to target an annual production rate of approximately 20,000 cars per year beginning in 2013 from our Tesla Factory. We currently plan to commence deliveries by July 2012 and to deliver approximately 5,000 Model S sedans in 2012. As of December 31, 2011, we had received over 8,000 customer reservations with a minimum refundable payment of $5,000.
We have nearly completed the Tesla Factory, our integrated electric vehicle manufacturing facility in Fremont, California for the manufacture of Model S and its components. In October 2010, we completed the purchase of this facility from New United Motor Manufacturing, Inc. (NUMMI). We intend to use the facility for the production of our Model S vehicle, Model X crossover, and to build our future electric vehicles. We have entered into a loan agreement with the United States Federal Financing Bank and United States Department of Energy (DOE Loan Facility), to arrange loans for up to $465.0 million, $363.9 million of which is intended for the continued development of Model S and the build out of the Tesla Factory.
The electric powertrain we developed for the Tesla Roadster has provided the foundational technology for our Model S, our Model X crossover and our future vehicles, and for electric powertrain components and systems
5
that we are selling to Daimler and its affiliates and that we intend to sell to Toyota. Our electric powertrain consists of the following components: our modular battery pack, our power electronics, gearbox, our motor and control and integration software which enables the components to operate as a system. We sell certain of these components to Daimler and intend to sell these systems to Toyota, and have secured $101.2 million of an aggregate $465.0 million from our DOE Loan Facility to fund the infrastructure for these powertrain activities. We believe that our efforts in our powertrain development will enable us to advance our technology and rapidly and cost effectively develop vehicles.
Our battery pack and electric powertrain system has enabled us to deliver market-leading range capability on our vehicles at what we believe is a compelling battery cost per kilowatt-hour. The battery pack of the Tesla Roadster uses commercially available lithium-ion battery cells and contains 53 kilowatt-hours of usable energy, almost double the energy of any other commercially available electric vehicle battery pack, thereby significantly increasing its range capability. Designing an electric powertrain and a vehicle to exploit its energy efficiency has required extensive safety testing and innovation in battery packs, motors, powertrain systems and vehicle engineering. Our proprietary technology includes cooling systems, safety systems, charge balancing systems, battery engineering for vibration and environmental durability, customized motor design and the software and electronics management systems necessary to manage battery and vehicle performance under demanding real-life driving conditions. These technology innovations have resulted in an extensive intellectual property portfolioas of December 31, 2011, we had 59 issued patents and more than 230 pending patent applications with the United States Patent and Trademark Office and internationally in a broad range of areas.
We are designing our vehicles to enable the cost effective development of our future vehicles. For example, we are designing a common platform architecture for Model S, which compactly positions the battery pack, motor and other elements of our powertrain within the frame of the vehicle. We believe this architecture will form the basis of several future vehicles, including our planned Model X crossover, and enable us to efficiently and cost effectively launch these new vehicle models in the future.
Our design and vehicle engineering capabilities, combined with the technical advancements of our powertrain system, have enabled us to design and develop zero tailpipe emission vehicles that we believe overcome the design, styling, and performance issues that we believe have historically limited broad consumer adoption of electric vehicles. As a result, we believe our Tesla Roadster customers enjoy, and Model S customers will enjoy, several benefits, including:
| Long Range and Recharging Flexibility. The range of the Tesla Roadster is almost double the range of any other commercially available electric vehicle. We are designing Model S to offer an even greater range option. In addition, the Tesla Roadster incorporates our proprietary on-board charging system, permitting recharging from almost any available electrical outlet, and we are designing certain battery pack versions of Model S to offer fast charging capability from our planned SuperCharger network. We believe the long-range and charging flexibility of our vehicles will help reduce consumer anxiety over range, alleviate the need for expensive, large-scale charging infrastructure, and differentiate our vehicles as compared to our competitors currently announced electric vehicle product offerings. |
| Energy Efficiency and Cost of Ownership. We believe our Tesla Roadster offers and our Model S will offer consumers an attractive cost of ownership when compared to similar internal combustion engine or hybrid electric vehicles. Using only a single electric powertrain enables us to create a lighter, more energy efficient vehicle that is mechanically simpler than currently available hybrid or internal combustion engine vehicles. We also expect our electric vehicles will have lower relative maintenance costs than hybrid, plug-in hybrid, or internal combustion engine vehicles due to fewer moving parts and the absence of certain components, including oil, oil filters, spark plugs and engine valves. Additionally, government incentives that are currently available can reduce the cost of ownership even further. |
6
| High-Performance Without Compromised Design or Functionality. We believe we have been able to successfully overcome the design and performance tradeoff issues that encumbered most early electric vehicle designs. We believe the Tesla Roadster delivers an unparalleled driving experience with instantaneous and sustained acceleration through an extended range of speed. In addition, our Model S is being designed to seat five adults, provide best in class storage in the trunk and hood while offering design and performance comparable to, or better than, other premium sedans. |
Our Vehicles and Products
We currently design, manufacture and sell fully electric vehicles and electric powertrain components.
The Tesla Roadster
Our first vehicle, the Tesla Roadster, is the first high-performance electric sports car. The two-seat, convertible Tesla Roadster has a combination of range, style, performance and energy efficiency that we believe is unmatched in the market today. It can accelerate from zero to 60 miles per hour in 3.9 seconds and has a maximum speed of approximately 120 miles per hour. The Tesla Roadster also has a range of 245 miles on a single charge, as determined using the United States EPAs, combined two-cycle city/highway test. This range is almost double that of any other commercially released electric vehicle.
As of December 31, 2011, we had delivered approximately 2,150 Tesla Roadsters to customers in over 31 countries, almost all of which were sold to customers in North America and Europe. The Tesla Roadster complies with, or is exempt from, all applicable vehicle safety standards in the United States, the European Union as well as select other countries. To date, our customers have driven the Tesla Roadster for an estimated aggregate of almost 20 million miles. We concluded the production run of the Tesla Roadster in January 2012. We are selling our remaining Tesla Roadsters primarily in Europe and Asia during 2012 until our inventory is depleted.
The cumulative capital expenditures and research and development costs for the Tesla Roadster from our inception to the date we delivered our first Tesla Roadster was approximately $125 million.
We have continued to rapidly develop the Tesla Roadster since its introduction. In June 2009, nine months after its commercial introduction, we launched the Tesla Roadster 2, as well as a high-performance variant, the Tesla Roadster Sport. We delivered our first right-hand drive model of the Tesla Roadster in January 2010 and have since delivered right-hand drive Roadsters into key markets such as the United Kingdom, Japan, Hong Kong, and Australia. In July 2010, we released the Roadster 2.5, an upgraded version of Roadster 2.
Model S
Our second vehicle, Model S, is currently expected to begin customer deliveries by July of 2012 and we currently plan to deliver approximately 5,000 Model S sedans in 2012. We are leveraging technologies within the electric powertrain of the Tesla Roadster to create a four-door, five-adult-passenger sedan that produces zero tailpipe emissions while accelerating from zero to 60 miles per hour in a targeted time of as low as 4.4 seconds in its performance version. Model S acceleration from zero to 60 miles per hour is targeted at 6.5 seconds, 5.9 seconds and 5.6 seconds for the 40 kWh, 60 kWh and 85 kWh battery pack options, respectively. We have designed Model S to include a third row with two rear-facing child seats, subject to applicable safety regulations and requirements, allowing us to offer a seven passenger sedan. The drivable early prototype of Model S was exhibited to the public in March 2009 and as of December 31, 2011, we had received over 8,000 customer reservations with a minimum refundable payment of $5,000.
We plan to offer Model S with a variety of battery pack options40 kWh, 60 kWh and 85 kWhwhich we estimate will offer a range on a single charge of 160 miles, 230 miles, and 300 miles, respectively, while traveling at a steady speed of 55 miles per hour. We expect that these options will allow customers to purchase an electric vehicle that best matches their personal driving needs. The EPAs new fuel economy requirements
7
will require us to label Model S utilizing new and different energy efficiency testing methodologies. These methodologies differ from the one we have used to estimate the range of the vehicles at a steady speed of 55 miles per hour and could reduce the range reported on the required labeling of our vehicles by up to 30% as compared to our current estimates.
To complement its range capabilities, we also are offering Model S with a package of recharging options. We are offering the capability to fast charge Model S vehicles equipped with either the 60 kWh or 85 kWh battery packs at one of Teslas SuperCharger facilities, which we plan to start installing at selected locations in the United States in 2012. We anticipate that the fast charge capability will allow Model S owners to replenish 50% of the battery pack in about 30 minutes. This feature would offer these drivers a rapid and convenient way to recharge their vehicles. In addition, we are designing Model S to incorporate a modular battery pack in the floor of the vehicle, enabling it to be rapidly swapped out at a specialized commercial battery exchange facility that we anticipate may be available in the future.
We are designing Model S to offer a compelling combination of functionality, convenience and styling without compromising performance and energy efficiency. With the battery pack in the floor of the vehicle and the motor and gearbox in line with the rear axle, we have designed Model S to provide best in class storage space of 36.8 cubic feet, including storage under both the tailgate and the hood. By way of comparison, this storage space exceeds the approximately 14 cubic feet of storage available in the 2009 BMW 5 Series sedan and the approximately 21 cubic feet of storage available in the 2009 Lincoln Town Car. We are also planning to equip Model S with premium luxury features, including a 17 inch touch screen driver interface, advanced wireless connectivity, such as 3G connectivity, and driver customization of the infotainment and climate control systems of the vehicle. We are designing Model S with the intent to achieve a five star safety rating. We believe the intended combination of performance, styling, convenience and energy efficiency of Model S will help position it as a compelling alternative to other vehicles in the luxury and performance segments.
We have announced that the 45 kWh, 60 kWh and 85 kWh battery pack options of Model S will have an effective base price of $49,900, $59,900, and $69,900, respectively, in the United States, assuming and after giving effect to the continuation of a United States federal tax credit of $7,500 for the purchase of alternative fuel vehicles. Even without the tax credit, we believe the base list price will be competitive with other premium vehicles. We have also announced a performance version of Model S. Equipped with the 85 kWh battery pack and a high performance drive inverter, we anticipate that the Model S performance version will accelerate from zero to 60 miles per hour in 4.4 seconds. The effective base price of the Model S performance version is $84,900.
We anticipate that the initial units of Model S will be introduced with a Signature Series which will have an 85 kWh battery pack and include certain colors and interior options, some of which may not be available in the general production of Model S. We also offer the Signature Series with a performance version. The effective base price of the Signature Series is $87,900 and the effective base price of the Signature Series performance version is $97,900.
We are designing Model S to provide a lower cost of ownership as compared to other vehicles in its class. We consider the purchase price, cost of fuel and the cost of maintenance over a six year ownership period in this calculation. We assume comparable residual values, warranties, insurance costs and promotions and assume that currently available consumer incentives are still available at the time of a Model S purchase. In addition to the competitive pricing of Model S relative to other premium vehicles, we estimate that customers of electric vehicles will enjoy lower fuel costs. For example, assuming an average of 12,000 miles driven per year, an average electricity cost of 11.0 cents per kilowatt-hour and an average gasoline price of $3.38 per gallon over the full ownership of the vehicle which were the average electricity cost and gasoline price in the United States, respectively, for January 2012, and based on our estimate of the energy efficiency of Model S, we estimate that our Model S could have approximately $1,900 per year less in fuel costs than a comparable premium internal combustion engine sedan. Furthermore, we expect Model S will have lower maintenance costs than comparable premium internal combustion engine sedans due to fewer moving parts and the absence of certain components, including oil, oil filters, spark plugs and engine valves.
8
Model X and Future Vehicle Roadmap
We expect that Model S will be manufactured with an adaptable platform architecture and common electric powertrain so that we can use the platform of Model S to create future electric vehicle models. In particular, by designing our electric powertrain within the chassis to accommodate different vehicle body styles, we believe that we can save significant time in future vehicle development. In addition, we believe our strategy of using commercially available battery cells will enable us to leverage improvements in cell chemistries and rapidly introduce planned vehicles with different range options. However, we may make changes to the design of Model S, including changes that may make it more difficult to use the Model S platform for future vehicles.
In February 2012, we revealed an early prototype of the Model X crossover as the first vehicle we intend to develop by leveraging the Model S platform. This unique vehicle has been designed to fill the niche between the roominess of a minivan and the style of an SUV, while having high performance features such as a dual motor all-wheel drive system. We currently plan to start production of Model X in the fourth quarter of 2013 and ramp up to significant customer deliveries in early 2014. We anticipate that we will make Model X available with 60kWh and 85 kWh battery pack options, with pricing of each version similar to those of a comparably equipped Model S. We currently intend to target an annual production rate of approximately 10,000 -15,000 cars per year from our Tesla Factory.
We have also publicly announced our intent to develop a third generation electric vehicle to be produced at the Tesla Factory. We intend to offer this vehicle at a lower price point and expect to produce it at higher volumes than our Model S. We expect that this vehicle will be produced a few years after the introduction of the Model X crossover.
Powertrain Development and Sales
In addition to our own vehicles, we also design, develop, manufacture and sell advanced electric vehicle powertrain components.
In May 2009, we entered into a development agreement with Daimler under which we performed specified research and development services for the development of a battery pack and charger for Daimlers Smart fortwo electric drive. All development work related to the development agreement had been completed as of December 31, 2009. Through December 2011, we had sold over 2,100 battery packs and chargers for the Smart fortwo electric drive program.
In the first quarter of 2010, Daimler engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. A formal agreement for this arrangement was entered into with Daimler in May 2010. In October 2010, we completed the development of the A-Class battery pack and charger and began shipping production components for a demonstration fleet in February 2011. Through December 2011, we had sold over 500 battery packs and chargers for the A-Class EV program.
In the first quarter of 2010, we completed the development and sale of modular battery packs for electric delivery vans for Freightliner Custom Chassis Corporation (Freightliner), an affiliate of Daimler. Freightliner plans to use these electric vans in a limited number of customer trials.
In May 2010, we and Toyota announced our intention to cooperate on the development of electric vehicles, and for us to receive Toyotas support with sourcing parts and production and engineering expertise for Model S. In July 2010, we entered into an early phase agreement to develop an electric powertrain for the Toyota RAV4. With an aim by Toyota to market the electric vehicle in the United States in 2012, prototypes would be made by combining the Toyota RAV4 model with a Tesla electric powertrain. We began developing and delivering prototypes to Toyota for evaluation in September 2010. In October 2010, we entered into a contract services
9
agreement with Toyota for the development of a validated powertrain system, including a battery, power electronics module, motor, gearbox and associated software, which will be integrated into an electric vehicle version of the Toyota RAV4. Pursuant to our agreements, Toyota would pay us up to $69 million for the anticipated development services to be provided by us over the expected term of our performance. We expect to complete all of the development services for the RAV4 EV in the first quarter of 2012.
Additionally, in July 2011, we entered into an agreement to supply Toyota with an electric powertrain system for the RAV4 EV. We plan to begin delivery of these systems to Toyota for installation into the Toyota RAV4 EV in the first half of 2012. Our production activities under this program are expected to continue through 2014
In February 2012, we received an initial purchase order for the development of a full electric powertrain system for an additional Mercedes vehicle from Daimler. We are negotiating the agreement for production parts for this project; however, no agreement has yet been executed and there are no assurances that we will be able to enter into any such agreement.
We are continuing to develop our electric powertrain component and systems activities and have secured a $101.2 million loan under our DOE Loan Facility for the expansion of our engineering and production capability for these activities in our Palo Alto facility. This facility, which also serves as our corporate headquarters, houses our research and development services, including cell and component testing and prototyping, as well as manufacturing of powertrain components for sales to third parties.
Technology
We believe the core competencies of our company are powertrain and vehicle engineering. Our core intellectual property is contained within our electric powertrain. Our electric powertrain consists of the following: battery pack, power electronics, motor, gearbox and the control software which enables the components to operate as a system. We designed each of these major elements for our Tesla Roadster and plan to use much of this technology in Model S, Model X, our future electric vehicles and powertrain components that we build for other manufacturers. Our powertrain and battery pack have a modular design, enabling future generations of electric vehicles to incorporate a significant amount of this technology. Further, our powertrain is very compact and contains far fewer moving parts than the internal combustion powertrain. These features enable us to adapt it for a variety of applications, including our future vehicles and any powertrain components we build for other manufacturers.
Battery Pack
We design our battery packs to safely store significant amounts of energy and to have long lives. For example, we have designed our Tesla Roadster battery packs to store 53 kilowatt hours of useful energy and to have a life of over 100,000 miles or seven years. In addition, we have designed our battery packs to be modular so that we can leverage technology developments across our different vehicles and products. Our proprietary technology includes cooling systems, safety systems, charge balancing systems, battery engineering for vibration and environmental durability, robotic manufacturing processes, customized motor design and the software and electronics management systems necessary to manage battery and vehicle performance under demanding real-life driving conditions. We have significant experience and expertise in the safety and management systems needed to work with lithium-ion cells in the demanding automotive environment. We believe these advancements have enabled us to produce a battery pack at a low cost per kilowatt-hour.
We believe one of our core competencies is the design of our complete battery pack system. We have designed our battery pack system to permit flexibility with respect to battery cell chemistry, form factor and vendor that we adopt for battery cell supply. In so doing, we believe that we can leverage the substantial battery cell investments and advancements being made globally by battery cell manufacturers to continue to improve the
10
cost per kilowatt-hour of our battery pack. We maintain an internal battery cell testing lab and an extensive performance database of the many available lithium-ion cell vendors and chemistry types. We intend to incorporate the battery cells that provide the best value and performance possible into our battery packs, and we expect this to continue over time as battery cells continue to improve in energy storage capacity, longevity, power delivery and cost. We believe this flexibility will enable us to continue to evaluate new battery cells as they become commercially viable, and thereby optimize battery pack system performance and cost for our current and future vehicles. We believe our ability to change battery cell chemistries and vendors while retaining our existing investments in software, electronics, testing and vehicle packaging, will enable us to quickly deploy various battery cells into our products and leverage the latest advancements in battery cell technology.
The range of our electric vehicles on a single charge declines principally as a function of usage, time and charging patterns. A customers use of their Tesla vehicle as well as the frequency with which they charge the battery of their Tesla vehicle can result in additional deterioration of the batterys ability to hold a charge. For example, we currently expect that the Tesla Roadster battery pack will retain approximately 60-65% of its ability to hold its initial charge after approximately 100,000 miles or seven years, which will result in a decrease to the vehicles initial range. In addition, based on internal testing, we estimate that our Tesla Roadster would have a 5-10% reduction in range when operated in -20°C temperatures.
To date, we have tested hundreds of battery cells of different chemistries, form factors and designs. Based on this evaluation, we are presently using lithium-ion battery cells based on the 18650 form factor in all of our battery packs. These battery cells are commercially available in large quantities. We currently intend to use the same battery cell form factor in Model S and Model X. We recently entered into a supply agreement with Panasonic Corporation (Panasonic) for the use of Panasonics battery cells in Model S. We expect these battery cells to exhibit better performance and longer lifetimes than the battery cells used in the Tesla Roadster.
Power Electronics
The power electronics in our electric powertrain govern the flow of electrical current throughout the car, primarily the current that flows into and out of the battery pack. The power electronics has two primary functions, the control of torque generation in the motor while driving and the control of energy delivery back into the battery pack while charging.
The first function is accomplished through the drive inverter, which converts direct current (DC) from the battery pack into alternating current (AC) to drive our three-phase induction motors. The drive inverter also converts the AC generated by regenerative braking back into DC for electrical storage in the battery pack. The drive inverter performs this function by using a high-performance digital signal processor which runs some of the most complicated and detailed software in the vehicle. In so doing, the drive inverter is directly responsible for the performance, high efficiency and overall driving experience of the vehicle.
The second function, charging the battery pack, is accomplished by the charger, which converts alternating current (usually from a wall outlet or other electricity source) into direct current which can be accepted by the battery. The charger enables us to use any available source of power to charge our vehicle. Our vehicles can recharge on any electrical outlet from a common outlet of 15 amps and 120 volts all the way up to a high power outlet of 70 amps and 240 volts, which provides faster recharging.
Since the charger system is built into our vehicles, it is possible to charge our vehicles using a variety of power outlets. For example, charging the Tesla Roadster battery pack to full capacity will take approximately 7 hours using a 240 volt, 40 amp outlet that is widely available in many homes in the United States for electric appliances. A high power connection capable of 240 volts and 70 amps reduces this charging time to about 4.5 hours. Such a connection can be installed in many homes with the assistance of a qualified electrician. For additional flexibility, the Tesla Roadster battery pack can also be charged with a 120 volt, 15 amp connection.
11
Using this lower power output, the Tesla Roadster battery pack can be charged to full capacity in about 42 hours. This flexibility in charging provides customers with additional mobility, while also allowing them to conveniently charge the vehicle overnight at home.
We offer a high-voltage fast charge option for Model S with the 60 kWh and 85 kWh battery pack options that will enable the vehicle to charge from Teslas SuperCharger network that we anticipate may be available in the future.
Motor
Our powertrains currently use custom designed 3-phase induction motors. We believe we have made several important innovations in our motor design that minimize mass while still providing high power and efficiency. Our motors incorporate a proprietary fabricated copper rotor design. Our motors also include optimized winding patterns that allow for easy manufacture and fit in as much copper as possible to reduce resistance and energy losses.
Gearbox
We have designed custom, single speed gearboxes that are manufactured in-house for the Tesla Roadster and Model S. These gearboxes combine low mass with high efficiency and can match both the speed and torque capabilities of our AC induction motors. In comparison to a gasoline-powered vehicle, the elimination of gear changes contributes to the rapid acceleration characteristics of our vehicles.
Control Software
The performance and safety systems of our vehicles and their battery packs require sophisticated control software. There are numerous processors in our vehicles to control these functions, and we write custom firmware for many of these processors. The flow of electricity between the battery pack and the motor must be tightly controlled in order to deliver the performance and behavior expected in the vehicle. For example, software algorithms enable the vehicle to mimic the creep feeling which drivers expect from an internal combustion engine vehicle without having to apply pressure on the accelerator. Similar algorithms control traction, vehicle stability and the sustained acceleration and regenerative braking of the vehicle. Drivers use the information systems in our vehicles to optimize performance and charging modes and times. Software also is used extensively to monitor the charge state of each of the cells of the battery pack and to manage all of its safety systems. In addition to the vehicle control software, we are also developing software for the infotainment system of Model S.
Vehicle Design and Engineering
In addition to the design, development and production of the powertrain, we have created significant in-house capabilities in the design and engineering of electric vehicles and electric vehicle components and systems. We design and engineer bodies, chassis, interiors, heating and cooling and low voltage electrical systems in house and to a lesser extent in conjunction with our suppliers. Our team has core competencies in computer aided design and crash test simulations which we expect to reduce the product development time of new models.
Several traditional automotive subsystems required substantial redesign and custom optimization to integrate with the powertrain of an electric vehicle. For example, we redesigned the heating, ventilation and air conditioning (HVAC) system to integrate with the battery thermal management system and to operate without the energy generated from an internal combustion engine. In addition, low voltage electric systems which power features such as the radio, power windows, and heated seats also needed to be designed specifically for use in an electric vehicle. We have developed expertise in integrating these components with the high-voltage power source in the vehicle and in designing components that significantly reduce their load on the vehicle battery pack, thereby maximizing the available range of the vehicle.
12
Additionally, our team has expertise in lightweight materials, a very important characteristic for electric vehicles given the impact of mass on range. The Tesla Roadster is built with an internally-designed carbon fiber body which provides a balance of strength and mass. We intend to build Model S with a lightweight aluminum body and have been designing the body and chassis with a variety of materials and production methods that will help optimize the weight of the vehicle. We are developing an integrated electric vehicle manufacturing facility in Fremont, California, the Tesla Factory, to assemble vehicles and manufacture components that are critical to our intellectual property and quality of Model S. Our engineering and manufacturing teams are working alongside one another in an effort to accelerate the Model S development. We believe the co-location of our engineering and manufacturing teams will help accelerate the development of new products and allow for faster introduction of product changes.
Sales and Marketing
Company-Owned Sales
We market and sell cars directly to consumers. Until we opened our first store in Los Angeles, California in May 2008, all of our sales of the Tesla Roadster were conducted via the phone and internet, or in-person at our headquarters and corporate events. Increasingly, sales are being made through our network of Tesla stores. Our Tesla stores are highly visible, premium outlets in major metropolitan markets some of which combine retail sales and service. We intend to build separate sales and service locations in several markets. In April 2011, we opened our store at Santana Row in San Jose, California. The opening of our Santana Row store launched what we believe to be a new retail experience designed to engage and inform potential customers about electric vehicles in general and the advantages of the Tesla experience in particular. We have opened five other locations modeled on this concept to complement a network of 20 sales and service locations in North America, Europe and Asia. We plan to open additional stores and service centers during 2012, with a goal of establishing approximately 50 stores and additional service centers globally within the next several years in connection with our Model S rollout.
We believe that by owning our own sales and service network we can offer a compelling customer experience while achieving operating efficiencies and capturing sales and service revenues incumbent automobile manufacturers do not enjoy in the traditional franchised distribution and service model. Our customers deal directly with our own Tesla-employed sales and service staff, creating what we believe is a differentiated buying experience from the buying experience consumers have with franchised automobile dealers and service centers. We believe we will also be able to better control costs of inventory, manage warranty service and pricing, maintain and strengthen the Tesla brand, and obtain rapid customer feedback. Further, we believe that by owning our sales network we will avoid the conflict of interest in the traditional dealership structure inherent to most incumbent automobile manufacturers where the sale of warranty parts and repairs by a dealer are a key source of revenue and profit for the dealer but often are an expense for the vehicle manufacturer.
Reservations
We typically carry very limited inventory of our vehicles at our Tesla stores. While some customers purchase their vehicles from this inventory, most of our Tesla Roadster customers choose to customize the appearance of their vehicle. Potential customers who purchase Tesla Roadsters manufactured to specification are required to enter into a purchase agreement and pay a nonrefundable deposit, which is applied towards the purchase price of the vehicle. For vehicles purchased directly from our showrooms, no deposit is required. For our 2011 model year Tesla Roadsters manufactured to specification, our current purchase agreement requires the payment of an initial deposit, which varies based on the country of purchase. For Model S and Model X, we require an initial refundable reservation payment of at least $5,000. We require nonrefundable deposits for Tesla Roadsters manufactured to specification. We also occasionally accept refundable reservation payments if a customer is interested in purchasing a vehicle but not yet prepared to select the vehicle specifications. We currently require full payment of the purchase price of the vehicle only upon delivery of the vehicle to the
13
customer. Reservation payments and deposits are used by us to fund, in part, our working capital requirements and help us to align production with demand. For customers who have placed a refundable reservation payment with us, the reservation payment becomes a nonrefundable deposit once the customer has selected the vehicle specifications and enters into a purchase agreement.
As of December 31, 2011, we had received over 8,000 customer reservations for Model S. As of December 31, 2011, we held reservation payments for Model S sedans in an aggregate of $90.0 million and reservation payments for undelivered Tesla Roadsters in an aggregate of $1.8 million. All reservation payments for Model S are fully refundable until such time that a customer enters into a purchase agreement.
Leasing
We began offering a leasing alternative to customers of our Tesla Roadster in the United States and Canada in 2010 through wholly owned subsidiaries. Under this program, we have permitted qualifying customers in the United States to lease the Tesla Roadster for generally 36 months, after which time they have the option of either returning the vehicle to us or purchasing it for a predetermined residual value. We are using a third party provider to administer the back office services, including billing and collections, of the leases.
Marketing
Our principal marketing goals are to:
| generate demand for our vehicles and drive leads to our sales teams; |
| build long-term brand awareness and manage corporate reputation; |
| manage our existing customer base to create loyalty and customer referrals; and |
| enable customer input into the product development process. |
As the first company to commercially produce a federally-compliant, fully electric vehicle that achieves market-leading range on a single charge, we have been able to generate significant media coverage of our company and our vehicles, and we believe we will continue to do so. To date, media coverage and word of mouth have been the primary drivers of our sales leads and have helped us achieve sales without traditional advertising and at relatively low marketing costs. We also use traditional means of advertising including product placement in a variety of media outlets and pay-per-click advertisements on websites and applications relevant to our target demographics.
Our marketing efforts include events where our vehicles are displayed and demonstrated. These events range from widely attended public events, such as the Detroit, Los Angeles, and Frankfurt auto shows, to smaller events oriented towards sales, such as private drive events.
Company-Owned Charging Network, Service and Warranty
Tesla SuperCharger Network
During 2012, we plan to introduce a network of 90 kWh fast charging equipment, each called a Tesla SuperCharger, throughout North America for fast charging of Model S. The Tesla SuperCharger is an industrial grade, high speed charger designed to replenish 50% of the battery pack in about 30 minutes. Access to the SuperCharger network will be available to owners of Model S vehicles with the 60 kWh and 85 kWh battery pack options.
Service
Service of our electric vehicles takes place at most of our Tesla stores. Going forward, we intend to build separate sales and service locations in several markets. Within countries that are covered by our warranty agreement, we offer at home service through our mobile service technicians known as the Tesla Rangers. We
14
charge customers a fixed rate per mile for our Tesla Rangers technicians return trip from the location of the customers vehicle to the nearest Tesla store. For customers that are not covered by our warranty agreement, we offer at home service at a higher cost.
Tesla owners can upload data from their vehicle and send it to us on a memory card or via an on-board GSM system, allowing us to diagnose and remedy many problems before ever looking at the vehicle. When maintenance or service is required, a customer can schedule service by contacting one of our regional Tesla stores. Our Tesla Rangers can perform an array of procedures at a remote location, from annual inspections and firmware upgrades to full replacement of a power electronics module and other mechanical and electrical components. If service is more extensive and requires a vehicle lift, we can coordinate shipping of vehicles to and from the nearest Tesla store.
We believe that our company-owned service enables our technicians to work closely with our engineers and research and development teams in Silicon Valley to identify problems, find solutions, and incorporate improvements faster than incumbent automobile manufacturers.
New Vehicle Limited Warranty Policy
We provide a three year or 36,000 miles New Vehicle Limited Warranty with every Tesla Roadster, which we extended to four years or 50,000 miles for the purchasers of our 2008 Tesla Roadster. Customers have the opportunity to purchase an Extended Service Plan for the period after the end of the New Vehicle Limited Warranty to cover additional services for an additional three years or 36,000 miles, whichever comes first. The New Vehicle Limited Warranty is similar to other vehicle manufacturers warranty programs and is intended to cover all parts and labor to repair defects in material or workmanship in the body, chassis, suspension, interior, electronic systems, battery, powertrain and brake system. Exceptions to the New Vehicle Limited Warranty include wear items such as tires, brake pads and rotors, paint wear and tear, interior wear and tear and battery performance. We intend to announce our new vehicle limited warranty for Model S in 2012.
Battery Replacement Option
While battery failure due to defects in material or workmanship is included in the Tesla Roadster New Vehicle Limited Warranty, battery performance, specifically its ability to store electricity over time, is not covered in either the New Vehicle Limited Warranty or the Extended Service Plan. However, within three months of purchasing a vehicle, customers may purchase a one-time option to replace the battery pack at any time after the expiration of the New Vehicle Limited Warranty but before the tenth anniversary of the purchase date of the vehicle. For customers that select this option, we agree to replace the original battery pack of the vehicle with a replacement battery pack which will store at least 53 kilowatt-hours of usable energy. Charges in addition to the option purchase price apply if the customer exercises the battery pack replacement option prior to the seventh anniversary of the purchase date of the vehicle. The customer is entitled to a partial refund of the option purchase price if the option is not elected by the eighth anniversary of the purchase date of the vehicle.
Manufacturing
Vehicle Assembly
We completed the production of Tesla Roadster gliders at Lotus Cars Limited in January 2012. We have a limited inventory of Roadsters for sale primarily in Europe and Asia in 2012. As of December 31, 2011, we had delivered approximately 2,150 Roadsters to customers.
We have nearly completed the Tesla Factory, an integrated electric vehicle manufacturing facility in Fremont, California to manufacture components that are critical to our intellectual property and quality of Model S, including stamping, plastics, body assembly, paint operations, battery pack manufacturing, final vehicle assembly and end-of-line testing. Certain major component systems will be purchased from suppliers. We
15
currently intend to target an annual production rate at this facility for Model S of approximately 20,000 cars per year. We believe that we will be able to increase the annual production capacity of this plant beyond this amount through additional capital spending as well as by changing operating patterns and adding additional shifts.
Powertrain Component Manufacturing
In addition to developing our Model S and future vehicle manufacturing capabilities at the Tesla Factory, we are currently designing, developing and manufacturing lithium-ion battery packs, electric motors, gearboxes and components both for our vehicles and for our original equipment manufacturer customers. These activities occur at our electric powertrain manufacturing facility in Palo Alto, California and at the Tesla Factory.
Supply Chain
Model S uses over 2,000 purchased parts which we source globally from over 200 suppliers, many of whom are currently our single source suppliers for these components. We have developed close relationships with several key suppliers particularly in the procurement of cells and certain electric powertrain components. While we obtain components from multiple sources whenever possible, similar to other automobile manufacturers, many of the components used in our vehicles are purchased by us from a single source.
To date, we have not qualified alternative sources for most of the single sourced components used in our vehicles and we generally do not maintain long-term agreements with our suppliers. While we believe that we may be able to establish alternate supply relationships and can obtain or engineer replacement components for our single source components, we may be unable to do so in the short term or at all at prices or costs that are favorable to us. For example, while several sources of the battery cell we have selected for our battery packs are available, we have fully qualified only one supplier for these cells. Any disruption in the supply of battery cells from such vendor could temporarily disrupt production of the vehicles until such time as a different supplier is fully qualified and there can be no assurance that we would be able to successfully retain alternative suppliers on a timely basis. Moreover, battery cell manufactures may not supply us at reasonable prices or on reasonable terms or may choose to refuse to supply electric vehicle manufacturers to the extent they determine that the vehicles are not sufficiently safe.
We use various raw materials in our business including aluminum, steel, nickel and copper. The prices for these raw materials fluctuate depending on market conditions and global demand for these materials. We believe that we have adequate supplies or sources of availability of the raw materials necessary to meet our manufacturing and supply requirements. There are always risks and uncertainties, however, with respect to the supply of raw materials that could impact their availability in sufficient quantities or reasonable prices to meet our needs.
Quality Control
Our quality control efforts are divided between product quality and supplier quality, both of which are focused on designing and producing products and processes with high levels of reliability. Our product quality engineers work with our engineering team and our suppliers to help ensure that the product designs meet functional specifications and durability requirements. Our supplier quality engineers work with our suppliers to ensure that their processes and systems are capable of delivering the parts we need at the required quality level, on time, and on budget. Our quality systems engineers create and manage our systems, such as configuration management and corrective action systems, to help ensure product developers, supplier chain managers, and production controllers have the product information they need.
Customers and Selected Relationships
We currently sell our cars primarily to individual customers. We have strategic or commercial relationships with Daimler, Toyota, and Panasonic. We intend to expand our business by developing and selling additional powertrain components and systems to Daimler, Toyota and other third party OEMs, and have secured a $101.2 million loan under our DOE Loan Facility to fund the infrastructure these activities.
16
Daimler AG
Beginning in 2008, we commenced efforts on a powertrain development arrangement with Daimler. In May 2009, we entered into a development agreement with Daimler under which we have performed specified research and development services for the development of a battery pack and charger for Daimlers Smart fortwo electric drive. All development work related to the development agreement had been completed as of December 31, 2009. Through December 2011, we had sold over 2,100 battery packs and chargers for the Smart fortwo electric drive program. In the first quarter of 2010, Daimler engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. A formal agreement for this arrangement was entered into with Daimler in May 2010. In October 2010, we completed the development of the A-Class battery pack and charger and began shipping production parts in February 2011. Through December 2011, we sold over 500 battery packs and chargers for the A-Class EV program. In the first quarter of 2010, we completed the development and sale of modular battery packs for electric delivery vans for Freightliner, an affiliate of Daimler. Freightliner plans to use these electric vans in a limited number of customer trials.
In February 2012, we received an initial purchase order for the development of a full electric powertrain system for an additional Mercedes Benz vehicle from Daimler. We are negotiating the agreement for production parts for this project; however, no agreement has yet been executed and there are no assurances that we will be able to enter into any such agreement.
In addition to the agreements described above, we have entered into an exclusivity and intellectual property agreement (EIP Agreement) with Daimler North America Corporation (DNAC), an affiliate of Daimler, in which we agreed to begin negotiating in good faith to enter into further agreements within certain strategic cooperation areas, including technology collaboration in various electric powertrain areas, automotive engineering support, joint electric vehicle development efforts and access to component parts for Tesla designed products. Under this EIP Agreement, we agreed that, until November 11, 2009, we would not negotiate or enter into any agreements with other parties that would be competitive with the arrangements contemplated for these strategic cooperation areas, unless the results of such arrangement would be marketed solely under the Tesla brand. As of that date, we had not executed any further agreements with Daimler in the areas of strategic cooperation.
The EIP Agreement provides that ending July 2013, if the company receives an offer from a strategic competitor of Daimler to enter into an agreement for development of a non-Tesla branded vehicle or an integrated electric powertrain system, DNAC would be given the right of first refusal to enter into such agreement with the company instead of, and on the same terms offered by, the third party.
The EIP Agreement also provides that if we execute a strategic cooperation agreement with DNAC to jointly engineer an electric vehicle, then additional exclusivities would apply until July 2013, provided a minimum annual volume of sales is achieved. The EIP Agreement provides that none of the restrictions set out in that agreement, or in any strategic agreement, would limit us from developing technology with any third party for use in a Tesla-branded product or service or related to the Tesla Roadster or Model S, engaging in any transaction with a company that is not a Daimler competitor, or supplying components for electric powertrains that are designed by third parties.
The EIP Agreement also provides that if the parties enter into the strategic agreements or further agreements, those agreements will allocate intellectual property rights according to certain principles outlined in the EIP Agreement. In addition, until July 2013, before licensing intellectual property generated outside the scope of any strategic cooperation area to a Daimler competitor, we would first have to offer DNAC the right to license the intellectual property on a non-exclusive, royalty-bearing basis, or on an exclusive basis in the automotive field; and if DNAC requests the latter, we must negotiate such a license in good faith. If no agreement is reached, however, we would be free to license the technology to the Daimler competitor, and DNAC could take a non-exclusive license. Both we and Daimler have the right to terminate the EIP Agreement
17
in the event the other party undergoes, or executes an agreement to undergo, a change of control. Any strategic cooperation agreements entered into between us and Daimler prior to termination will not be affected by such termination.
To date, with the exception of the development agreement for the Smart fortwo electric drive and the agreement for the development and production of a battery pack and charger for a pilot fleet of Daimlers A-Class electric vehicles, the strategic agreements described in the EIP Agreement have not been entered into, and there can be no assurance that the parties will ever enter into such agreements. Even if we were to enter into such agreements, the parties may negotiate and agree to terms that are different to those set forth in the EIP Agreement and outlined above. Such different or new terms may be more or less favorable to us.
In addition to these agreements, Blackstar lnvestco LLC (Blackstar), an affiliate of Daimler, beneficially owned 8,113,215 shares of our common stock as of December 31, 2011. Blackstars representative, Dr. Herbert Kohler, serves as a member of our Board of Directors.
Toyota Motor Corporation
In May 2010, we and Toyota announced our intention to cooperate on the development of electric vehicles, and for us to receive Toyotas support with sourcing parts and production and engineering expertise for Model S. In July 2010, we entered into an early phase agreement to develop an electric powertrain for the Toyota RAV4. With an aim by Toyota to market the electric vehicle in the United States in 2012, prototypes would be made by combining the Toyota RAV4 model with a Tesla electric powertrain. We began developing and delivering prototypes to Toyota for evaluation in September 2010.
In October 2010, we entered into a contract services agreement with Toyota for the development of a validated powertrain system, including a battery, power electronics module, motor, gearbox and associated software, which will be integrated into an electric vehicle version of the Toyota RAV4. Pursuant to our agreements, Toyota will pay us up to $69 million for the anticipated development services to be provided by us over the expected term of our performance. We expect to complete all of the development services for the RAV4 EV in the first quarter of 2012.
Additionally, in July 2011, we entered into an agreement to supply Toyota with electric powertrain system for the RAV4 EV. We plan to begin delivery of these systems to Toyota for installation into the Toyota RAV4 EV in the first half of 2012. Our production activities under this program are expected to continue through 2014.
In addition to these agreements, in July 2010, we sold 2,941,176 shares of our common stock to Toyota at our IPO price of $17.00 per share.
Panasonic
Panasonic is a supplier of battery cells for our battery packs. In January 2010, we announced that we were collaborating with Panasonic on the development of next-generation electric vehicle cells based on the 18650 form factor and nickel-based lithium ion chemistry. In October 2011, we finalized a supply agreement for these battery cells. The agreement supplies us with battery cells to build more than 80,000 vehicles over the next four years.
In November 2010, we sold 1,418,573 shares of our common stock to an entity affiliated with Panasonic Corporation at a price of $21.15 per share, which was the average of the trading highs and lows of our common stock from October 25 to October 29, 2010.
18
Governmental Programs, Incentives and Regulations
United States Department of Energy Loans
On January 20, 2010, we entered into a loan facility with the Federal Financing Bank (FFB) and the United States Department of Energy (DOE), under the DOEs Advanced Technology Vehicles Manufacturing Loan Program, as set forth in Section 136 of the Energy Independence and Security Act of 2007 (ATVM Program). We refer to such loan facility, including amendments thereto, as the DOE Loan Facility. Under the DOE Loan Facility, FFB has made available to us two multi-draw term loan facilities in an aggregate principal amount of up to $465.0 million and the DOE has agreed to reimburse FFB for any liabilities, losses, costs or expenses incurred by FFB with respect to the term loan facilities. Up to an aggregate principal amount of $101.2 million will be made available under the first term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the powertrain engineering and the build-out of a facility to design and manufacture lithium-ion battery packs, electric motors and electric components (the Powertrain Facility). Up to an aggregate principal amount of $363.9 million will be made available under the second term loan facility to finance up to 80% of the costs eligible for funding under the ATVM Program for the development of, and to build out the manufacturing facility for, our Model S sedan (the Model S Facility). Under the DOE Loan Facility, we are responsible for the remaining 20% of the costs eligible for funding under the ATVM Program for the projects as well as any cost overruns for each project.
Through December 31, 2011, we have received draw downs under the DOE Loan Facility for an aggregate of $276.3 million, with interest rates ranging from 1.0% to 3.4%, for eligible project costs under both projects that we have incurred from December 15, 2008 through November 30, 2011. In February 2012, we received additional loans under the DOE Loan Facility for $14.4 million at interest rates ranging from 0.9% to 1.4%.
In connection with the DOE Loan Facility, we have also issued the DOE a warrant to purchase up to 3,085,011 shares of our common stock at an exercise price of $7.54 per share and a warrant to purchase up to 5,100 shares of our common stock at an exercise price of $8.94 per share. Beginning on December 15, 2018 and until December 14, 2022, the shares subject to purchase under these warrants will become exercisable in quarterly amounts depending on the average outstanding balance of the loan during the prior quarter. These warrants may be exercised until December 15, 2023. If we prepay the DOE Loan Facility in full prior to December 15, 2018, no shares will be exercisable under these warrants, except in the case of an event of default, which could accelerate the vesting.
For more information on the DOE Loan Facility, see Note 9 to our Consolidated Financial Statements included in this Annual Report on Form 10-K under Item 8. Financial Statements and Supplementary Data.
California Alternative Energy and Advanced Transportation Financing Authority Tax Incentives
In December 2009, we finalized an arrangement with the California Alternative Energy and Advanced Transportation Financing Authority (CAEATFA) that will result in an exemption from California state sales and use taxes for up to $320 million of manufacturing equipment. To the extent all of this equipment is purchased and would otherwise be subject to California state sales and use tax, we believe this incentive would result in tax savings by us of up to approximately $31 million over a three year period starting in December 2009. The equipment purchases may be used only for three purposes: (i) to establish our production facility for Model S in California, (ii) to upgrade our Palo Alto powertrain production facility, and (iii) to expand our current Tesla Roadster assembly operations at our Menlo Park facility. As of December 31, 2011, we have received the tax exemption for approximately $97.9 million in qualifying purchases.
In January 2012, we finalized an additional agreement with CAEATFA that will result in an exemption from California state sales and use taxes for up to $292 million of manufacturing equipment. To the extent all of this equipment is purchased and would otherwise be subject to California state sales and use tax, we believe this
19
incentive would result in tax savings by us of up to approximately $24 million over a three year period starting in December 2011. The equipment purchases may be used only for two purposes: (i) to develop the Model X crossover vehicle and its production capacity in California and, (ii) to further upgrade our powertrain production facilities in California. As of January 31, 2012, we had not begun to submit qualifying equipment for this exemption.
California Air Resources Boards Zero Emissions Vehicle Program
In connection with the delivery and placement into service of our zero emission vehicles in a number of states, we have earned and will continue to earn tradable credits that can be sold. Under Californias Low-Emission Vehicle Regulations, and similar laws in other states, vehicle manufacturers are required to ensure that a portion of the vehicles delivered for sale in that state during each model year are zero emission vehicles. Currently, the states of Arizona, California, Connecticut, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York, Oregon, Rhode Island and Vermont have such laws in effect. These laws provide that a manufacturer of zero emission vehicles may earn credits, referred to as ZEV credits, and may sell excess credits to other manufacturers who apply such credits to comply with these regulatory requirements. As a manufacturer solely of zero emission vehicles, we earn ZEV credits on each vehicle sold in such states and have entered into agreements with other automobile manufacturers to sell the ZEV credits that we earn. Recently, California passed amendments to the ZEV mandate that would require all large volume manufacturers (those manufacturers selling 20,000 or more vehicles in California) to increase the number of zero emission vehicles sold. Under the new requirements, by 2025 up to 15.4% of each large volume manufacturers fleet must be made of zero emission vehicles.
We have entered into three contracts for the sale of ZEV credits with three separate automotive manufacturers. For the years ended December 31, 2011, 2010 and 2009, we earned revenue from the sale of ZEV credits of $2.7 million, $2.8 million and $8.2 million, respectively. Our current agreement with an automotive manufacturer provides for the sale of a partial quantity of the ZEV credits that we earn from the sale of vehicles that we manufacture in 2012, with an option for additional sales of uncommitted credits in future model years. We have also entered into a third contract with another automotive manufacturer to sell ZEV credits earned from the sale of Model S vehicles in 2012. To the extent we have additional ZEV credits available for sale, we may enter into new agreements with automotive manufacturers to sell such credits.
RegulationVehicle Safety and Testing
Our vehicles are subject to, and the Tesla Roadster complies with, or is exempt from, numerous regulatory requirements established by the National Highway Traffic Safety Administration (NHTSA), including all applicable United States federal motor vehicle safety standards (FMVSS). As a manufacturer, we must self-certify that a vehicle meets or otherwise obtain an exemption from all applicable FMVSSs, as well as the NHTSA bumper standard, before the vehicle can be imported into or sold in the United States. There are numerous FMVSSs that apply to our vehicles. Examples of these requirements include:
| Crash-worthiness requirementsincluding applicable and appropriate level of vehicle structure and occupant protection in frontal, side and interior impacts including through use of equipment such as seat belts and airbags which must satisfy applicable requirements; |
| Crash avoidance requirementsincluding appropriate steering, braking and equipment requirements, such as, headlamps, tail lamps, and other required lamps, all of which must conform to various photometric and performance requirements; |
| Electric vehicle requirementslimitations on electrolyte spillage, battery retention, and avoidance of electric shock following specified crash tests; |
20
| Windshield defrosting and defoggingdefined zones of the windshield must be cleared within a specified timeframe; and |
| Rearview mirror requirementsrearward areas that must be visible to the driver via the mirrors. |
As a small volume manufacturer that produces only electric vehicles, we have applied for, and have been granted, exemptions from certain advanced air bag and electronic stability control requirements, which apply to Tesla Roadsters manufactured through November 7, 2011. Under U.S. law, we are required to certify compliance with, or obtain exemption from all applicable federal motor vehicle safety standards and we have done so with respect to each vehicle we have offered for sale in the United States. Based on testing, engineering analysis, and other information, we have certified that the Tesla Roadster complies with, or is exempt from all applicable NHTSA standards by affixing a certification label to each Tesla Roadster sold.
We are also required to comply with other requirements of federal laws administered by NHTSA, including the Corporate Average Fuel Economy standards, consumer information labeling requirements, early warning reporting requirements regarding warranty claims, field reports, death and injury reports and foreign recalls, and owners manual requirements.
Our vehicles sold in Europe are subject to European Union safety testing regulations. Many of those regulations, referred to as European Union Whole Vehicle Type Approval (WVTA), are different from the federal motor vehicle safety standards applicable in the United States and may require redesign and/or retesting. Our Tesla Roadsters are currently approved for sale on a limited basis in the European Union via the Small Series WVTA, which permits the manufacture and sale in the European Union of no more than 1,000 vehicles per year. Since we have fewer than 1,000 Tesla Roadsters left to sell, we have no plans to commence testing our Tesla Roadsters for the WVTA to assure compliance with the European Union requirements to permit unlimited sales. Similarly, Australia and Japan have additional testing regulations applicable to high volume manufacturers. We also plan to keep Australian and Japanese sales of our Tesla Roadsters at a low volume, and have no plans to comply with the Australian and Japanese requirements to permit high volume sales in these jurisdictions. In connection with the introduction of the Tesla Roadster in Australia and Japan, we conducted a frontal impact test based on European Union testing standards on the Tesla Roadster in November 2009, which is required for sales exceeding certain annual volumes outside the United States. While the Tesla Roadster met most of the criteria for occupant protection and all criteria for high voltage safety in the front impact crash test, there were two criteria that were not met in the test. Based on our analysis of additional compliance options in Australia and Japan, we believe such an outcome should not limit our ability to sell the Tesla Roadster in Australia below certain annual volumes or, subject to compliance with certain Japanese import rules, have a material impact on our ability to sell Tesla Roadsters in Japan.
The Federal Trade Commission (FTC) requires us to calculate and display the range of our electric vehicles on a label we affix to the vehicles window. The FTC specifies that we follow testing requirements set forth by the Society of Automotive Engineers (SAE) which further requires that we test using the United States EPAs combined city and highway testing cycles. In July 2011, the EPA announced new energy efficiency testing methodologies for electric vehicles. These new requirements, when applied to our vehicles, could reduce the advertised range of our vehicles by up to 30% as compared to methodologies we have used to estimate the range of the vehicles at a steady speed of 55 miles per hour. Shortly after the EPA issued their new requirements, the FTC issued a proposed rule that would harmonize current FTC label requirements with the EPAs new fuel economy label requirements. If finalized, changes to the testing cycles previously utilized could impair our ability to deliver Model S with the previously advertised range based on the steady speed of 55 miles per hour range methodology, which could result in the cancellation of a number of the over 8,000 reservations that have been placed for Model S as of December 31, 2011. Although the real life customer experience of the range of our electric vehicles will not change due to the changes in the FTC or EPA standards, the reduction in the advertised range could negatively impact our sales and harm our business.
21
The Automobile Information and Disclosure Act requires manufacturers of motor vehicles to disclose certain information regarding the manufacturers suggested retail price, optional equipment and pricing. In addition, the Act allows inclusion of city and highway fuel economy ratings, as determined by EPA, as well as crash test ratings as determined by NHTSA if such tests are conducted.
RegulationEPA Emissions & Certificate of Conformity
The Clean Air Act requires that we obtain a Certificate of Conformity issued by the EPA and a California Executive Order issued by the California Air Resources Board (CARB) with respect to emissions for our vehicles, including Model S. The Certificate of Conformity is required for vehicles sold in states covered by the Clean Air Acts standards and both the Certificate of Conformity and the Executive Order is required for vehicles sold in states that have sought and received a waiver from the EPA to utilize California standards. The California standards for emissions control for certain regulated pollutants for new vehicles and engines sold in California are set by CARB. States that have adopted the California standards as approved by EPA also recognize the Executive Order for sales of vehicles.
RegulationBattery Safety and Testing
Our battery pack conforms with mandatory regulations that govern transport of dangerous goods that may present a risk in transportation, which includes lithium-ion batteries. The governing regulations, which are issued by the Pipeline and Hazardous Materials Safety Administration (PHMSA) are based on the UN Recommendations on the Safe Transport of Dangerous Goods Model Regulations, and related UN Manual Tests and Criteria. The regulations vary by mode of transportation when these items are shipped such as by ocean vessel, rail, truck, or by air.
We have completed the applicable transportation tests for our prototype and production battery packs demonstrating our compliance with the UN Manual of Tests and Criteria, including:
| Altitude simulationsimulating air transport; |
| Thermal cyclingassessing cell and battery seal integrity; |
| Vibrationsimulating vibration during transport; |
| Shocksimulating possible impacts during transport; and |
| External short circuitsimulating an external short circuit. |
We also subject our battery packs to the appropriate tests specified in the Society of Automotive Engineers (SAE) J2464 and J2929 which include further tests such as immersion, humidity, and exposure to fire.
We use lithium metal oxide cells in our battery packs. The cells do not contain any lead, mercury, cadmium, or other hazardous materials, heavy metals, or any toxic materials. Our battery packs include certain packaging materials which contain trace amounts of various hazardous chemicals whose use, storage and disposal is regulated under federal law. We currently have an agreement with a third party battery recycling company to recycle our battery packs. If a customer wishes to dispose of a battery pack from one of our vehicles, we anticipate accepting the depleted battery from the customer without any additional charge.
Automobile Manufacturer and Dealer Regulation
State law regulates the manufacture, distribution and sale of automobiles, and generally requires motor vehicle manufacturers and dealers to be licensed. To the extent possible, we plan to secure dealer licenses (or the equivalent of a dealer license) and engage in activities as a motor vehicle dealer in so far as we are permitted to do so as we open additional Tesla stores. Some states do not permit automobile manufacturers to be licensed as
22
dealers or to act in the capacity of a dealer. To sell vehicles to residents of states where we are not licensed as a dealer, to the extent permitted by local law, both the actual sale and all activities related to the sale would generally have to occur out of state. In this scenario, it is possible that activities related to marketing, advertising, taking orders, taking reservations and reservation payments, and delivering vehicles could be viewed by a state as conducting unlicensed activities in the state or otherwise violating the states motor vehicle industry laws. Regulators in these states may require us to hold and meet the requirements of appropriate dealer or other licenses and, in states in which manufacturers are prohibited from acting as dealers, may otherwise prohibit or impact our planned activities.
In jurisdictions where we do not have a Tesla store, a customer may try to purchase our vehicles over the internet. However, some states, such as Kansas, have laws providing that a manufacturer cannot deliver a vehicle to a resident of such state except through a dealer licensed to do business in that state which may be interpreted to require us to open a store in the state of Kansas in order to sell vehicles to Kansas residents. Such laws may be interpreted to require us to open a store in such state before we sell vehicles to residents of such states. In some states where we have opened a viewing gallery that is not a full retail location, it is possible that a state regulator could take the position that activities at our gallery constitute an unlicensed motor vehicle dealership and thereby violates applicable manufacturer-dealer laws. Although we would prefer that a state regulator address any concerns by discussing such concerns with us and requesting voluntary compliance, a state could also take action against us, including levying fines or requiring that we refrain from certain activities. In addition, some states have requirements that service facilities be available with respect to vehicles sold in the state, which may be interpreted to also require that service facilities be available with respect to vehicles sold over the internet to residents of the state thereby limiting our ability to sell vehicles in states where we do not maintain service facilities.
The foregoing examples of state laws governing the sale of motor vehicles are just some of the regulations we will face as we sell our vehicles. In many states, the application of state motor vehicle laws to our specific sales model is largely without precedent, particularly with respect to sales over the internet, and would be determined by a fact specific analysis of numerous factors, including whether we have a physical presence or employees in the applicable state, whether we advertise or conduct other activities in the applicable state, how the sale transaction is structured, the volume of sales into the state, and whether the state in question prohibits manufacturers from acting as dealers. As a result of the fact specific and untested nature of these issues, and the fact that applying these laws intended for the traditional automobile distribution model to our sales model allows for some interpretation and discretion by the regulators, state legal prohibitions may prevent us from selling to consumers in such state.
California laws, and potentially the laws of other states, restrict the ability of licensed dealers to advertise or take deposits for vehicles before they are available. In November 2007, we became aware that the New Motor Vehicle Board of the California Department of Transportation has considered whether our reservation and advertising policies comply with these laws. To date, we have not received any communications on this topic from the New Motor Vehicle Board or the Department of Motor Vehicles (DMV) which has the power to enforce these laws. There can be no assurance that the DMV will not take the position that our vehicle reservation or advertising practices violate the law. We expect that if the DMV determines that we may have violated the law, it would initially discuss its concerns with us and request voluntary compliance. If we are ultimately found to be in violation of California law, we might be precluded from taking reservation payments, and the DMV could take other actions against us, including levying fines and requiring us to refund reservation payments. Resolution of any inquiry may also involve restructuring certain aspects of the reservation program. The DMV also has the power to suspend licenses to manufacture and sell vehicles in California, following a hearing on the merits, which it has typically exercised only in cases of significant or repeat violations and/or a refusal to comply with DMV directions.
Certain states may have specific laws which apply to dealers, or manufacturers selling directly to consumers, or both. For example, the state of Washington requires that reservation payments or other payment
23
received from residents in the state of Washington must be placed in a segregated account until delivery of the vehicle, which account must be unencumbered by any liens from creditors of the dealer and may not be used by the dealer. Consequently, we established a segregated account for reservation payments in the state of Washington in January 2010. There can be no assurance that other state or foreign jurisdictions will not require similar segregation of reservation payment received from customers. Our inability to access these funds for working capital purposes could harm our liquidity.
Furthermore, while we have performed an analysis of the principal laws in the European Union relating to our distribution model and believe we comply with such laws, we have not performed a complete analysis in all foreign jurisdictions in which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered or laws we are unaware of in jurisdictions we have entered that may restrict our vehicle reservation practices or other business practices. Even for those jurisdictions we have analyzed, the laws in this area can be complex, difficult to interpret and may change over time.
In addition to licensing laws, specific laws and regulations in each of the states (and their interpretation by regulators) may limit or determine how we sell, market, advertise, and otherwise solicit sales, take orders, take reservations and reservation payments, deliver, and service vehicles for consumers and engage in other activities in that state. While we have performed an analysis of laws in certain jurisdictions in which we have Tesla stores, we have not performed a complete analysis in all jurisdictions in which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered that may restrict our vehicle reservation practices or other business practices.
Competition
Competition in the automotive industry is intense and evolving. We believe the impact of new regulatory requirements for occupant safety and vehicle emissions, technological advances in powertrain and consumer electronics components, and shifting customer needs and expectations are causing the industry to evolve in the direction of electric-based vehicles. We believe the primary competitive factors in our markets include but are not limited to:
| technological innovation; |
| product quality and safety; |
| service options; |
| product performance; |
| design and styling; |
| product price; and |
| manufacturing efficiency. |
We believe that our vehicles compete in the market both based on their traditional segment classification as well as based on their propulsion technology. Within the electric-based vehicle segment, there are three primary means of powertrain electrification which will differentiate various competitors in this market:
| Electric Vehicles are vehicles powered completely by a single on-board energy storage system (battery pack or fuel cell) which is refueled directly from an electricity source. Both the Tesla Roadster and Model S are examples of electric vehicles. |
| Plug-in Hybrid Vehicles are vehicles powered by both a battery pack with an electric motor and an internal combustion engine which can be refueled both with traditional petroleum fuels for the engine and electricity for the battery pack. The internal combustion engine can either work in parallel with the |
24
electric motor to power the wheels, such as in a parallel plug-in hybrid vehicle, or be used only to recharge the battery, such as in a series plug-in hybrid vehicle like the Chevrolet Volt. |
| Hybrid Electric Vehicles are vehicles powered by both a battery pack with an electric motor and an internal combustion engine but which can only be refueled with traditional petroleum fuels as the battery pack is charged via regenerative braking, such as used in a hybrid electric vehicle like the Toyota Prius. |
The worldwide automotive market, particularly for alternative fuel vehicles, is highly competitive today and we expect it will become even more so in the future. Prior to the introduction of the Nissan Leaf in December 2010, no mass produced performance highway-capable electric vehicles were being sold in the United States. In Japan, Mitsubishi has been selling its electric iMiEV since April 2010. We expect additional competitors to enter the United States and Europe within the next several years, and as they do so, we expect that we will experience significant competition. With respect to our Tesla Roadster, we currently face strong competition from established automobile manufacturers, including manufacturers of high-performance vehicles, such as Porsche and Ferrari. In addition, upon the launch of our Model S sedan, we will face competition from existing and future automobile manufacturers in the extremely competitive premium sedan market, including Audi, BMW, Lexus and Mercedes.
Many established and new automobile manufacturers have entered or have announced plans to enter the alternative fuel vehicle market. For example, Nissan introduced the Nissan Leaf, a fully electric vehicle in December 2010 and Ford has announced that it plans to introduce the pure electric Ford Focus and plug-in hybrid Ford C-Max in 2012. In addition, several manufacturers, including General Motors, Toyota, Ford, and Honda are each selling hybrid vehicles, and certain of these manufacturers have announced plug-in versions of their hybrid vehicles. For example, in December 2010, General Motors introduced the Chevrolet Volt, which is a plug-in hybrid vehicle that operates purely on electric power for a limited number of miles, at which time an internal combustion engine engages to recharge the battery.
Moreover, it has been reported that BMW, Daimler, Lexus, Audi, Renault and Volkswagen are also developing electric vehicles. Several new start-ups have also announced plans to enter the market for performance electric vehicles, although none of these have yet come to market. Finally, electric vehicles have already been brought to market in China and other foreign countries and we expect a number of those manufacturers to enter the United States market as well.
Most of our current and potential competitors have significantly greater financial, technical, manufacturing, marketing and other resources than we do and may be able to devote greater resources to the design, development, manufacturing, distribution, promotion, sale and support of their products. Virtually all of our competitors have more extensive customer bases and broader customer and industry relationships than we do. In addition, almost all of these companies have longer operating histories and greater name recognition than we do. Our competitors may be in a stronger position to respond quickly to new technologies and may be able to design, develop, market and sell their products more effectively. We believe our exclusive focus on electric vehicles and electric vehicle components, as well as our history of vehicle development and production, are the basis on which we can compete in the global automotive market in spite of the challenges posed by our competition; however, we have a limited history of operations.
Intellectual Property
Our success depends, at least in part, on our ability to protect our core technology and intellectual property. To accomplish this, we rely on a combination of patents, patent applications, trade secrets, including know-how, employee and third party nondisclosure agreements, copyright laws, trademarks, intellectual property licenses and other contractual rights to establish and protect our proprietary rights in our technology. As of December 31, 2011, we had 59 issued patents and more than 230 pending patent applications with the United States Patent and
25
Trademark Office and internationally in a broad range of areas. Our issued patents start expiring in 2026. We intend to continue to file additional patent applications with respect to our technology. We do not know whether any of our pending patent applications will result in the issuance of patents or whether the examination process will require us to narrow our claims. Even if granted, there can be no assurance that these pending patent applications will provide us with protection.
Seasonality
Sales of the Tesla Roadster have fluctuated on a seasonal basis with increased sales during the spring and summer months in our second and third fiscal quarters relative to our fourth and first fiscal quarters. We note that, in general, automotive sales tend to decline over the winter season and we anticipate that our sales of Model S, Model X and other electric vehicles we introduce in the future may have similar seasonality. However, our limited operating history makes it difficult for us to judge the exact nature or extent of the seasonality of our business. We do not expect our powertrain component sales and development services revenue to be impacted to a significant extent by seasonality.
Segment Information
We have determined that we operate as one reporting segment, which is the design, development, manufacturing and sales of electric vehicles and electric powertrain components. For information regarding financial data by geographic areas, see Note 13 to our Consolidated Financial Statements included in this Annual Report on Form 10-K under Item 8. Financial Statements and Supplementary Data.
Employees
As of December 31, 2011, we had 1,417 full-time employees consisting of 452 in manufacturing, 315 in powertrain research and development, 276 in sales, marketing and service, 216 in vehicle design and engineering, and 158 in general and administration. Of all of our employees, 1,088 are located in our Northern California offices (including the Tesla Factory), 81 are located at our Los Angeles facility and 48 are located at our United Kingdom offices. The other employees are located in our domestic sales and service centers and other international locations. None of our employees are currently represented by labor unions or are covered by a collective bargaining agreement with respect to their employment. To date, we have not experienced any work stoppages, and we consider our relationship with our employees to be good.
Available Information
We file or furnish periodic reports and amendments thereto, including our Annual Reports on Form 10-K, our Quarterly Reports on Form 10-Q and Current Reports on Form 8-K; proxy statements and other information with the Securities and Exchange Commission (SEC). Such reports, amendments, proxy statements and other information may be obtained by visiting the Public Reference Room of the SEC at 100 F Street, NE, Washington, D.C. 20549. Information on the operation of the Public Reference Room can be obtained by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains a website (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically. Our reports, amendments thereto, proxy statements and other information are also made available, free of charge, on our investor relations website at ir.teslamotors.com as soon as reasonably practicable after we electronically file or furnish such information with the SEC. The information posted on our website is not incorporated by reference into this Annual Report on Form 10-K.
26
ITEM 1A. | RISK FACTORS |
You should carefully consider the risks described below together with the other information set forth in this report, which could materially affect our business, financial condition and future results. The risks described below are not the only risks facing our company. Risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and operating results.
Risks Related to Our Business and Industry
Our limited operating history makes evaluating our business and future prospects difficult, and may increase the risk of your investment.
You must consider the risks and difficulties we face as an early stage company with a limited operating history. If we do not successfully address these risks, our business, prospects, operating results and financial condition will be materially and adversely harmed. We were formed in July 2003. We began delivering our first performance electric vehicle, the Tesla Roadster, in early 2008, and as of December 31, 2011, we had only sold approximately 2,150 Roadsters to customers, almost all of which were sold in the United States and Europe. Our revenues for the years ended December 31, 2011, 2010 and 2009 were $204.2 million, $116.7 million and $111.9 million, respectively. We have a very limited operating history on which investors can base an evaluation of our business, operating results and prospects.
To date, we have derived our revenues principally from sales of the Tesla Roadster and from electric powertrain development services and sales. We intend in the longer term to derive substantial revenues from the sales of our Model S sedan, our Model X crossover and future electric vehicles. Model S is in development and we plan to commence deliveries by July 2012. We have no operating history with respect to Model S and have not yet fully completed the component procurement process for Model S, which limits our ability to accurately forecast the cost of the vehicle. Further, we have only recently produced an early prototype of the Model X crossover. We plan to start Model X production in late 2013 and ramp to significant customer deliveries in early 2014. We only completed the purchase of our Tesla Factory in Fremont, California in October 2010 to produce such vehicles, and we have not yet completely finalized the full vehicle design or our engineering, manufacturing or component supply plans for Model S. In addition, our powertrain component sales, development services revenue and powertrain research and development compensation have been almost entirely generated under arrangements with Daimler AG (Daimler) and Toyota Motor Corporation (Toyota). While in November 2011 we received a letter of intent from Daimler for a full electric powertrain program for a vehicle in the Mercedes line and recently we received a purchase order to begin the development work, we have not yet finalized with Daimler the terms for this program and may never do so. Furthermore, while we have executed a supply and services agreement with Toyota related to the Toyota RAV4 EV program, there are no assurances that we will be able to secure future business with Daimler, Toyota or any of their affiliates.
It is difficult to predict our future revenues and appropriately budget for our expenses, and we have limited insight into trends that may emerge and affect our business. For example, during the years ended 2011, 2010 and 2009, we recorded quarterly revenues of as much as $58.2 million and as little as $18.6 million and quarterly operating losses of as much as $80.9 million and as little as $4.3 million. In the event that actual results differ from our estimates or we adjust our estimates in future periods, our operating results and financial position could be materially affected.
In addition, our revenues to date have included amounts we receive from selling zero emission vehicle (ZEV) credits to other automobile manufacturers, pursuant to certain state regulations. While we continue to sign agreements with automakers to sell ZEV and other regulatory credits, we may not be able to enter into new agreements to sell any additional credits related to Model S, Model X or our other future vehicles, which would negatively impact our revenues and margin targets in the long term.
27
Although we are significantly dependent upon revenue generated from the sale of the Tesla Roadster and our powertrain activities with other OEMs in the near term, our future success will be dependent upon our ability to design and achieve market acceptance of new vehicle models, specifically Model S and Model X.
We currently generate a significant percentage of our revenues from the sale of our Tesla Roadsters. We ended the production run of the Tesla Roadster at 2,500 vehicles in January 2012 and sales of new Tesla Roadsters are now limited to any vehicles available from our remaining inventory.
Our second planned vehicle, our Model S, will not be in production until mid-2012, requires significant investment prior to commercial introduction, and may never be successfully developed or commercially successful. Additionally, there can be no assurance that we will be able to design future electric vehicles that will meet the expectations of our customers or that our future models, including Model S and Model X, will become commercially viable. To the extent that we are not able to build the production Model S and Model X to the expectations created by the early prototypes and our announced specifications, customers may cancel their reservations, our future sales could be harmed and investors may lose confidence in us. Furthermore, historically, automobile customers have come to expect new and improved vehicle models to be introduced frequently. In order to meet these expectations, we may in the future be required to introduce on a regular basis new vehicle models as well as enhanced versions of existing vehicle models. As technologies change in the future for automobiles in general and performance electric vehicles specifically, we will be expected to upgrade or adapt our vehicles and introduce new models in order to continue to provide vehicles with the latest technology. To date, we have limited experience simultaneously designing, testing, manufacturing, upgrading, adapting and selling our electric vehicles.
We anticipate that we will experience a significant increase in losses and will experience a significant decrease in revenues prior to the launch of Model S.
Prior to the launch of our Model S, we anticipate our revenues will decline significantly as we have a limited supply of Tesla Roadsters remaining to be sold. As a result, we anticipate that we will generate limited revenues from selling electric vehicles in 2012 until the launch of our Model S. The launch of our Model S could be delayed for a number of reasons and any such delays may be significant and would extend the period in which we would generate limited revenues from sales of our electric vehicles. Furthermore, although we recently received a letter of intent and a purchase order from Daimler for a full electric powertrain program for a vehicle in the Mercedes line, we have not yet finalized with Daimler the terms for this program. In addition to the limited number of the Tesla Roadsters left for sale, we also expect powertrain component sales to be limited until the start of production for the Toyota RAV4 EV program during the first half of 2012. The potential decrease in sales revenue prior to the launch of Model S due to declines in both Roadster and powertrain component sales could materially and adversely affect our business, prospects, operating results and financial condition and our ability to fund operating losses could seriously constrain our growth.
Our production model for the non-powertrain portion of Model S is unproven, still evolving and is very different from the non-powertrain portion of the production model for the Tesla Roadster.
Our future business depends in large part on our ability to execute on our plans to develop, manufacture, market and sell our Model S. To date, our revenues have been principally derived from the sales of our Tesla Roadster. The Tesla Roadster has only been produced in low volume quantities and the body was assembled by Lotus Cars Limited (Lotus) in the United Kingdom, with the final assembly by us at our facility in Menlo Park, California for sales destined in the United States. We plan to manufacture Model S in higher volumes at our Tesla Factory. As a result, the non-powertrain portion of the production model for Model S will be substantially different and significantly more complex than the non-powertrain portion of the production model for the Tesla Roadster. In addition, for Model S we plan to introduce a number of new manufacturing technologies and techniques, such as aluminum spot welding systems, which have not been widely adopted in the automotive industry, and the vehicle will have a number of new and unique design features, such as a 17 inch display screen, newly designed retractable exterior door handles and a panoramic roof. Our Model S production model will
28
require significant investments of cash and management resources and we may experience unexpected delays or difficulties that could postpone our ability to launch or achieve full manufacturing capacity for Model S, which could have a material adverse effect on our business, prospects, operating results and financial condition.
Our production model for Model S is based on many key assumptions, which may turn out to be incorrect, including:
| that we will be able to complete changes to the late stage design of Model S in a timely manner that meets our targeted production date and allows for high quality manufacturing; |
| that we will be able to engage suppliers for all the necessary components on terms and conditions acceptable to us and that we will be able to obtain all components on a timely basis and in the necessary quantities, quality and at acceptable prices; |
| that we will not experience any significant delays or disruptions in our supply chain; |
| that our internal crash testing and computer aided design and engineering processes can accurately predict the performance of our vehicle for passing relevant safety standards and that we will be able to meet our safety goals without changing materials or designs in a way that would impact our anticipated start of production; |
| that we will be able to build out and equip the Tesla Factory in a timely manner, including meeting milestones and other conditions necessary to draw down funds under our loan facility with the United States Department of Energy (such loan facility, including amendments thereto, the DOE Loan Facility); |
| that we will be able to develop and equip the Tesla Factory without exceeding our projected costs and on our projected timeline; |
| that the equipment which we have purchased or which we select will be able to accurately manufacture the vehicle within specified design tolerances; |
| that we will be able to comply with environmental, workplace safety and similar regulations to operate our manufacturing facilities and our business on our projected timeline; |
| that Model S will obtain the necessary government approvals in a timely fashion without impacting our planned start of production; |
| that we will be able to attract, recruit, hire and train a sufficient number of skilled employees, including employees on the production line, to operate the Tesla Factory, and do so in a timely fashion; and |
| that we will be able to maintain high quality controls as we transition to a higher level of in-house manufacturing process. |
If one or more of the foregoing assumptions turns out to be incorrect, and we are unable to successfully launch Model S on time and on budget and to ramp to our planned volume production, our business prospects, operating results and financial condition may be materially and adversely impacted.
We have no experience to date in high volume manufacturing of our electric vehicles.
We do not know whether we will be able to develop efficient, automated, low-cost manufacturing capability and processes, and reliable sources of component supply that will enable us to meet the quality, price, engineering, design and production standards, as well as the production volumes required to successfully mass market Model S. Even if we are successful in developing our high volume manufacturing capability and processes and reliable sources of component supply, we do not know whether we will be able to do so in a manner that avoids significant delays and cost overruns, including as a result of factors beyond our control such as problems with suppliers and vendors, or in time to meet our vehicle commercialization schedules or to satisfy the requirements of customers. We have, and may in the future, experience cost increases from certain of our suppliers in order to meet our quality targets and development timelines as well as due to design changes that we
29
make. Any failure to develop such manufacturing processes and capabilities within our projected costs and timelines could have a material adverse effect on our business, prospects, operating results and financial condition.
We may experience significant delays in the design, manufacture, launch, financing and ramping up of production of Model S, which could harm our business and prospects.
Any delay in the financing, design, manufacture and launch of Model S could materially damage our brand, business, prospects, financial condition and operating results. Automobile manufacturers often experience delays in the design, manufacture and commercial release of new vehicle models. We experienced significant delays in launching the Tesla Roadster. We initially announced that we would begin delivering the Tesla Roadster in June 2007, but due to various design and production delays, we did not physically deliver our first Tesla Roadster until February 2008, and we only achieved higher production of this vehicle in the fourth quarter of 2008. These delays resulted in additional costs and adverse publicity for our business.
We may experience similar delays in launching and ramping up production of Model S, and any such delays could be significant. In addition, final designs for Model S and plans for the operation of the Tesla Factory using production tooling are still in process and have not yet been completely finalized. We continue to make final adjustments to the design of Model S to create the highest quality electric vehicle in the world. If we do not complete these late stage changes to the design of Model S however, and do not execute on Model S manufacturing plans in a timely manner, we may be unable to meet our plan to deliver first customer vehicles by July 2012 or ramp up our planned production of Model S in a timely manner, our costs may rise and/or Model S that we do produce initially or after ramp up may be lower in quality. Additionally, detailed testing of systems integration, performance and safety are ongoing and any negative results from such testing could cause production delays in Model S, cost increases or lower quality Model S vehicles.
In addition, we are currently evaluating, qualifying and selecting our remaining suppliers for the planned production of Model S. However, we may not be able to engage suppliers for the remaining components in a timely manner, at an acceptable price or in the necessary quantities. Furthermore, even if we are able to engage needed suppliers, such suppliers may not be ready or able to supply us with needed Model S components in a timely manner or may be unable to provide us with the necessary level of quality components that we require.
In addition, we will also need to do extensive testing to ensure that Model S is in compliance with applicable National Highway Traffic Safety Administration (NHTSA) safety regulations and United States Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission regulations prior to beginning mass production and delivery of the vehicles.
Our plan to begin production of Model S in mid-2012 is dependent upon the timely availability of funds from our DOE Loan Facility, upon our finalizing the related design, engineering, component procurement, testing, and manufacturing plans in a timely manner, and upon our ability to execute these plans within the current timeline.
We completed the purchase of the Tesla Factory in October 2010 and selected it in part because it was recently used for automobile manufacturing, was located within 20 miles of our Palo Alto engineering facility, and we believe its size may allow us to adapt our internal manufacturing plans quickly. We expect that all these factors will support the timely start of production for Model S. However, because we are still implementing our manufacturing plans, including the purchasing and installment of needed tooling, we may experience unexpected delays in ramping up production at this facility for the production of our Model S.
In January 2010, we entered into a loan facility with the Federal Financing Bank (FFB) that is guaranteed by the DOE (DOE Loan Facility). Our DOE Loan Facility provides for a $465.0 million loan facility under the DOEs Advanced Technology Vehicles Manufacturing Loan Program (ATVM Program) to help finance the continued development of Model S, including the build out and operation of a manufacturing facility, and to
30
finance the build out and operation of our electric powertrain manufacturing facility. We intend to fund the final tooling purchases and the remaining Model S related development expenses principally by using existing cash and cash obtained through the DOE Loan Facility. Our ability to draw down these funds under the DOE Loan Facility is conditioned upon certain draw conditions, including our achievement of progress milestones relating to the design and development of Model S as well as financial covenants. If we are unable to draw down the anticipated funds under the DOE Loan Facility on the timeline that we anticipate, our plans for building our Model S and electric powertrain manufacturing plants could be significantly delayed which would materially adversely affect our business, prospects, financial condition and operating results.
We are dependent on our suppliers, a significant number of which are single source suppliers, and the inability of these suppliers to continue to deliver, or their refusal to deliver, necessary components of our vehicles in a timely manner at prices, quality levels, and volumes acceptable to us would have a material adverse effect on our business, prospects and operating results.
Model S contains numerous purchased parts which we source globally from over 200 direct suppliers, many of whom are currently single source suppliers for these components. While we obtain components from multiple sources whenever possible, similar to other automobile manufacturers, many of the components used in our vehicles are purchased by us from a single source. While we are currently working to establish long-term agreements with our entire supplier base, to date we have not qualified alternative sources for most of the single sourced components used in our vehicles and we generally do not maintain long-term agreements with our suppliers.
While we believe that we may be able to establish alternate supply relationships and can obtain or engineer replacement components for our single source components, we may be unable to do so in the short term or at all at prices or costs that are favorable to us. In particular, while we believe that we will be able to secure alternate sources of supply for almost all of our single sourced components in a relatively short time frame, qualifying alternate suppliers or developing our own replacements for certain highly customized components of our vehicles may be time consuming, costly and may force us to make additional modifications to a vehicles design.
This supply chain exposes us to multiple potential sources of delivery failure or component shortages for Model S, as well as for our powertrain component sales activities. For example, earthquakes similar to the one that occurred in Japan in March 2011 could negatively impact our supply chain. We are currently evaluating, qualifying and selecting our suppliers for the planned production of Model S and we intend to establish dual suppliers and multiple manufacturing locations for some suppliers for several key components of Model S, although we expect that most of components for Model S will be single sourced. We have in the past experienced source disruptions in our supply chains, which have caused delays in our production process and we may experience additional delays in the future with respect to Model S and any other future vehicle we may produce.
Changes in business conditions, wars, governmental changes and other factors beyond our control or which we do not presently anticipate, could also affect our suppliers ability to deliver components to us on a timely basis. Furthermore, if we experience significant increased demand, or need to replace certain existing suppliers, there can be no assurance that additional supplies of component parts will be available when required on terms that are favorable to us, at all, or that any supplier would allocate sufficient supplies to us in order to meet our requirements or fill our orders in a timely manner. In the past, we have replaced certain suppliers because of their failure to provide components that met our quality control standards. The loss of any single or limited source supplier or the disruption in the supply of components from these suppliers could lead to delays in vehicle deliveries to our customers, which could hurt our relationships with our customers and also materially adversely affect our business, prospects and operating results.
Changes in our supply chain have resulted in the past, and may result in the future, in increased cost and delay. For example, a change in our supplier for our carbon fiber body panels contributed to the delay in our ability to ramp our production of the Tesla Roadster. A failure by our suppliers to provide the components in a timely manner or at the level of quality necessary to manufacture our performance electric vehicles such as our
31
Model S could prevent us from fulfilling customer orders in a timely fashion which could result in negative publicity, damage our brand and have a material adverse effect on our business, prospects, financial condition and operating results.
We face significant barriers in our attempt to produce our Model S, and if we cannot successfully overcome those barriers our business will be negatively impacted.
We face significant barriers as we attempt to produce our first mass produced vehicle, our Model S. We currently have drivable prototypes of Model S, but do not have a final design, or completely finalized manufacturing processes. The automobile industry has traditionally been characterized by significant barriers to entry, including large capital requirements, investment costs of designing and manufacturing vehicles, long lead times to bring vehicles to market from the concept and design stage, the need for specialized design and development expertise, regulatory requirements and establishing a brand name and image and the need to establish sales and service locations. As a manufacturer and seller of only electric vehicles, we face a variety of added challenges to entry that a traditional automobile manufacturer would not encounter including additional costs of developing and producing an electric powertrain that has comparable performance to a traditional gasoline engine in terms of range and power, inexperience with servicing electric vehicles, regulations associated with the transport of lithium-ion battery packs and unproven high-volume customer demand for fully electric vehicles. In addition, while we are designing Model S to have the capability to rapidly swap out its battery pack, there are no specialized public facilities today to perform such swapping. Also, while we expect to be able to achieve a 300 mile range while traveling at a speed of 55 miles per hour, our ability to do so will depend on the feasibility and availability of appropriate battery cell technologies and improvements that we are able to achieve in reducing energy consumption. We must successfully overcome these barriers as we move from producing the low volume Tesla Roadster to producing Model S at much higher volumes. If we are not able to overcome these barriers, our business, prospects, operating results and financial condition will be negatively impacted and our ability to grow our business will be harmed.
We may fail to meet our publicly announced guidance or other expectations about our business, which would cause our stock price to decline.
We provide guidance regarding our expected financial and business performance. Correctly identifying the key factors affecting business conditions and predicting future events is inherently an uncertain process. Our guidance is based in part on assumptions which include, but are not limited to, assumptions regarding our ability to achieve anticipated volumes and projected average sales prices for our Model S sedan, assumptions regarding supplier and commodity-related costs and assumptions regarding planned cost reductions. Such guidance may not always be accurate or may vary from actual results due to our inability to meet our assumptions and the impact on our financial performance that could occur as a result of the various risks and uncertainties to our business as set forth in these risk factors. We offer no assurance that such guidance will ultimately be accurate, and investors should treat any such guidance with appropriate caution. If we fail to meet our guidance or if we find it necessary to revise such guidance, investors and analysts may lose confidence in us and the market value of our common stock could be materially adversely affected.
Our vehicles make use of lithium-ion battery cells, which have been observed to catch fire or vent smoke and flame, and such events have raised concerns about the batteries used in automotive applications.
The battery pack in the Tesla Roadster makes use of lithium-ion cells. We also currently intend to make use of lithium-ion cells in the battery pack for Model S and any future vehicles we may produce. On rare occasions, lithium-ion cells can rapidly release the energy they contain by venting smoke and flames in a manner that can ignite nearby materials as well as other lithium-ion cells. Highly publicized incidents of laptop computers and cell phones bursting into flames have focused consumer attention on the safety of these cells. More recently, multiple Chevrolet Volt battery pack fires followed by a government investigation into the cause of such fires focused considerable public attention, as well as the attention of NHTSA, on the safety of electric vehicles. The events have raised concerns about the batteries used in automotive applications. To address these questions and
32
concerns, a number of cell manufacturers are pursuing alternative lithium-ion battery cell chemistries to improve safety. We have designed our battery pack to passively contain any single cells release of energy without spreading to neighboring cells and we are not aware of any such incident in our customers vehicles. We have tested the battery packs and subjected them to damaging treatments such as baking, overcharging, crushing or puncturing to assess our battery packs response to deliberate and sometimes destructive abuse. However, we have delivered only a limited number of Tesla Roadsters to customers and have limited field experience with our vehicles, especially Model S. Additionally, final safety testing for Model S, some versions of which use new, higher density cells in their battery packs, is currently in progress. Accordingly, there can be no assurance that a field failure of our Model S or other battery packs will not occur, which could damage the vehicle or lead to personal injury or death and may subject us to lawsuits. We may have to redesign our battery packs, which would be time consuming and expensive. In addition, negative public perceptions regarding the suitability of lithium-ion cells for automotive applications could seriously harm our business.
In addition, we store a significant number of lithium-ion cells at our manufacturing facility. Any mishandling of battery cells may cause disruption to the operation of our facilities. While we have implemented safety procedures related to the handling of the cells, there can be no assurance that a safety issue or fire related to the cells would not disrupt our operations. Such damage or injury would likely lead to adverse publicity and potentially a safety recall. Moreover, any failure of a competitors electric vehicle, especially those that use a high volume of commodity cells similar to the Tesla Roadster or Model S, may cause indirect adverse publicity for us and our electric vehicles. Such adverse publicity would negatively affect our brand and harm our business, prospects, financial condition and operating results.
If our vehicles fail to perform as expected, or if we suffer product recalls for our upcoming Model S, our ability to develop, market and sell our electric vehicles could be harmed.
Our vehicles may contain defects in design and manufacture that may cause them not to perform as expected or that may require repair. For example, our vehicles use a substantial amount of software code to operate. Software products are inherently complex and often contain defects and errors when first introduced. While we have performed extensive internal testing, we currently have a limited frame of reference by which to evaluate the long-term performance of our Tesla Roadster. We have no frame of reference by which to evaluate our Model S upon which our business prospects depend. There can be no assurance that we will be able to detect and fix any defects in the vehicles prior to their sale to consumers. We experienced product recalls in May 2009 and October 2010, both of which were unrelated to our electric powertrain. In May 2009, we initiated a product recall after we determined that a condition caused by insufficient torquing of the rear inner hub flange bolt existed in some of our Tesla Roadsters, as a result of a missed process during the manufacture of the Tesla Roadster glider, which is the partially assembled Tesla Roadster that does not contain our electric powertrain. In October 2010, we initiated a product recall after the 12 volt, low voltage auxiliary cable in a single vehicle chafed against the edge of a carbon fiber panel in the vehicle causing a short, smoke and possible fire behind the right front headlamp of the vehicle. Although the cost of the most recent recall was not material, we may experience additional recalls in the future, which could adversely affect our brand in our target markets and could adversely affect our business, prospects and results of operations.
Our electric vehicles, including the Tesla Roadster and Model S, may not perform consistent with customers expectations or consistent with other vehicles currently available. For example, our electric vehicles may not have the durability or longevity of current vehicles, and may not be as easy to repair as other vehicles currently on the market. Additionally, while we are designing Model S with the intent to achieve a five star safety rating and an estimated 300 mile range while traveling at a steady speed of 55 miles per hour, there is no assurance that we will be able to achieve these performance levels. Any product defects or any other failure of our performance electric vehicles to perform as expected could harm our reputation and result in adverse publicity, lost revenue, delivery delays, product recalls, product liability claims, harm to our brand and reputation, and significant warranty and other expenses, and could have a material adverse impact on our business, financial condition, operating results and prospects.
33
We have a history of losses and we expect significant increases in our costs and expenses to result in continuing losses for at least the remainder of 2012.
We incurred a net loss of $254.4 million for the year ended December 31, 2011. In addition, we have accumulated net losses of $669.4 million from our inception through December 31, 2011. We have had net losses in each quarter since our inception. We believe that we will continue to incur operating and net losses each quarter until at least the time we begin significant deliveries of Model S, which is not expected to be in production until mid-2012 with higher volume production not occurring until 2013. Even if we are able to successfully develop Model S, there can be no assurance that it will be commercially successful. If we are to ever achieve profitability it will be dependent upon the successful development and successful commercial introduction and acceptance of automobiles such as Model S, which may not occur.
We expect the rate at which we will incur losses to increase significantly in 2012 compared to prior years levels until significant deliveries of Model S begin as we:
| conclude Roadster sales; |
| complete the development services contract for the Toyota RAV4 EV program; |
| experience a drop in powertrain component sales until we commence powertrain component sales for the Toyota RAV4 EV in 2012; |
| design, develop and manufacture our Model S and our planned Model X crossover; |
| design, develop and manufacture components of our electric powertrain; |
| develop and equip the Tesla Factory to produce our Model S; |
| build up inventories of parts and components for our Model S; |
| develop and equip manufacturing facilities to produce our electric powertrain components; |
| open new Tesla stores and service centers; |
| expand our design, development, maintenance and repair capabilities; |
| increase our sales and marketing activities; and |
| increase our general and administrative functions to support our growing operations. |
Because we will incur the costs and expenses from these efforts before we receive any incremental revenues with respect thereto, our losses in future periods will be significantly greater than the losses we would incur if we developed our business more slowly. In addition, we may find that these efforts are more expensive than we currently anticipate or that these efforts may not result in increases in our revenues, which would further increase our losses.
In addition, as of December 31, 2011, we had recorded a full valuation allowance on our United States net deferred tax assets as at this point we believe it is more likely than not that we will not achieve profitability and accordingly be able to use our deferred tax assets in the foreseeable future. Federal and state laws impose substantial restrictions on the utilization of net operating loss and tax credit carry-forwards in the event of an ownership change, as defined in Section 382 of the Internal Revenue Code. Although we do not believe that either our initial public offering (IPO) or subsequent follow-on offering or private placements constituted an ownership change resulting in limitations on our ability to use our net operating loss and tax credit carry-forwards, we have not yet performed a study to determine whether such limitations exist. If an ownership change is deemed to have occurred as a result of our IPO, subsequent follow-on offering, or private placements, utilization of these assets could be significantly reduced.
34
If we are unable to adequately control the costs associated with operating our business, including our costs of manufacturing, sales and materials, our business, financial condition, operating results and prospects will suffer.
If we are unable to maintain a sufficiently low level of costs for designing, manufacturing, marketing, selling and distributing and servicing our electric vehicles relative to their selling prices, our operating results, gross margins, business and prospects could be materially and adversely impacted. We have made, and will be required to continue to make, significant investments for the design, manufacture and sales of our electric vehicles. When we first began delivering our Tesla Roadster in early 2008, our marginal costs of producing the Tesla Roadster exceeded our revenue from selling those vehicles. Revenue from the sales of our Tesla Roadster as well as from ZEV credits did not exceed the cost of revenues related to our Tesla Roadster until the second quarter of 2009. There can be no assurances that our costs of producing and delivering Model S will be less than the revenue we generate from the related sales at the time of Model S launch or that we will achieve our expected gross margin on sales of Model S.
We incur significant costs related to procuring the raw materials required to manufacture our high-performance electric cars, assembling vehicles and compensating our personnel. We will also incur substantial costs in constructing and building out our Model S and powertrain manufacturing facilities, each of which could potentially face cost overruns or delays in construction. If our Model S tooling, production equipment and parts are insufficient for use in Model X, perhaps as a result of a lower level of commonality between the two vehicles than we currently anticipate, our costs related to the production of Model X may exceed expectations.
Additionally, in the future we may be required to incur substantial marketing costs and expenses to promote our vehicles, including through the use of traditional media such as television, radio and print, even though our marketing expenses to date have been relatively limited. If we are unable to keep our operating costs aligned with the level of revenues we generate, our operating results, business and prospects will be harmed. Many of the factors that impact our operating costs are beyond our control. For example, the costs of our raw materials and components, such as lithium-ion battery cells or aluminum body panels used in our vehicles, could increase due to shortages as global demand for these products increases. Indeed, if the popularity of electric vehicles exceeds current expectations without significant expansion in battery cell production capacity and advancements in battery cell technology, shortages could occur which would result in increased materials costs to us.
Increases in costs, disruption of supply or shortage of raw materials, in particular lithium-ion cells, could harm our business.
We may experience increases in the cost or a sustained interruption in the supply or shortage of raw materials. Any such increase or supply interruption could materially negatively impact our business, prospects, financial condition and operating results. We use various raw materials in our business including aluminum, steel, nickel and copper. The prices for these raw materials fluctuate depending on market conditions and global demand for these materials and could adversely affect our business and operating results. For instance, we are exposed to multiple risks relating to price fluctuations for lithium-ion cells. These risks include:
| the inability or unwillingness of current battery manufacturers to build or operate battery cell manufacturing plants to supply the numbers of lithium-ion cells required to support the growth of the electric or plug-in hybrid vehicle industry as demand for such cells increases; |
| disruption in the supply of cells due to quality issues or recalls by battery cell manufacturers; |
| an increase in the cost of raw materials, such as nickel used in lithium-ion cells, or aluminum used in the body of Model S; and |
| fluctuations in the value of the Japanese yen against the U.S. dollar. |
35
Our business is dependent on the continued supply of battery cells for our vehicles and for the battery pack we produce for other automobile manufacturers. While we believe several sources of the battery cells are available for the Tesla Roadster and Model S, we have fully qualified only one supplier for the cells used in each of the Tesla Roadster and Model S. The same is also true for the battery cells used for battery packs that we supply to other OEMs. Any disruption in the supply of battery cells from such vendor could temporarily disrupt production of Model S and of the battery packs we produce for other automobile manufacturers until such time as a different supplier is fully qualified. Furthermore, fluctuations or shortages in petroleum and other economic conditions may cause us to experience significant increases in freight charges and raw material costs. Substantial increases in the prices for our raw materials or prices charged to us, such as those charged by our battery cell manufacturers, would increase our operating costs, and could reduce our margins if we cannot recoup the increased costs through increased electric vehicle prices. There can be no assurance that we will be able to recoup increasing costs of raw materials by increasing vehicle prices. We have also recently announced pricing of Model S. Any attempts to increase the announced prices in response to increased raw material costs could be viewed negatively by our customers, result in cancellations of Model S reservations and could materially adversely affect our brand, image, business, prospects and operating results.
Our future growth is dependent upon consumers willingness to adopt electric vehicles.
Our growth is highly dependent upon the adoption by consumers of, and we are subject to an elevated risk of any reduced demand for, alternative fuel vehicles in general and electric vehicles in particular. If the market for electric vehicles does not develop as we expect or develops more slowly than we expect, our business, prospects, financial condition and operating results will be harmed. The market for alternative fuel vehicles is relatively new, rapidly evolving, characterized by rapidly changing technologies, price competition, additional competitors, evolving government regulation and industry standards, frequent new vehicle announcements and changing consumer demands and behaviors.
Other factors that may influence the adoption of alternative fuel vehicles, and specifically electric vehicles, include:
| perceptions about electric vehicle quality, safety (in particular with respect to lithium-ion battery packs), design, performance and cost, especially if adverse events or accidents occur that are linked to the quality or safety of electric vehicles; |
| perceptions about vehicle safety in general, in particular safety issues that may be attributed to the use of advanced technology, including vehicle electronics and regenerative braking systems; |
| negative perceptions of electric vehicles, such as that they are more expensive than non-electric vehicles and are only affordable with government subsidies; |
| the limited range over which electric vehicles may be driven on a single battery charge; |
| the decline of an electric vehicles range resulting from deterioration over time in the batterys ability to hold a charge and possible EPA actions that could reduce the advertised range on the required vehicle labeling by up to 30%; |
| concerns about electric grid capacity and reliability, which could derail our past and present efforts to promote electric vehicles as a practical solution to vehicles which require gasoline; |
| concerns by potential customers that if their battery pack is not maintained properly, it may become unusable; |
| the availability of alternative fuel vehicles, including plug-in hybrid electric vehicles; |
| improvements in the fuel economy of the internal combustion engine; |
| the availability of service for electric vehicles; |
| consumers desire and ability to purchase a luxury automobile or one that is perceived as exclusive; |
36
| the environmental consciousness of consumers; |
| volatility in the cost of oil and gasoline; |
| consumers perceptions of the dependency of the United States on oil from unstable or hostile countries; |
| government regulations and economic incentives promoting fuel efficiency and alternate forms of energy; |
| access to charging stations, standardization of electric vehicle charging systems and consumers perceptions about convenience and cost to charge an electric vehicle; |
| the availability of tax and other governmental incentives to purchase and operate electric vehicles or future regulation requiring increased use of nonpolluting vehicles; |
| perceptions about and the actual cost of alternative fuel; and |
| macroeconomic factors. |
In addition, reports have suggested the potential for extreme temperatures to affect the range or performance of electric vehicles. Based on internal testing, we estimate that our Tesla Roadster would have a 5-10% reduction in range when operated in -20°C temperatures. To the extent customers have concerns about such reductions or third party reports which suggest reductions in range greater than our estimates gain widespread acceptance, our ability to market and sell our vehicles, particularly in colder climates, may be adversely impacted.
Additionally, we will become subject to regulations that require us to alter the design of our vehicles, which could negatively impact consumer interest in our vehicles. For example, our electric vehicles make less noise than internal combustion vehicles. Due to concerns about overly quiet vehicles and vision impaired pedestrians, in January 2011, Congress passed and the President signed the Pedestrian Safety Enhancement Act of 2010. The new law requires NHTSA to establish minimum sounds for electric vehicles and hybrid electric vehicles when travelling at low speeds. New standards must be proposed by mid-2012 for implementation within three years of the Acts enactment date of January 3, 2011.
The influence of any of the factors described above may cause current or potential customers not to purchase our electric vehicles, which would materially adversely affect our business, operating results, financial condition and prospects.
Our success could be harmed by negative publicity regarding our company or products.
From time to time, our vehicles are evaluated by third parties. For example, the show Top Gear which airs on the British Broadcasting Corporation did a review of the Tesla Roadster in 2008. Top Gear is one of the most watched automotive shows in the world with an estimated 350 million viewers worldwide and is broadcast in over 100 countries. Since originally airing in the fall of 2008, the episode about the Tesla Roadster has been rebroadcast repeatedly around the world. The review of the Tesla Roadster included a number of significant falsehoods regarding the cars performance, range and safety. Such criticisms create a negative public perception about the Tesla Roadster, and to the extent that these comments are believed by the public, may cause current or potential customers not to purchase our electric vehicles, which would materially adversely affect our business, operating results, financial condition and prospects.
The range of our electric vehicles on a single charge declines over time which may negatively influence potential customers decisions whether to purchase our vehicles.
The range of our electric vehicles on a single charge declines principally as a function of usage, time and charging patterns as well as other factors. For example, a customers use of their Tesla vehicle as well as the
37
frequency with which they charge the battery pack of their Tesla vehicle can result in additional deterioration of the battery packs ability to hold a charge. We currently expect that our battery pack for the Tesla Roadster will retain approximately 60-65% of its ability to hold its initial charge after approximately 100,000 miles or seven years, which will result in a decrease to the vehicles initial range. Such battery pack deterioration and the related decrease in range may negatively influence potential customer decisions whether to purchase our vehicles, which may harm our ability to market and sell our vehicles.
We are dependent upon our ability to fully draw down on our loan facility from the United States Department of Energy, which may restrict our ability to conduct our business.
Our plan for manufacturing Model S and for developing our electric powertrain facility depends on our ability to fully draw down on our DOE Loan Facility. Our DOE Loan Facility provides for a $465.0 million loan facility under the DOEs ATVM Program to help finance the continued development of Model S, including the build out and operation of a manufacturing facility, and to finance the build out and operation of our electric powertrain manufacturing facility. We cannot, however, access all of these funds at once, but only through periodic draws through January 2013 as eligible costs are incurred. Through December 31, 2011, we have received loans under our DOE Loan Facility for an aggregate of $276.3 million. Our ability to draw down these funds under the DOE Loan Facility is conditioned upon specified draw conditions. For the Model S manufacturing facility project, the draw conditions include our achievement of progress milestones relating to the design and development of Model S. Additionally, the DOE Loan Facility requires us to comply with certain operating and financial covenants and places additional restrictions on our ability to operate our business. If we do not comply with such requirements of the DOE Loan Facility, such failure, if not waived by the DOE, could cause a default. In the event of a default, we would not be eligible to draw funds under the DOE Loan Facility and existing outstanding loan amounts would become due immediately.
Additionally, if we are unable to draw down the anticipated funds under the DOE Loan Facility, or our ability to make such draw downs is delayed, we may need to obtain additional or alternative financing to operate our Model S and electric powertrain manufacturing facilities to the extent our cash on hand is insufficient. Any failure to obtain the remaining DOE funds or secure other alternative funding could materially and adversely affect our business and prospects. Such additional or alternative financing may not be available on attractive terms, if at all, and could be more costly for us to obtain. As a result, our plans for the build out of our Model S and electric powertrain manufacturing facilities could be significantly delayed which would materially adversely affect our business, prospects, financial condition and operating results.
Our DOE Loan Facility documents contain customary covenants that include, among others, a requirement that the project be conducted in accordance with the business plan for such project, compliance with all requirements of the ATVM Program, and limitations on our and our subsidiaries ability to incur indebtedness, incur liens, make investments or loans, enter into mergers or acquisitions, dispose of assets, pay dividends or make distributions on capital stock, prepay indebtedness, pay management, advisory or similar fees to affiliates, enter into certain affiliate transactions, enter into new lines of business and enter into certain restrictive agreements. These restrictions may limit our ability to operate our business and may cause us to take actions or prevent us from taking actions we believe are necessary from a competitive standpoint or that we otherwise believe are necessary to grow our business.
In addition, our DOE Loan Facility requires Mr. Musk and certain of his affiliates, until one year after we complete the project relating to the Model S Facility, to own at least 65% of the Tesla capital stock held by them as of the date of the DOE Loan Facility, and a failure to comply would be an event of default that could result in an acceleration of all obligations under the DOE Loan Facility documents and the exercise of other remedies by the DOE.
38
The operation of our vehicles is different from internal combustion engine vehicles and our customers may experience difficulty operating them properly, including difficulty transitioning between different methods of braking.
We have designed our vehicles to minimize inconvenience and inadvertent driver damage to the powertrain. In certain instances, these protections may cause the vehicle to behave in ways that are unfamiliar to drivers of internal combustion vehicles. For example, we employ regenerative braking to recharge the battery pack in most modes of vehicle operation. Our customers may become accustomed to using this regenerative braking instead of the wheel brakes to slow the vehicle. However, when the vehicle is at maximum charge, the regenerative braking is not needed and is not employed. Accordingly, our customers may have difficulty shifting between different methods of braking. In addition, we use safety mechanisms to limit motor torque when the powertrain system reaches elevated temperatures. In such instances, the vehicles acceleration and speed will decrease. Finally, if the driver permits the battery pack to substantially deplete its charge, the vehicle will progressively limit motor torque and speed to preserve the charge that remains. The vehicle will lose speed and ultimately coast to a stop. Despite several warnings about an imminent loss of charge, the ultimate loss of speed may be unexpected. There can be no assurance that our customers will operate the vehicles properly, especially in these situations. Any accidents resulting from such failure to operate our vehicles properly could harm our brand and reputation, result in adverse publicity and product liability claims, and have a material adverse affect on our business, prospects, financial condition and operating results. In addition, if consumers dislike these features, they may choose not to buy additional cars from us which could also harm our business and prospects.
Developments in alternative technologies or improvements in the internal combustion engine may materially adversely affect the demand for our electric vehicles.
Significant developments in alternative technologies, such as advanced diesel, ethanol, fuel cells or compressed natural gas, or improvements in the fuel economy of the internal combustion engine, may materially and adversely affect our business and prospects in ways we do not currently anticipate. Any failure by us to develop new or enhanced technologies or processes, or to react to changes in existing technologies, could materially delay our development and introduction of new and enhanced electric vehicles, which could result in the loss of competitiveness of our vehicles, decreased revenue and a loss of market share to competitors.
Our distribution model is different from the predominant current distribution model for automobile manufacturers, which makes evaluating our business, operating results and future prospects difficult.
Our distribution model is not common in the automobile industry today, particularly in the United States. We plan to continue to sell our performance electric vehicles over the internet and in company-owned Tesla stores. This model of vehicle distribution is relatively new and unproven, especially in the United States, and subjects us to substantial risk as it requires, in the aggregate, a significant expenditure and provides for slower expansion of our distribution and sales systems than may be possible by utilizing a more traditional dealer franchise system. For example, we will not be able to utilize long established sales channels developed through a franchise system to increase our sales volume, which may harm our business, prospects, financial condition and operating results. Moreover, we will be competing with companies with well-established distribution channels.
We have opened Tesla stores in the United States, Europe and Japan, many of which have been open for less than one year. We have only limited experience distributing and selling our performance vehicles through our Tesla stores. Our success will depend in large part on our ability to effectively develop our own sales channels and marketing strategies. Implementing our business model is subject to numerous significant challenges, including obtaining permits and approvals from local and state authorities, and we may not be successful in addressing these challenges. In April 2011, we began the roll out of our new interactive store strategy. The concept and layout of these new stores, which are located in high profile retail centers, is different than what has previously been used in automotive sales. We do not know whether our new store strategy will be successful, if consumers will be willing to purchase vehicles in this manner or if these locations will be deemed to comply with
39
applicable zoning restrictions as well as approval and acceptance from the specific high profile retail centers in which we seek to locate our stores. As a result, we may incur additional costs in order to improve or change our retail strategy.
You must consider our business and prospects in light of the risks, uncertainties and difficulties we encounter as we implement our business model. For instance, we will need to persuade customers, suppliers and regulators of the validity and sustainability of our business model. We cannot be certain that we will be able to do so, or to successfully address the risks, uncertainties and difficulties that our business strategy faces. Any failure to successfully address any of the risks, uncertainties and difficulties related to our business model would have a material adverse effect on our business and prospects.
We may face regulatory limitations on our ability to sell vehicles directly or over the internet which could materially and adversely affect our ability to sell our electric vehicles.
We sell our vehicles from our Tesla stores as well as over the internet. We may not be able to sell our vehicles through this sales model in each state in the United States as many states have laws that may be interpreted to prohibit internet sales by manufacturers to residents of the state or to impose other limitations on this sales model, including laws that prohibit manufacturers from selling vehicles directly to consumers without the use of an independent dealership or without a physical presence in the state. For example, the state of Kansas provides that a manufacturer cannot deliver a vehicle to a Kansas resident except through a dealer licensed to do business in the state of Kansas, which may be interpreted to require us to open a store in the state of Kansas in order to sell vehicles to Kansas residents. In some states where we have opened a gallery, which is a location where potential customers can view our vehicles but is not a full retail location, it is possible that a state regulator could take the position that activities at our gallery constitute an unlicensed motor vehicle dealership and thereby violates applicable manufacturer-dealer laws. For example, the state of Colorado required us to obtain dealer and manufacturer licenses in the state in order to operate our gallery in Colorado. In addition, some states have requirements that service facilities be available with respect to vehicles sold in the state, which may be interpreted to also require that service facilities be available with respect to vehicles sold over the internet to residents of the state thereby limiting our ability to sell vehicles in states where we do not maintain service facilities.
The foregoing examples of state laws governing the sale of motor vehicles are just some of the regulations we will face as we sell our vehicles. In many states, the application of state motor vehicle laws to our specific sales model is largely untested under state motor vehicle industry laws, particularly with respect to sales over the internet, and would be determined by a fact specific analysis of numerous factors, including whether we have a physical presence or employees in the applicable state, whether we advertise or conduct other activities in the applicable state, how the sale transaction is structured, the volume of sales into the state, and whether the state in question prohibits manufacturers from acting as dealers. As a result of the fact specific and untested nature of these issues, and the fact that applying these laws intended for the traditional automobile distribution model to our sales model allows for some interpretation and discretion by the regulators, the manner in which the applicable authorities will apply their state laws to our distribution model is unknown. Such laws, as well as other laws governing the motor vehicle industry, may subject us to potential inquiries and investigations from state motor vehicle regulators who may question whether our sales model complies with applicable state motor vehicle industry laws and who may require us to change our sales model or may prohibit our ability to sell our vehicles to residents in such states. In addition, decisions by regulators permitting us to sell vehicles may be subject to challenges as to whether such decisions comply with applicable state motor vehicle industry laws. Such challenges, if successful, could prohibit our ability to sell our vehicles to residents in such states.
We are also registered as both a motor vehicle manufacturer and dealer in Canada, Australia, and Japan, and have obtained licenses to sell vehicles in other countries such as Hong Kong and Singapore. Furthermore, while we have performed an analysis of the principal laws in the European Union relating to our distribution model and believe we comply with such laws, we have not performed a complete analysis in all foreign jurisdictions in
40
which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered or laws we are unaware of in jurisdictions we have entered that may restrict our vehicle reservation practices or other business practices. Even for those jurisdictions we have analyzed, the laws in this area can be complex, difficult to interpret and may change over time.
Regulatory limitations on our ability to sell vehicles could materially and adversely affect our ability to sell our electric vehicles.
Reservations for Model S and Model X are fully refundable to customers, and significant cancellations could harm our financial condition, business, prospects and operating results.
As of December 31, 2011, we had unfilled reservations for over 8,000 Model S sedans, all of which are subject to cancellation by the customer up until such time that the customer enters into a purchase agreement. Historically, all of our reservations have been refundable and we have had a significant number of customers who submitted reservations for the Tesla Roadster cancel those reservations and we have refunded their deposits.
Given the long lead times that we have historically experienced between customer reservation and delivery on the Tesla Roadster and that we expect to experience on Model S and Model X, there is a heightened risk that customers that have made reservations may not ultimately take delivery on vehicles due to potential changes in customer preferences, competitive developments and other factors. For example, when we delayed the introduction of the original Tesla Roadster in the fall of 2007, we experienced a significant number of customers that cancelled their reservations and requested the return of their reservation payment. If we encounter delays in the introduction of Model S or Model X, we believe that a significant number of our customers could similarly cancel their reservations and demand refunds of their reservation payments. As a result, no assurance can be made that reservations will not be cancelled and will ultimately result in the final purchase, delivery, and sale of the vehicle. Given the high level of reservations, significant cancellations could harm our financial condition, business, prospects and operating results.
If we are unable to design, develop, market and sell new electric vehicles and services that address additional market opportunities, our business, prospects and operating results will suffer.
We may not be able to successfully develop new electric vehicles and services, address new market segments or develop a significantly broader customer base. To date, we have focused our business on the sale of high-performance electric vehicles and have targeted relatively affluent consumers. We will need to address additional markets and expand our customer demographic in order to further grow our business. In particular, we intend Model S to appeal to the customers of premium vehicles, which is a much larger and different demographic from that of the Tesla Roadster. Successfully offering a vehicle in this vehicle class requires delivering a vehicle with a higher standard of fit and finish in the interior and exterior than currently exists in the Tesla Roadster, at a price that is competitive with other premium vehicles. We have not completely finalized the design, component sourcing or manufacturing process for Model S, so it is difficult to accurately forecast its final cost, manufacturability or quality. Therefore, there can be no assurance that we will be able to deliver a vehicle that is ultimately competitive in the premium vehicle market. In 2012, we publicly revealed an early prototype of the Model X crossover as the first vehicle we intend to develop by leveraging the Model S platform. We have also previously announced our intent to develop a third generation electric vehicle which we expect to produce at the Tesla Factory after the introduction of Model S. However, we have not yet finalized the design, engineering or component sourcing plans for these vehicles and there are no assurances that we will be able to bring these vehicles to market at the price points and in the volumes as we currently intend, if at all. Our failure to address additional market opportunities would harm our business, prospects, financial condition and operating results.
41
Any changes to the Federal Trade Commissions electric vehicle range testing procedure and recent changes made by the United States Environmental Protection Agencys energy consumption regulations for electric vehicles could result in a reduction to the range of our vehicles as compared to the current combined two-cycle test which could negatively impact our sales and harm our business.
The Federal Trade Commission (FTC) requires us to calculate and display the range of our electric vehicles on a label we affix to the vehicles window. The FTC specifies that we follow testing requirements set forth by the Society of Automotive Engineers (SAE) which further requires that we test using the EPAs combined city and highway testing cycles. In July 2011, the EPA established new requirements for the fuel economy stickers that appear on new cars offered for sale (i.e., the Monroney label). We advertise that we plan to offer Model S with a variety of battery pack options, which we estimate will offer a range on a single charge of 160 miles, 230 miles, and 300 miles, respectively, while traveling at a steady speed of 55 miles per hour. The EPAs new fuel economy requirements will require us to label Model S utilizing new and different energy efficiency testing methodologies. These methodologies differ from the one we have used to estimate the range of the vehicles at a steady speed of 55 miles per hour and could reduce the range reported on the required labeling of our vehicles by a de-rating factor which could be up to 30% as compared to our current estimates. These new requirements apply to all model year 2013 and later vehicles. However, the EPA has also indicated that they would like automobile manufacturers to utilize the new label format as soon as possible. Therefore, it is possible that the EPA will request that we utilize new labels sooner bearing lower range values. Any reduction in the advertised range of our vehicles could negatively impact our vehicle sales and harm our business.
If we are unable to effectively leverage the benefits of using an adaptable common platform architecture in the design and manufacture of future vehicles such as Model X, our business prospects, operating results and financial condition would be adversely affected.
We intend to design Model S with an adaptable platform architecture and common electric powertrain so that we can use the platform of Model S to create future electric vehicles, including, as an example, our Model X crossover vehicle. However, we have no experience with using common platforms in the design and manufacture of our vehicles and the design of Model S is not complete. We may make changes to the design of Model S that may make it more difficult to use the Model S platform for Model X or for future electric vehicles that we decide to produce. Additionally, we intend to use some of our Model S manufacturing equipment and parts tooling for the production of Model X. If such tooling, production equipment and parts are insufficient for use in Model X, perhaps as a result of a lower level of commonality between the two vehicles than we anticipate, our costs related to the production of Model X may exceed expectations. There are no assurances that we will be able to use the Model S platform to bring future vehicle models, including the Model X crossover, to market faster or more inexpensively by leveraging use of this common platform or that there will be sufficient customer demand for any vehicles built on the Model S platform.
We may experience significant delays in the design, manufacture and launch of Model X which could harm our business and prospects.
We plan to start Model X production in late 2013 and ramp up to significant customer deliveries in early 2014. Any delay in the design, manufacture and launch of Model X could materially damage our brand, business, prospects, financial condition and operating results. Automobile manufacturers often experience delays in the design, manufacture and commercial release of new vehicle models. We experienced significant delays in launching the Tesla Roadster, which resulted in additional costs and adverse publicity for our business. We may experience similar delays, cost overruns and adverse publicity in launching Model X, any of which could be significant. We are in the initial design and development stages of Model X. Furthermore, we have not yet begun to evaluate, qualify or select suppliers for the planned production of Model X and cannot begin to do so until the design of Model X is finalized. We may not be able to engage suppliers for the components in a timely manner, at an acceptable price or in the necessary quantities. We will also need to do extensive testing to ensure that Model X is in compliance with applicable NHTSA safety regulations and EPA and CARB emission regulations prior to beginning mass production and delivery of the vehicles. In addition, we have limited resources and, to
42
the extent that such resources are devoted to the manufacture and production of Model S, we may have difficulty producing and delivering our Model X vehicle in a timely manner. If we are not able to manufacture and deliver our Model X in a timely manner and consistent with our budget and cost projections, our business, prospects, operating results and financial condition will be negatively impacted and our ability to grow our business will be harmed.
The automotive market is highly competitive, and we may not be successful in competing in this industry. We currently face competition from new and established competitors and expect to face competition from others in the future.
The worldwide automotive market, particularly for alternative fuel vehicles, is highly competitive today and we expect it will become even more so in the future. Other automobile manufacturers entered the electric vehicle market at the end of 2010 and we expect additional competitors to enter this market. With respect to our Tesla Roadster, we currently face strong competition from established automobile manufacturers, including manufacturers of high-performance vehicles, such as Porsche and Ferrari. In addition, upon the launch of our Model S sedan, we will face competition from existing and future automobile manufacturers in the extremely competitive premium sedan market, including Audi, BMW, Lexus and Mercedes.
Many established and new automobile manufacturers have entered or have announced plans to enter the alternative fuel vehicle market. In Japan, Mitsubishi has been selling its electric iMiEV since April 2010. In December 2010, Nissan introduced in the United States the Nissan Leaf, a fully electric vehicle and Ford introduced the pure electric Ford Focus and plug-in hybrid Ford CMax in 2012. In addition, several manufacturers, including General Motors, Toyota, Ford, and Honda, are each selling hybrid vehicles, and certain of these manufacturers have announced plug-in versions of their hybrid vehicles. For example, in December 2010, General Motors introduced the Chevrolet Volt, which is a plug-in hybrid vehicle that operates purely on electric power for a limited number of miles, at which time an internal combustion engine engages to recharge the battery pack.
Moreover, it has been reported that many of the large OEMs such as BMW, Daimler, Lexus, Audi, Renault and Volkswagen are also developing electric vehicles. Several new start-ups have also announced plans to enter the market for performance electric vehicles, although none of these have yet come to market. Finally, electric vehicles have already been brought to market in China and other foreign countries and we expect a number of those manufacturers to enter the United States market as well.
Most of our current and potential competitors have significantly greater financial, technical, manufacturing, marketing and other resources than we do and may be able to devote greater resources to the design, development, manufacturing, distribution, promotion, sale and support of their products. Virtually all of our competitors have more extensive customer bases and broader customer and industry relationships than we do. In addition, almost all of these companies have longer operating histories and greater name recognition than we do. Our competitors may be in a stronger position to respond quickly to new technologies and may be able to design, develop, market and sell their products more effectively.
Furthermore, certain large manufacturers offer financing and leasing options on their vehicles and also have the ability to market vehicles at a substantial discount, provided that the vehicles are financed through their affiliated financing company. We only began offering a leasing program in February 2010 which is currently only available to qualified Tesla Roadster customers in the United States and Canada. We do not currently plan to offer any lease financing on Model S, but may do so at a later date. We have not in the past, and do not currently, offer customary discounts on our vehicles. The lack of lease financing and the absence of customary vehicle discounts could put us at a competitive disadvantage.
We expect competition in our industry to intensify in the future in light of increased demand for alternative fuel vehicles, continuing globalization and consolidation in the worldwide automotive industry. Factors affecting
43
competition include product quality and features, innovation and development time, pricing, reliability, safety, fuel economy, customer service and financing terms. Increased competition may lead to lower vehicle unit sales and increased inventory, which may result in a further downward price pressure and adversely affect our business, financial condition, operating results and prospects. Our ability to successfully compete in our industry will be fundamental to our future success in existing and new markets and our market share. There can be no assurances that we will be able to compete successfully in our markets. If our competitors introduce new cars or services that compete with or surpass the quality, price or performance of our cars or services, we may be unable to satisfy existing customers or attract new customers at the prices and levels that would allow us to generate attractive rates of return on our investment. Increased competition could result in price reductions and revenue shortfalls, loss of customers and loss of market share, which could harm our business, prospects, financial condition and operating results.
Demand in the automobile industry is highly volatile, which may lead to lower vehicle unit sales and adversely affect our operating results.
Volatility of demand in the automobile industry may materially and adversely affect our business, prospects, operating results and financial condition. The markets in which we currently compete and plan to compete in the future have been subject to considerable volatility in demand in recent periods. For example, according to automotive industry sources, sales of passenger vehicles in North America during the fourth quarter of 2008 were over 30% lower than those during the same period in the prior year. Demand for automobile sales depends to a large extent on general, economic, political and social conditions in a given market and the introduction of new vehicles and technologies. As a new automobile manufacturer and low volume producer, we have less financial resources than more established automobile manufacturers to withstand changes in the market and disruptions in demand. As our business grows, economic conditions and trends in other countries and regions where we sell our electric vehicles will impact our business, prospects and operating results as well. Demand for our electric vehicles may also be affected by factors directly impacting automobile price or the cost of purchasing and operating automobiles such as sales and financing incentives, prices of raw materials and parts and components, cost of fuel and governmental regulations, including tariffs, import regulation and other taxes. Volatility in demand may lead to lower vehicle unit sales and increased inventory, which may result in further downward price pressure and adversely affect our business, prospects, financial condition and operating results. These effects may have a more pronounced impact on our business given our relatively smaller scale and financial resources as compared to many incumbent automobile manufacturers.
Difficult economic conditions may negatively affect consumer purchases of luxury items, such as our performance electric vehicles.
Over the last few years, the deterioration in the global financial markets and continued challenging condition of the macroeconomic environment has negatively impacted consumer spending and we believe has adversely affected the sales of our Tesla Roadster. The automobile industry in particular was severely impacted by the poor economic conditions and several vehicle manufacturing companies, including General Motors and Chrysler, were forced to file for bankruptcy. Sales of new automobiles generally have dropped during this recessionary period. Sales of high-end and luxury consumer products, such as our performance electric vehicles, depend in part on discretionary consumer spending and are even more exposed to adverse changes in general economic conditions. Difficult economic conditions could therefore temporarily reduce the market for vehicles in our price range. Discretionary consumer spending also is affected by other factors, including changes in tax rates and tax credits, interest rates and the availability and terms of consumer credit.
If the current difficult economic conditions continue or worsen, we may experience a decline in the demand for our Tesla Roadster or reservations for our Model S or future vehicles such as Model X, any of which could materially harm our business, prospects, financial condition and operating results. Accordingly, any events that have a negative effect on the United States economy or on foreign economies or that negatively affect consumer confidence in the economy, including disruptions in credit and stock markets, and actual or perceived economic slowdowns, may harm our business, prospects, financial condition and operating results.
44
Our financial results may vary significantly from period-to-period due to the seasonality of our business and fluctuations in our operating costs.
Our operating results may vary significantly from period-to-period due to many factors, including seasonal factors that may have an effect on the demand for our electric vehicles. Demand for new cars in the automobile industry in general, and for high-performance sports vehicles such as the Tesla Roadster in particular, typically decline over the winter season, while sales are generally higher as compared to the winter season during the spring and summer months. Sales of the Tesla Roadster have fluctuated on a seasonal basis with increased sales during the spring and summer months in our second and third fiscal quarters relative to our fourth and first fiscal quarters. We note that, in general, automotive sales tend to decline over the winter season and we anticipate that our sales of Model S, Model X and other models we introduce may have similar seasonality. However, our limited operating history makes it difficult for us to judge the exact nature or extent of the seasonality of our business. Also, any unusually severe weather conditions in some markets may impact demand for our vehicles. Our operating results could also suffer if we do not achieve revenue consistent with our expectations for this seasonal demand because many of our expenses are based on anticipated levels of annual revenue.
In addition, we expect our period-to-period operating results to vary based on our operating costs which we anticipate will increase significantly in future periods as we, among other things, design, develop and manufacture our Model S, Model X and electric powertrain components, build and equip new manufacturing facilities to produce Model S and electric powertrain components, open new Tesla Service Centers with maintenance and repair capabilities, incur costs for warranty repairs or product recalls, if any, increase our sales and marketing activities, and increase our general and administrative functions to support our growing operations. As a result of these factors, we believe that quarter-to-quarter comparisons of our operating results, especially in the short-term, are not necessarily meaningful and that these comparisons cannot be relied upon as indicators of future performance. Moreover, our operating results may not meet expectations of equity research analysts or investors. If any of this occurs, the trading price of our common stock could fall substantially, either suddenly or over time.
If we are unable to establish and maintain confidence in our long-term business prospects among consumers, analysts and within our industry, then our financial condition, operating results, business prospects and stock price may suffer materially.
Our vehicles are highly technical products that require maintenance and support. If we were to cease or cut back operations, even years from now, buyers of our vehicles from years earlier might have much more difficulty in maintaining their vehicles and obtaining satisfactory support. As a result, consumers may be less likely to purchase our vehicles now if they are not convinced that our business will succeed or that our operations will continue for many years. Similarly, suppliers and other third parties will be less likely to invest time and resources in developing business relationships with us if they are not convinced that our business will succeed. For example, during the economic downturn of 2008, we had difficulty raising the necessary funding for our operations, and, as a result, in the fourth quarter of 2008 we had to lay off approximately 60 employees and curtail our expansion plans. In addition, during this period a number of customers canceled their previously placed reservations. If we are required to take similar actions in the future, such actions may result in negative perceptions regarding our long-term business prospects and may lead to cancellations of Model S or Model X reservations.
Accordingly, in order to build and maintain our business, we must maintain confidence among customers, suppliers, analysts and other parties in our liquidity and long-term business prospects. In contrast to some more established automakers, we believe that, in our case, the task of maintaining such confidence may be particularly complicated by factors such as the following:
| our limited operating history; |
| our limited revenues and lack of profitability to date; |
45
| unfamiliarity with or uncertainty about the Tesla Roadster and Model S; |
| uncertainty about the long-term marketplace acceptance of alternative fuel vehicles generally, or electric vehicles specifically; |
| the prospect that we will need ongoing infusions of external capital to fund our planned operations; |
| the size of our expansion plans in comparison to our existing capital base and scope and history of operations; and |
| the prospect or actual emergence of direct, sustained competitive pressure from more established automakers, which may be more likely if our initial efforts are perceived to be commercially successful. |
Many of these factors are largely outside our control, and any negative perceptions about our long-term business prospects, even if exaggerated or unfounded, would likely harm our business and make it more difficult to raise additional funds when needed.
We may need to raise additional funds and these funds may not be available to us when we need them. If we cannot raise additional funds when we need them, our operations and prospects could be negatively affected.
The design, manufacture, sale and servicing of automobiles is a capital intensive business. As of December 31, 2011, we had $492.7 million in principal sources of liquidity available from our cash and cash equivalents, short-term marketable securities, cash held in our dedicated DOE account and the remaining amounts available under the DOE Loan Facility. This includes our cash and cash equivalents in the amount of $255.3 million which includes investments in money market funds, short-term marketable securities of $25.1 million, cash of $23.5 million deposited in a dedicated DOE account in accordance with the requirements of our DOE Loan Facility, and $188.8 million available under the DOE Loan Facility. We expect that these principal sources of liquidity together with our current projections of cash flow from operating activities will provide us adequate liquidity until we reach profitability in 2013. However, if there are delays in the launch of Model S or Model X, if we are unable to draw down the anticipated funds under the DOE Loan Facility for any reason, including our failure to meet operating or financial covenants, or if the costs in building our Model S, Model X and powertrain manufacturing facilities exceed our expectations or if we incur any significant unplanned expenses or embark on new significant strategic investments, we may need to raise additional funds through the issuance of equity, equity-related or debt securities or through obtaining credit from government or financial institutions. This capital will be necessary to fund our ongoing operations, continue research and development projects, including those for our planned Model X crossover, establish sales and service centers, improve infrastructure such as expanded battery assembly facilities, and to make the investments in tooling and manufacturing capital required to introduce Model S and Model X.
In particular, we have only recently begun to accept customer reservation payments on our Model X crossover, can provide no assurance that customers will be willing to make such payments and accordingly may be reliant on other financing sources to fund the development of this vehicle. We cannot be certain that additional funds will be available to us on favorable terms when required, or at all. If we cannot raise additional funds when we need them, our financial condition, results of operations, business and prospects could be materially adversely affected. Additionally, under our DOE Loan Facility, we face restrictions on our ability to incur additional indebtedness, and in the future may need to obtain a waiver from the DOE in order to do so. We may not be able to obtain such waiver from the DOE which may harm our business. Future issuance of equity or equity-related securities will dilute the ownership interest of existing stockholders and our issuance of debt securities could increase the risk or perceived risk of our company.
46
We have very limited experience servicing our vehicles and we are using a different service model from the one typically used in the industry. If we are unable to address the service requirements of our existing and future customers our business will be materially and adversely affected.
If we are unable to successfully address the service requirements of our existing and future customers our business and prospects will be materially and adversely affected. In addition, we anticipate the level and quality of the service we provide our Tesla Roadster customers will have a direct impact on the success of Model S and our future vehicles. If we are unable to satisfactorily service our Tesla Roadster customers, our ability to generate customer loyalty, grow our business and sell additional Tesla Roadsters as well as Model S sedans could be impaired.
We have very limited experience servicing our vehicles. We do not plan to begin production of any Model S vehicles until mid-2012 with higher volume production not occurring until 2013, and do not have any experience servicing these cars as they do not exist currently. Servicing electric vehicles is different than servicing vehicles with internal combustion engines and requires specialized skills, including high voltage training and servicing techniques.
We plan to service our performance electric vehicles through our company-owned Tesla service centers and through our mobile service technicians known as the Tesla Rangers. Many of our Tesla stores are equipped to actively service our performance electric vehicles. However, our new design stores do not have servicing capabilities, certain stores have been open for less than one year, and to date we have only limited experience servicing our performance vehicles through our Tesla stores. Going forward, we intend to build separate sales and service locations in several markets, but to date have limited experience with separate sales and service locations within a geographic market. We will need to open additional Tesla stores with service capabilities and standalone service locations, as well as hire and train significant numbers of new employees to staff these centers and act as Tesla Rangers, in order to successfully maintain our fleet of delivered performance electric vehicles. We only implemented our Tesla Rangers program in October 2009 and have limited experience in deploying them to service our customers vehicles. There can be no assurance that these service arrangements or our limited experience servicing our vehicles will adequately address the service requirements of our customers to their satisfaction, or that we will have sufficient resources to meet these service requirement in a timely manner as the volume of vehicles we are able to deliver annually increases.
We do not expect to be able to open Tesla stores in all the geographic areas in which our existing and potential customers may reside. In order to address the service needs of customers that are not in geographical proximity to our service centers, we plan to either transport those vehicles to the nearest Tesla store or service center for servicing or deploy our mobile Tesla Rangers to service the vehicles at the customers location. These special arrangements may be expensive and we may not be able to recoup the costs of providing these services to our customers. In addition, a number of potential customers may choose not to purchase our vehicles because of the lack of a more widespread service network. If we do not adequately address our customers service needs, our brand and reputation will be adversely affected, which in turn, could have a material and adverse impact on our business, financial condition, operating results and prospects.
Traditional automobile manufacturers in the United States do not provide maintenance and repair services directly. Consumers must rather service their vehicles through franchised dealerships or through third party maintenance service providers. We do not have any such arrangements with third party service providers and it is unclear when or even whether such third party service providers will be able to acquire the expertise to service our vehicles. At this point, we anticipate that we will be providing substantially all of the service for our vehicles for the foreseeable future. As our vehicles are placed in more locations, we may encounter negative reactions from our consumers who are frustrated that they cannot use local service stations to the same extent as they have with their conventional automobiles and this frustration may result in negative publicity and reduced sales, thereby harming our business and prospects.
47
In addition, the motor vehicle industry laws in many states require that service facilities be available with respect to vehicles physically sold from locations in the state. Whether these laws would also require that service facilities be available with respect to vehicles sold over the internet to consumers in a state in which we have no physical presence is uncertain. While we believe our Tesla Ranger program and our practice of shipping customers vehicles to our nearest Tesla store for service would satisfy regulators in these circumstances, without seeking formal regulatory guidance, there are no assurances that regulators will not attempt to require that we provide physical service facilities in their states. Further, certain state franchise laws which prohibit manufacturers from being licensed as a dealer or acting in the capacity of dealer also restrict manufacturers from providing vehicle service. If issues arise in connection with these laws, certain aspects of Teslas service program would need to be restructured to comply with state law, which may harm our business.
We may not succeed in maintaining and strengthening the Tesla brand, which would materially and adversely affect customer acceptance of our vehicles and components and our business, revenues and prospects.
Our business and prospects are heavily dependent on our ability to develop, maintain and strengthen the Tesla brand. Any failure to develop, maintain and strengthen our brand may materially and adversely affect our ability to sell the Tesla Roadster, Model S, Model X and future planned electric vehicles, and sell our electric powertrain components. If we do not continue to establish, maintain and strengthen our brand, we may lose the opportunity to build a critical mass of customers. Promoting and positioning our brand will likely depend significantly on our ability to provide high quality electric cars and maintenance and repair services, and we have very limited experience in these areas. Any problems associated with the launch of our Model S sedan may hurt the Tesla brand.
In addition, we expect that our ability to develop, maintain and strengthen the Tesla brand will also depend heavily on the success of our marketing efforts. To date, we have limited experience with marketing activities as we have relied primarily on the internet, word of mouth and attendance at industry trade shows to promote our brand. To further promote our brand, we may be required to change our marketing practices, which could result in substantially increased advertising expenses, including the need to use traditional media such as television, radio and print. The automobile industry is intensely competitive, and we may not be successful in building, maintaining and strengthening our brand. Many of our current and potential competitors, particularly automobile manufacturers headquartered in Detroit, Japan and the European Union, have greater name recognition, broader customer relationships and substantially greater marketing resources than we do. If we do not develop and maintain a strong brand, our business, prospects, financial condition and operating results will be materially and adversely impacted.
Our recent agreement with Toyota contains risks and uncertainties that, if realized, could have a materially adverse impact on our operating results.
In July 2011, we entered into a supply and services agreement with Toyota for the supply of a validated electric powertrain system, including a battery pack, charging system, inverter, motor, gearbox and associated software which will be integrated into an electric vehicle version of the Toyota RAV4. Pursuant to this agreement, we expect that Toyota will pay us approximately $100 million between 2012 and 2014 based on our delivery of electric powertrain systems. The payments to us are not guaranteed and will only occur upon the delivery of powertrain systems that meet Toyotas specifications. Toyota has no obligation to buy any systems from us, and if Toyota does not order the anticipated systems from us, we will not receive the revenues we anticipate from this agreement. The agreement further requires that we meet customary obligations such as timely deliveries, warranty and product defect obligations. Our failure to meet these obligations could have a materially adverse impact on our operating results.
Additionally, although we have discussed new business opportunities with Toyota, there is no guarantee that we will be able to reach agreement with Toyota regarding such opportunities at all or on terms and conditions that are favorable to us.
48
We are currently expanding and improving our information technology systems. If these implementations are not successful, our business and operations could be disrupted and our operating results could be harmed.
We are currently expanding and improving our information technology systems to assist us in the management of our business. In particular, our production of Model S will necessitate the improvement, design and development of more expanded supply chain systems to support our operations as well as production and shop floor management. Additionally, we will need to continually build out and improve upon our online customer interface systems as well as enhance the integration of our software systems used to share data between engineering, supply chain and manufacturing in order to be able to efficiently mass produce Model S. The implementation of new software management platforms and the addition of these platforms at new locations require significant management time, support and cost. Moreover, there are inherent risks associated with developing, improving and expanding our core systems, including supply chain disruptions that may affect our ability to obtain supplies when needed or to deliver vehicles to our Tesla stores and customers. We cannot be sure that these expanded systems will be fully or effectively implemented on a timely basis, if at all. If we do not successfully implement this project, our operations may be disrupted and our operating results could be harmed. In addition, the new systems may not operate as we expect them to, and we may be required to expend significant resources to correct problems or find alternative sources for performing these functions.
If our vehicle owners customize our vehicles or change the charging infrastructure with aftermarket products, the vehicle may not operate properly, which could harm our business.
Automobile enthusiasts may seek to hack our vehicles to modify its performance which could compromise vehicle safety systems. Also, we are aware of customers who have customized their vehicles with after-market parts that may compromise driver safety. For example, some customers have installed seats that elevate the driver such that airbag and other safety systems could be compromised. Other customers have changed wheels and tires, while others have installed large speaker systems that may impact the electrical systems of the vehicle. We have not tested, nor do we endorse, such changes or products. In addition, customer use of improper external cabling or unsafe charging outlets can expose our customers to injury from high voltage electricity. Such unauthorized modifications could reduce the safety of our vehicles and any injuries resulting from such modifications could result in adverse publicity which would negatively affect our brand and harm our business, prospects, financial condition and operating results.
The success of our business depends on attracting and retaining a large number of customers. If we are unable to do so, we will not be able to achieve profitability.
Our success depends on attracting a large number of potential customers to purchase our electric vehicles. As of December 31, 2011, we had accepted reservations for over 8,000 Model S sedans. If our existing and prospective customers do not perceive our vehicles and services to be of sufficiently high value and quality, cost competitive and appealing in aesthetics or performance, or if the final production version of Model S is not sufficiently similar to the drivable design prototype, we may not be able to retain our current customers or attract new customers, investors may lose confidence in us, and our business and prospects, operating results and financial condition may suffer as a result. In addition, because our performance electric vehicles to date have been sold largely through word of mouth marketing efforts, we may be required to incur significantly higher and more sustained advertising and promotional expenditures than we have previously incurred to attract customers, and use more traditional advertising techniques. In addition, if we engage in traditional advertising, we may face review by consumer protection enforcement agencies and may incur significant expenses to ensure that our advertising claims are fully supported. To date, we have limited experience selling our electric vehicles and we may not be successful in attracting and retaining a large number of customers. For example, a significant number of our stores have been open for less than one year and a portion of our sales team come from backgrounds other than automotive. If for any of these reasons we are not able to attract and maintain customers, our business, prospects, operating results and financial condition would be materially harmed.
49
Regulators could review our practice of taking reservation payments and, if the practice is deemed to violate applicable law, we could be required to pay penalties or refund the reservation payments that we have received for vehicles that are not immediately available for delivery, to stop accepting additional reservation payments, to restructure certain aspects of our reservation program, and potentially to suspend or revoke our licenses to manufacture and sell our vehicles.
We have not yet commenced production of our Model S sedan which we currently plan for mid-2012. We have also not commenced production of our Model X crossover which we currently plan to do in late 2013 and ramp up to significant customer deliveries in early 2014. For customers interested in making a reservation for Model S or Model X, we require an initial refundable reservation payment of at least $5,000. As of December 31, 2011, we had collected reservation payments for Model S sedans in an aggregate amount of $90.0 million. We started taking reservations for Model X in February 2012. At this time, we do not plan to hold reservation payments separately or in an escrow or trust fund or pay any interest on reservation payments except to the extent applicable state laws require us to do so. We generally use these funds for working capital and other general corporate purposes.
California laws, and potentially the laws of other states, restrict the ability of licensed auto dealers to advertise or take deposits for vehicles before the vehicles are available to the dealer from the manufacturer. In November 2007, we became aware that the New Motor Vehicle Board of the California Department of Transportation has considered whether our reservation policies and advertising comply with the California Vehicle Code. To date, we have not received any communications on this topic from the New Motor Vehicle Board or the Department of Motor Vehicles (DMV), which has the power to enforce these laws. There can be no assurance that the DMV will not take the position that our vehicle reservation or advertising practices violate the law. We expect that if the DMV determines that we may have violated the law, it would initially discuss its concerns with us and request voluntary compliance. If we are ultimately found to be in violation of California law, we might be precluded from taking reservation payments, and the DMV could take other actions against us, including levying fines and requiring us to refund reservation payments. Resolution of any inquiry may also involve restructuring certain aspects of the reservation program. In addition, California is currently the only jurisdiction in which we have licenses to both manufacture and sell our vehicles so any limitation imposed on our operations in California may be particularly damaging to our business. The DMV also has the power to suspend licenses to manufacture and sell vehicles in California, following a hearing on the merits, which it has typically exercised in cases of significant or repeat violations and/or a refusal to comply with DMV directions.
Certain states may have specific laws which apply to reservation payments accepted by dealers, or manufacturers selling directly to consumers, or both. For example, the state of Washington requires that reservation payments or other payments received from residents in the state of Washington must be placed in a segregated account until delivery of the vehicle, which account must be unencumbered by any liens from creditors of the dealer and may not be used by the dealer. Consequently, we established a segregated account for reservation payments in the state of Washington in January 2010. There can be no assurance that other state or foreign jurisdictions will not require similar segregation of reservation payments received from customers. Our inability to access these funds for working capital purposes could harm our liquidity.
Furthermore, while we have performed an analysis of the principal laws in the European Union relating to our distribution model and believe we comply with such laws, we have not performed a complete analysis in all foreign jurisdictions in which we may sell vehicles. Accordingly, there may be laws in jurisdictions we have not yet entered or laws we are unaware of in jurisdictions we have entered that may restrict our vehicle reservation practices or other business practices. Even for those jurisdictions we have analyzed, the laws in this area can be complex, difficult to interpret and may change over time. If our vehicle reservation or advertising practices or other business practices were found to violate the laws of a jurisdiction, we may face exposure under those laws and our business and prospects would be adversely affected. For example, if we are required to return reservation payment amounts, we may need to raise additional funds to make such payments. There can be no assurance that such funding would be available on a timely basis on commercially reasonable terms, if at all. If a court were to
50
find that our reservation agreement or advertising does not comply with state laws, we may face exposure under those laws which may include exposure under consumer protection statutes such as those that deal with unfair competition and false advertising. Moreover, reductions in our cash as a result of redemptions or an inability to take reservation payments could also make it more difficult for us to obtain additional financing. The prospect of reductions in cash, even if unrealized, may also make it more difficult to obtain financing.
Our plan to expand our network of Tesla stores will require significant cash investments and management resources and may not meet our expectations with respect to additional sales of our electric vehicles. In addition, we may not be able to open stores in certain states.
Our plan to expand our network of Tesla stores will require significant cash investments and management resources and may not meet our expectations with respect to additional sales of our electric vehicles. This planned global expansion of Tesla stores may not have the desired effect of increasing sales and expanding our brand presence to the degree we are anticipating. Furthermore there can be no assurances that we will be able to construct additional storefronts on the budget or timeline we have established. We will also need to ensure we are in compliance with any regulatory requirements applicable to the sale of our vehicles in those jurisdictions, which could take considerable time and expense. If we experience any delays in expanding our network of Tesla stores, this could lead to a decrease in sales of our vehicles and could negatively impact our business, prospects, financial condition and operating results. We have opened Tesla stores in major metropolitan areas throughout North America, Europe and Asia. We plan to open additional stores, with a goal of establishing approximately 50 stores globally within the next several years in connection with the Model S rollout. However, we may not be able to expand our network at such rate and our planned expansion of our network of Tesla stores will require significant cash investment and management resources, as well as efficiency in the execution of establishing these storefronts and in hiring and training the necessary employees to effectively sell our vehicles.
Furthermore, certain states and foreign jurisdictions may have permit requirements, franchise dealer laws or similar laws or regulations that may preclude or restrict our ability to open stores or sell vehicles out of such states and jurisdictions. Any such prohibition or restriction may lead to decreased sales in such jurisdictions, which could harm our business, prospects and operating results.
We face risks associated with our international operations, including unfavorable regulatory, political, tax and labor conditions, which could harm our business.
We face risks associated with our international operations, including possible unfavorable regulatory, political, tax and labor conditions, which could harm our business. We currently have international operations and subsidiaries in Australia, Canada, Denmark, France, Germany, Hong Kong, Italy, Japan, Monaco, Netherlands, Norway, Singapore, Switzerland and the United Kingdom that are subject to the legal, political, regulatory and social requirements and economic conditions in these jurisdictions. Additionally, as part of our growth strategy, we intend to expand our sales, maintenance and repair services internationally. However, we have limited experience to date selling and servicing our vehicles internationally and such expansion would require us to make significant expenditures, including the hiring of local employees and establishing facilities, in advance of generating any revenue. We are subject to a number of risks associated with international business activities that may increase our costs, impact our ability to sell our electric vehicles and require significant management attention. These risks include:
| conforming our vehicles to various international regulatory requirements where our vehicles are sold, or homologation; |
| difficulty in staffing and managing foreign operations; |
| difficulties attracting customers in new jurisdictions; |
| foreign government taxes, regulations and permit requirements, including foreign taxes that we may not be able to offset against taxes imposed upon us in the United States, and foreign tax and other laws limiting our ability to repatriate funds to the United States; |
51
| fluctuations in foreign currency exchange rates and interest rates, including risks related to any interest rate swap or other hedging activities we undertake; |
| our ability to enforce our contractual and intellectual property rights, especially in those foreign countries that do not respect and protect intellectual property rights to the same extent as do the United States, Japan and European countries, which increases the risk of unauthorized, and uncompensated, use of our technology; |
| United States and foreign government trade restrictions, tariffs and price or exchange controls; |
| foreign labor laws, regulations and restrictions; |
| preferences of foreign nations for domestically produced vehicles; |
| changes in diplomatic and trade relationships; |
| political instability, natural disasters, war or events of terrorism; and |
| the strength of international economies. |
If we fail to successfully address these risks, our business, prospects, operating results and financial condition could be materially harmed.
Foreign currency movements relative to the U.S. dollar could harm our financial results.
Our revenues and costs denominated in foreign currencies are not completely matched. For example, a portion of our costs and expenses for the year ended December 31, 2011 was denominated in foreign currencies, principally the British pound. This is primarily due to the contract with Lotus in the United Kingdom to assemble the Tesla Roadster vehicles and gliders. If the value of the U.S. dollar depreciates significantly against the British pound, our costs as measured in U.S. dollars will correspondingly increase. Similarly, a weakening of the U.S. dollar against the Japanese yen or another Asian currency could cause our component costs to increase. However, we do not currently have sufficient revenues denominated in these currencies to fully offset the impact of such cost increases. As a result, our operating results could be adversely affected. Conversely, we have greater revenues than costs denominated in other currencies, principally the euro. In this case, a strengthening of the dollar against the euro from current levels would tend to reduce our revenues as measured in U.S. dollars.
The unavailability, reduction or elimination of government and economic incentives could have a material adverse effect on our business, financial condition, operating results and prospects.
Any reduction, elimination or discriminatory application of government subsidies and economic incentives because of policy changes, the reduced need for such subsidies and incentives due to the perceived success of the electric vehicle, fiscal tightening or other reasons may result in the diminished competitiveness of the alternative fuel vehicle industry generally or our electric vehicles in particular. This could materially and adversely affect the growth of the alternative fuel automobile markets and our business, prospects, financial condition and operating results.
Our growth depends in part on the availability and amounts of government subsidies and economic incentives for alternative fuel vehicles generally and performance electric vehicles specifically. For example, in December 2009, we finalized an arrangement with the California Alternative Energy and Advanced Transportation Financing Authority that will result in an exemption from California state sales and use taxes for up to $320 million of manufacturing equipment. To the extent all of this equipment is purchased and would otherwise be subject to California state sales and use tax, we believe this incentive would result in tax savings by us of up to approximately $31 million over a three year period starting in December 2009. This exemption is only available for equipment that would otherwise be subject to California sales and use taxes and that would be used only for the following three purposes: to establish our production facility for the Model S sedan, to upgrade our Palo Alto powertrain production facility, and to expand our current Tesla Roadster assembly operations at our Menlo Park facility. If we fail to meet these conditions, we would be unable to take full advantage of this tax incentive and our financial position could be harmed.
52
In addition, certain regulations and laws that encourage sales of electric cars through tax credits or other subsidies could be reduced, eliminated or applied in a way that creates an adverse effect against our vehicles, either currently or at any time in the future. For example, while the federal and state governments have from time to time enacted tax credits and other incentives for the purchase of alternative fuel cars, our competitors have more experience and greater resources in working with legislators than we do, and so there is no guarantee that our vehicles would be eligible for tax credits or other incentives provided to alternative fuel vehicles in the future. This would put our vehicles at a competitive disadvantage. As an example at the state level, California recently renewed a rebate program for the purchase of qualified alternative technology vehicles, but reduced the rebate amount from $5,000 per vehicle to $2,500 per vehicle due to fewer funds available and increased demand. When these funds run out, there is no mechanism in place to replenish them until the next fiscal year. Subsequent purchasers would face a delay in receiving rebates since they would have to wait until the next fiscal years funding became available. As an additional example, there is considerable discussion at the federal level over tax reform. Discussions have included reducing or even eliminating the current $7,500 tax credit available to purchasers of qualified alternative fuel vehicles, including the Tesla Roadster and Model S. Also, government disincentives have been enacted in Europe for gas-powered vehicles, which discourage the use of such vehicles and allow us to set a higher sales price for the Tesla Roadster in Europe. In the event that such disincentives are reduced or eliminated, sales of electric vehicles, including our Tesla Roadster and our Model S, could be adversely affected. Furthermore, low volume manufacturers are exempt from certain regulatory requirements in the United States and the European Union. This provides us with an advantage over high volume manufacturers that must comply with such regulations. Once we reach a certain threshold number of sales in each of the United States and the European Union, we will no longer be able to take advantage of such exemptions in the respective jurisdictions, which could lead us to incur additional design and manufacturing expense. We do not anticipate that we will be able to take advantage of these exemptions with respect to Model S which we plan to produce at significantly higher volumes than the Tesla Roadster.
If we are unable to grow our sales of electric vehicle components to original equipment manufacturers our financial results may suffer.
We may have trouble attracting and retaining powertrain customers which could adversely affect our business prospects and results. Daimler and its affiliates and Toyota and its affiliates are currently the only customers of our electric powertrain sales and development services. While we recently received a letter of intent from Daimler for a full electric powertrain program for a vehicle in the Mercedes line and a purchase order to begin this development, there is no guarantee that we will be able to secure future business with Daimler or its affiliates. Even if we can attract and retain powertrain customers, there is no assurance that we can adequately pursue such opportunities simultaneously with the execution of our plans for our vehicles.
Our relationship with Daimler is subject to various risks which could adversely affect our business and future prospects.
While we recently received a letter of intent from Daimler for a full electric powertrain program for a vehicle in the Mercedes line and a purchase order to begin this development, our relationship with Daimler poses various risks to us including:
| potential loss of access to parts that Daimler is providing for Model S; and |
| potential loss of business and adverse publicity to our brand image if there are defects or other problems discovered with our electric powertrain components that Daimler has incorporated into their vehicles. |
The occurrence of any of the foregoing could adversely affect our business, prospects, financial condition and operating results.
53
In addition, our exclusivity and intellectual property agreement, or EIP Agreement, with Daimler North America Corporation (DNAC), an affiliate of Daimler provides that, if a Daimler competitor offers to enter into a competitive strategic transaction with us, we are required to give DNAC notice of such offer and DNAC will have a specified period of time in which to notify us whether it wishes to enter into such transaction with us on the same terms as offered by the third party. Because we will be able to enter into such a transaction with a third party only if DNAC declines to do so, this may decrease the likelihood that we will receive offers from third parties to enter into strategic arrangements in the future.
We may not be able to identify adequate strategic relationship opportunities, or form strategic relationships, in the future.
Strategic business relationships will be an important factor in the growth and success of our business. For example, our strategic relationship with Daimler has provided us with various benefits and we have entered into an agreement for the supply of a validated electric powertrain for the Toyota RAV4 with Toyota. However, there are no assurances that we will be able to identify or secure suitable business relationship opportunities in the future or our competitors may capitalize on such opportunities before we do. Our strategic relationship with Daimler involved Blackstar, an affiliate of Daimler, making a significant equity investment in us as well as a representative from Daimler, Dr. Herbert Kohler, joining our Board. In addition, Toyota made a significant equity investment in us concurrent with the closing of our IPO in July 2010. We may not be able to offer similar benefits to other companies that we would like to establish and maintain strategic relationships with which could impair our ability to establish such relationships. Moreover, identifying such opportunities could demand substantial management time and resources, and negotiating and financing relationships involves significant costs and uncertainties. If we are unable to successfully source and execute on strategic relationship opportunities in the future, our overall growth could be impaired, and our business, prospects and operating results could be materially adversely affected.
If we are unable to keep up with advances in electric vehicle technology, we may suffer a decline in our competitive position.
We may be unable to keep up with changes in electric vehicle technology and, as a result, may suffer a decline in our competitive position. Any failure to keep up with advances in electric vehicle technology would result in a decline in our competitive position which would materially and adversely affect our business, prospects, operating results and financial condition. Our research and development efforts may not be sufficient to adapt to changes in electric vehicle technology. As technologies change, we plan to upgrade or adapt our vehicles and introduce new models in order to continue to provide vehicles with the latest technology, in particular battery cell technology. However, our vehicles may not compete effectively with alternative vehicles if we are not able to source and integrate the latest technology into our vehicles. For example, we do not manufacture battery cells, which makes us dependent upon other suppliers of battery cell technology for our battery packs.
If we fail to manage future growth effectively, we may not be able to market and sell our vehicles successfully.
Any failure to manage our growth effectively could materially and adversely affect our business, prospects, operating results and financial condition. We continue to expand our operations significantly, and additional significant expansion will be required, especially in connection with the establishment of our Model S manufacturing facility, our electric powertrain manufacturing facility, the expansion of our network of Tesla stores and service centers, our mobile Tesla Rangers program and requirements of being a public company. Our future operating results depend to a large extent on our ability to manage this expansion and growth successfully. Risks that we face in undertaking this expansion include:
| training new personnel; |
| forecasting production and revenue; |
54
| controlling expenses and investments in anticipation of expanded operations; |
| establishing or expanding design, manufacturing, sales and service facilities; |
| implementing and enhancing manufacturing and administrative infrastructure, systems and processes; |
| addressing new markets; and |
| expanding international operations. |
We intend to continue to hire a significant number of additional personnel, including design and manufacturing personnel and service technicians for our performance electric vehicles. Because our high-performance vehicles are based on a different technology platform than traditional internal combustion engines, individuals with sufficient training in performance electric vehicles may not be available to hire, and we will need to expend significant time and expense training the employees we do hire. Competition for individuals with experience designing, manufacturing and servicing electric vehicles is intense, and we may not be able to attract, assimilate, train or retain additional highly qualified personnel in the future. The failure to attract, integrate, train, motivate and retain these additional employees could seriously harm our business and prospects.
If we are unable to attract and/or retain key employees and hire qualified management, technical vehicle engineering, and manufacturing personnel, our ability to compete could be harmed and our stock price may decline.
The loss of the services of any of our key employees could disrupt our operations, delay the development and introduction of our vehicles and services, and negatively impact our business, prospects and operating results as well as cause our stock price to decline. In particular, we are highly dependent on the services of Elon Musk, our Chief Executive Officer, Product Architect and Chairman of our Board of Directors, and JB Straubel, our Chief Technical Officer. None of our key employees is bound by an employment agreement for any specific term. There can be no assurance that we will be able to successfully attract and retain senior leadership necessary to grow our business. Our future success depends upon our ability to attract and retain our executive officers and other key technology, sales, marketing, engineering, manufacturing and support personnel and any failure to do so could adversely impact our business, prospects, financial condition and operating results. We have in the past and may in the future experience difficulty in retaining members of our senior management team as well as technical, vehicle engineering and manufacturing personnel due to various factors, such as a very competitive labor market for talented individuals with automotive experience. In addition, we do not have key person life insurance policies covering any of our officers or other key employees. There is increasing competition for talented individuals with the specialized knowledge of electric vehicles and this competition affects both our ability to retain key employees and hire new ones. In particular, as we prepare for the launch of Model S, we will have to significantly ramp up hiring of manufacturing personnel, and finding manufacturing personnel in sufficient numbers, at the required times and with the needed skill sets may be difficult.
We are highly dependent on the services of Elon Musk, our Chief Executive Officer.
We are highly dependent on the services of Elon Musk, our Chief Executive Officer, Product Architect, Chairman of our Board of Directors and largest stockholder. Although Mr. Musk spends significant time with Tesla and is highly active in our management, he does not devote his full time and attention to Tesla. Mr. Musk also currently serves as Chief Executive Officer and Chief Technical Officer of Space Exploration Technologies, a developer and manufacturer of space launch vehicles, and Chairman of SolarCity, a solar equipment installation company.
In addition, our financing agreements with Blackstar contain certain covenants relating to Mr. Musks employment as our Chief Executive Officer. These covenants provide that if Mr. Musk is not serving as our Chief Executive Officer at any time until the later of December 31, 2012 or the launch of Model S, Mr. Musk shall promptly propose a successor Chief Executive Officer and Dr. Kohler, or his successor, must consent to any
55
appointment of such person by our Board of Directors. If at any time during the period from January 1, 2011 through December 31, 2012, Mr. Musk is not serving as either our Chief Executive Officer or Chairman of our Board of Directors for reasons other than his death or disability, and Dr. Kohler, or his successor, has not consented to the appointment of a new Chief Executive Officer or if during such period Mr. Musk renders services to, or invests in, any other automotive OEM other than us, Daimler has the right to terminate any or all of its strategic collaboration agreements with us. If this were to occur, our business would be harmed.
Furthermore, our DOE Loan Facility provides that we will be in default under the facility in the event Mr. Musk and certain of his affiliates fail to own, at any time prior to one year after we complete the project relating to Model S, at least 65% of the capital stock held by Mr. Musk and such affiliates as of the date of the DOE Loan Facility. Mr. Musks shares of our capital stock are held directly by his personal trust.
Many members of our management team are new to the company or to the automobile industry, and execution of our business plan and development strategy could be seriously harmed if integration of our management team into our company is not successful.
Our business could be seriously harmed if integration of our management team into our company is not successful. We expect that it will take time for our new management team to integrate into our company and it is too early to predict whether this integration will be successful. We have recently experienced significant changes in our management team and expect to continue to experience significant growth in our management team. Our senior management team has only limited experience working together as a group. Specifically, three of the six members of our senior management team have joined us within the last few years. For example, Gilbert Passin, our Vice President of Manufacturing, joined us in January 2010, George Blankenship, our Vice President of Sales and Ownership Experience, joined us in July 2010, and Eric Whitaker, our General Counsel, joined us in October 2010. This lack of long-term experience working together may impact the teams ability to collectively quickly and efficiently respond to problems and effectively manage our business. Although we are taking steps to add senior management personnel that have significant automotive experience, many of the members of our current senior management team have limited or no prior experience in the automobile or electric vehicle industries.
We are subject to various environmental and safety laws and regulations that could impose substantial costs upon us and cause delays in building our manufacturing facilities.
As an automobile manufacturer, we and our operations, both in the United States and abroad, are subject to national, state, provincial and/or local environmental, health and safety laws and regulations, including laws relating to the use, handling, storage, disposal and human exposure to hazardous materials. Environmental and health and safety laws and regulations can be complex, and we expect that our business and operations will be affected by future amendments to such laws or other new environmental and health and safety laws which may require us to change our operations, potentially resulting in a material adverse effect on our business. These laws can give rise to liability for administrative oversight costs, cleanup costs, property damage, bodily injury and fines and penalties. Capital and operating expenses needed to comply with environmental, health and safety laws and regulations can be significant, and violations may result in substantial fines and penalties, third party damages, suspension of production or a cessation of our operations.
Contamination at properties formerly owned or operated by us, as well as at properties we will own and operate, and properties to which hazardous substances were sent by us, may result in liability for us under environmental laws and regulations, including, but not limited to the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), which can impose liability for the full amount of remediation-related costs without regard to fault, for the investigation and cleanup of contaminated soil and ground water, for building contamination and impacts to human health and for damages to natural resources. The costs of complying with environmental laws and regulations and any claims concerning noncompliance, or liability with respect to contamination in the future, could have a material adverse effect on our financial condition or
56
operating results. We may face unexpected delays in obtaining the necessary permits and approvals required by environmental laws in connection with our manufacturing facilities that could require significant time and financial resources and delay our ability to operate these facilities, which would adversely impact our business prospects and operating results.
New United Motor Manufacturing, Inc. (NUMMI) has previously identified environmental conditions at our Tesla Factory which affect soil and groundwater, and has undertaken efforts to address these conditions. Although we have been advised by NUMMI that it has documented and managed the environmental issues at the Fremont site, we cannot currently determine with certainty the total potential costs to remediate pre-existing contamination, and we may be exposed to material liability as a result of the existence of any environmental contamination at the Fremont site.
As the owner of the Fremont site, we may be responsible under federal and state laws and regulations for the entire investigation and remediation of any environmental contamination at the Fremont site, whether it occurred before or after the date we purchase the property. We have reached an agreement with NUMMI under which, over a ten year period, we will pay the first $15.0 million of any costs of any governmentally-required remediation activities for contamination that existed prior to the closing of the purchase for any known or unknown environmental conditions (Remediation Activities), and NUMMI has agreed to pay the next $15.0 million for such Remediation Activities. Our agreement provides, in part, that NUMMI will pay up to the first $15.0 million on our behalf if such expenses are incurred in the first four years of our agreement, subject to our reimbursement of such costs on the fourth anniversary date of the closing.
On the ten-year anniversary of the closing or whenever $30.0 million has been spent on the Remediation Activities, whichever comes first, NUMMIs liability to us with respect to Remediation Activities ceases, and we are responsible for any and all environmental conditions at the Fremont site. At that point in time, we have agreed to indemnify, defend, and hold harmless NUMMI from all liability, including attorney fees, or any costs or penalties it may incur arising out of or in connection with any claim relating to environmental conditions and we have released NUMMI for any known or unknown claims except for NUMMIs obligations for representations and warranties under the agreement. As of December 31, 2011, we have accrued $5.3 million related to these environmental liabilities.
There are no assurances that NUMMI will perform its obligations under our agreement and NUMMIs failure to perform would require us to undertake these obligations at a potentially significant cost and risk to our ability to build, equip, and operate our Tesla Factory. Any Remediation Activities or other environmental conditions at the Fremont site could harm our operations and the future use and value of the Fremont site and could delay our production plans for Model S.
Our business may be adversely affected by union activities.
Although none of our employees are currently represented by a labor union, it is common throughout the automobile industry generally for many employees at automobile companies to belong to a union, which can result in higher employee costs and increased risk of work stoppages. Our employees may join or seek recognition to form a labor union, or we may be required to become a union signatory. We recently purchased an existing automobile production facility in Fremont, California from NUMMI and we plan to produce our Model S at such facility. Prior employees of NUMMI were union members and our future work force at this facility may be inclined to vote in favor of forming a labor union. We are also directly or indirectly dependent upon companies with unionized work forces, such as parts suppliers and trucking and freight companies, and work stoppages or strikes organized by such unions could have a material adverse impact on our business, financial condition or operating results. If a work stoppage occurs, it could delay the manufacture and sale of our performance electric vehicles and have a material adverse effect on our business, prospects, operating results or financial condition. The mere fact that our labor force could be unionized may harm our reputation in the eyes of some investors and thereby negatively affect our stock price. Additionally, the unionization of our labor force
57
could increase our employee costs and decrease our profitability, both of which could adversely affect our business, prospects, financial condition and results of operations.
We are subject to substantial regulation, which is evolving, and unfavorable changes or failure by us to comply with these regulations could substantially harm our business and operating results.
Our performance electric vehicles, the sale of motor vehicles in general and the electronic components used in our vehicles are subject to substantial regulation under international, federal, state, and local laws. We have incurred, and expect to incur in the future, significant costs in complying with these regulations. For example, the Clean Air Act requires that we obtain a Certificate of Conformity issued by the EPA and a California Executive Order issued by the CARB with respect to emissions for our vehicles. We received a Certificate of Conformity for sales of our Tesla Roadsters in 2008 and 2010, but did not receive a Certificate of Conformity for sales of the Tesla Roadster in 2009 until December 21, 2009. In January 2010, we and the EPA entered into an Administrative Settlement Agreement and Audit Policy Determination in which we agreed to pay a civil administrative penalty in the sum of $275,000 for failing to obtain a Certificate of Conformity for sales of our vehicles in 2009 prior to December 21, 2009.
Regulations related to the electric vehicle industry and alternative energy are currently evolving and we face risks associated with changes to these regulations such as:
| the imposition of a carbon tax or the introduction of a cap-and-trade system on electric utilities could increase the cost of electricity; |
| changes to the regulations governing the assembly and transportation of lithium-ion battery packs, such as the UN Recommendations of the Safe Transport of Dangerous Goods Model Regulations or regulations adopted by the U.S. Pipeline and Hazardous Materials Safety Administration (PHMSA) could increase the cost of lithium-ion battery packs; |
| the amendment or rescission of the federal law and regulations mandating increased fuel economy in the United States, referred to as the Corporate Average Fuel Economy (CAFE) standards could reduce new business opportunities for our powertrain sales and development activities; |
| amendment or rescission of federal greenhouse gas tailpipe emission regulations administered by EPA under the authority of the Clean Air Act could reduce new business opportunities for our powertrain sales and development activities; |
| increased sensitivity by regulators to the needs of established automobile manufacturers with large employment bases, high fixed costs and business models based on the internal combustion engine could lead them to pass regulations that could reduce the compliance costs of such established manufacturers or mitigate the effects of government efforts to promote alternative fuel vehicles; and |
| changes to regulations governing exporting of our products could increase our costs incurred to deliver products outside the United States or force us to charge a higher price for our vehicles in such jurisdictions. |
In addition, as the automotive industry moves towards greater use of electronics for vehicle systems, NHTSA and other regulatory bodies may in the future increase regulation for these electronic systems.
To the extent the laws change, some or all of our vehicles may not comply with applicable international, federal, state or local laws, which would have an adverse effect on our business. Compliance with changing regulations could be burdensome, time consuming, and expensive. To the extent compliance with new regulations is cost prohibitive, our business, prospects, financial condition and operating results will be adversely affected.
58
We retain certain personal information about our customers and may be subject to various privacy and consumer protection laws.
We use our vehicles electronic systems to log information about each vehicles use in order to aid us in vehicle diagnostics, repair and maintenance, as well as to help us collect data regarding our customers charge time, battery usage, mileage and efficiency habits. Our customers may object to the use of this data, which may harm our business. Possession and use of our customers personal information in conducting our business may subject us to federal and/or state legislative and regulatory burdens in the United States and foreign jurisdictions that could require notification of data breach, restrict our use of such personal information and hinder our ability to acquire new customers or market to existing customers. For example, we are subject to local data protection laws in Europe. We may incur significant expenses to comply with privacy, consumer protection and security standards and protocols imposed by law, regulation, industry standards or contractual obligations. If third parties improperly obtain and use the personal information of our customers, we may be required to expend significant resources to resolve these problems. A major breach of our network security and systems could have serious negative consequences for our businesses and future prospects, including possible fines, penalties and damages, reduced customer demand for our vehicles, and harm to our reputation and brand.
We may become subject to product liability claims, which could harm our financial condition and liquidity if we are not able to successfully defend or insure against such claims.
We may become subject to product liability claims, which could harm our business, prospects, operating results and financial condition. The automobile industry experiences significant product liability claims and we face inherent risk of exposure to claims in the event our vehicles do not perform as expected or malfunction resulting in personal injury or death. Our risks in this area are particularly pronounced given the limited number of vehicles delivered to date and limited field experience of those vehicles. A successful product liability claim against us could require us to pay a substantial monetary award. Moreover, a product liability claim could generate substantial negative publicity about our vehicles and business and inhibit or prevent commercialization of other future vehicle candidates which would have material adverse effect on our brand, business, prospects and operating results. We self insure against the risk of product liability claims. Any lawsuit seeking significant monetary damages may have a material adverse effect on our reputation, business and financial condition. We may not be able to secure additional product liability insurance coverage on commercially acceptable terms or at reasonable costs when needed, particularly if we do face liability for our products and are forced to make a claim under our policy.
In connection with the development and sale of our Model S, Model X, and our future electric vehicles, we will need to comply with various additional safety regulations and requirements that were not applicable to the sales of our Tesla Roadsters, with which it may be expensive or difficult to comply. For example, we will need to pass a range of impact tests for Model S. We performed similar tests on the Tesla Roadster based on European Union testing standards in connection with sales exceeding certain volume thresholds in Australia and Japan, and two criteria were not met in the test. We may experience difficulties in meeting all the criteria for these or similar tests for our Model S and Model X, which may delay our ability to sell Model S and Model X in high volumes in certain jurisdictions.
We may be compelled to undertake product recalls, which could adversely affect our brand image and financial performance.
Any product recall in the future may result in adverse publicity, damage our brand and adversely affect our business, prospects, operating results and financial condition. We previously experienced product recalls in May 2009 and October 2010, both of which were unrelated to our electric powertrain. In April 2009, we determined that a condition caused by insufficient torquing of the rear inner hub flange bolt existed in some of our Tesla Roadsters, as a result of a missed process during manufacture of the Tesla Roadster glider. In October 2010, we initiated a product recall after the 12 volt, low voltage auxiliary cable in a single vehicle chafed against the edge
59
of a carbon fiber panel in the vehicle causing a short, smoke and possible fire behind the right front headlamp of the vehicle. In the future, we may at various times, voluntarily or involuntarily, initiate a recall if any of our vehicles, including our Model S, or electric powertrain components prove to be defective or noncompliant with applicable federal motor vehicle safety standards. Such recalls, voluntary or involuntary, involve significant expense and diversion of management attention and other resources, which could adversely affect our brand image in our target markets and could adversely affect our business, prospects, financial condition and results of operations.
Our current and future warranty reserves may be insufficient to cover future warranty claims which could adversely affect our financial performance.
If our warranty reserves are inadequate to cover future warranty claims on our vehicles, our business, prospects, financial condition and operating results could be materially and adversely affected. We provide a three year or 36,000 miles New Vehicle Limited Warranty with every Tesla Roadster, which we extended to four years or 50,000 miles for the purchasers of our 2008 Tesla Roadster. In addition, customers have the opportunity to purchase an Extended Service Plan for the period after the end of the New Vehicle Limited Warranty to cover additional services for an additional three years or 36,000 miles, whichever comes first. The New Vehicle Limited Warranty is similar to other vehicle manufacturers warranty programs and is intended to cover all parts and labor to repair defects in material or workmanship in the body, chassis, suspension, interior, electronic systems, battery pack, powertrain and brake system. We record and adjust warranty reserves based on changes in estimated costs and actual warranty costs. However, because we only began delivering our first Tesla Roadster in early 2008, we have extremely limited operating experience with our vehicles, and therefore little experience with warranty claims for these vehicles or with estimating warranty reserves. Furthermore, reserves that we anticipate recording when we commence delivering Model S may be insufficient to cover any future warranty claims.
Since we began initiating sales of our vehicles, we have continued to increase our warranty reserves based on our actual warranty claim experience and we may be required to undertake further such increases in the future. As of December 31, 2011, we had warranty reserves of $6.3 million, and such reserve amount will increase in the future as Model S is sold. We could in the future become subject to a significant and unexpected warranty expense. There can be no assurances that our currently existing or future warranty reserves will be sufficient to cover all claims or that our limited experience with warranty claims will adequately address the needs of our customers to their satisfaction.
We may need to defend ourselves against patent or trademark infringement claims, which may be time-consuming and would cause us to incur substantial costs.
Companies, organizations or individuals, including our competitors, may hold or obtain patents, trademarks or other proprietary rights that would prevent, limit or interfere with our ability to make, use, develop or sell our vehicles or components, which could make it more difficult for us to operate our business. From time to time, we may receive inquiries from holders of patents or trademarks inquiring whether we infringe their proprietary rights. Companies holding patents or other intellectual property rights relating to battery packs, electric motors or electronic power management systems may bring suits alleging infringement of such rights or otherwise asserting their rights and seeking licenses. In addition, if we are determined to have infringed upon a third partys intellectual property rights, we may be required to do one or more of the following:
| cease selling, incorporating or using vehicles that incorporate the challenged intellectual property; |
| pay substantial damages; |
| obtain a license from the holder of the infringed intellectual property right, which license may not be available on reasonable terms or at all; or |
| redesign our vehicles. |
60
In the event of a successful claim of infringement against us and our failure or inability to obtain a license to the infringed technology, our business, prospects, operating results and financial condition could be materially adversely affected. In addition, any litigation or claims, whether or not valid, could result in substantial costs and diversion of resources and management attention.
We also license patents and other intellectual property from third parties, and we may face claims that our use of this in-licensed technology infringes the rights of others. In that case, we may seek indemnification from our licensors under our license contracts with them. However, our rights to indemnification may be unavailable or insufficient to cover our costs and losses, depending on our use of the technology, whether we choose to retain control over conduct of the litigation, and other factors.
Our business will be adversely affected if we are unable to protect our intellectual property rights from unauthorized use or infringement by third parties.
Any failure to protect our proprietary rights adequately could result in our competitors offering similar products, potentially resulting in the loss of some of our competitive advantage and a decrease in our revenue which would adversely affect our business, prospects, financial condition and operating results. Our success depends, at least in part, on our ability to protect our core technology and intellectual property. To accomplish this, we rely on a combination of patents, patent applications, trade secrets, including know-how, employee and third party nondisclosure agreements, copyright laws, trademarks, intellectual property licenses and other contractual rights to establish and protect our proprietary rights in our technology. We have also received from third parties patent licenses related to manufacturing our vehicles.
The protection provided by the patent laws is and will be important to our future opportunities. However, such patents and agreements and various other measures we take to protect our intellectual property from use by others may not be effective for various reasons, including the following:
| our pending patent applications may not result in the issuance of patents; |
| our patents, if issued, may not be broad enough to protect our proprietary rights; |
| the patents we have been granted may be challenged, invalidated or circumvented because of the pre-existence of similar patented or unpatented intellectual property rights or for other reasons; |
| the costs associated with enforcing patents, confidentiality and invention agreements or other intellectual property rights may make aggressive enforcement impracticable; |
| current and future competitors may independently develop similar technology, duplicate our vehicles or design new vehicles in a way that circumvents our patents; and |
| our in-licensed patents may be invalidated or the holders of these patents may seek to breach our license arrangements. |
Existing trademark and trade secret laws and confidentiality agreements afford only limited protection. In addition, the laws of some foreign countries do not protect our proprietary rights to the same extent as do the laws of the United States, and policing the unauthorized use of our intellectual property is difficult.
Our patent applications may not result in issued patents, which may have a material adverse effect on our ability to prevent others from commercially exploiting products similar to ours.
We cannot be certain that we are the first creator of inventions covered by pending patent applications or the first to file patent applications on these inventions, nor can we be certain that our pending patent applications will result in issued patents or that any of our issued patents will afford protection against a competitor. In addition, patent applications filed in foreign countries are subject to laws, rules and procedures that differ from those of the United States, and thus we cannot be certain that foreign patent applications related to issued U.S. patents will
61
result in issued patents. Furthermore, even if these patent applications do result in issued patents, some foreign countries provide significantly less effective patent enforcement than in the United States.
The status of patents involves complex legal and factual questions and the breadth of claims allowed is uncertain. As a result, we cannot be certain that the patent applications that we file will result in patents being issued, or that our patents and any patents that may be issued to us in the near future will afford protection against competitors with similar technology. In addition, patents issued to us may be infringed upon or designed around by others and others may obtain patents that we need to license or design around, either of which would increase costs and may adversely affect our business, prospects, financial condition and operating results.
Three of our trademark applications in the European Union remain subject to three outstanding opposition proceedings.
We currently sell and market our vehicles in the European Union under the Tesla trademark. We have three trademark applications in the European Union for the Tesla trademark. These are each subject to an outstanding opposition proceeding brought by a prior owner of trademarks consisting of the word Tesla. If we cannot resolve these remaining oppositions and thereby secure registered rights in the European Union, this will reduce our ability to challenge third party users of the Tesla trademark and dilute the value of the mark as our exclusive brand name in the European Union. In addition, there is a risk that the remaining prior rights owner could in the future take action to challenge our use of the Tesla mark in the European Union. This would have a severe impact on our position in the European Union and may inhibit our ability to use the Tesla mark in the European Union. If we were prevented from using the Tesla trademark in the European Union, we would need to expend significant additional financial and marketing resources on establishing an alternative brand identity in these markets.
We may be subject to claims arising from an airplane crash in which three of our employees died.
In February 2010, three of our employees died in a crash of an airplane owned and piloted by one of our employees. The plane crashed in a neighborhood in East Palo Alto, California. The plane also clipped an electrical tower, causing a power loss and business interruption in parts of Palo Alto, including Stanford University. The cause of the accident is under investigation by the National Transportation Safety Board.
In November 2010, a case was filed against us relating to the crash in California Superior Court. In that case, plaintiffs allege claims for negligence, negligent infliction of emotional distress, trespass, and violations of federal and state aviation laws and regulations against all defendants, and seek compensation for real property damage and loss of use, as well as personal property and emotional distress/bodily injury claims. In December 2010, the plaintiffs settled claims for real property damage but retained their claims for emotional distress, bodily injury and personal property damage. We believe that these remaining claims are covered by insurance.
As a result of the accident, other claims, including but not limited to those arising from loss of or damage to personal property, business interruption losses or damage to the electrical tower and surrounding area, may be asserted against various parties including us. The time and attention of our management may also be diverted in defending such claims. We may also incur costs both in defending against any claims and for any judgments if such claims are adversely determined.
Our corporate or manufacturing facilities or operations could be damaged or adversely affected as a result of disasters or unpredictable events.
Our corporate headquarters in Palo Alto and Tesla Factory in Fremont are located in Northern California, a region known for seismic activity. If major disasters such as earthquakes, fires, floods, hurricanes, wars, terrorist attacks, computer viruses, pandemics or other events occur, or our information system or communications network breaks down or operates improperly, our headquarters and production facilities may be seriously
62
damaged, or we may have to stop or delay production and shipment of our products. In addition, our lease for our Palo Alto facility permits the landlord to terminate the lease following a casualty event if the needed repairs are in excess of certain thresholds and we do not agree to pay for any uninsured amounts. We may incur expenses relating to such damages, which could have a material adverse impact on our business, operating results and financial condition.
If our suppliers fail to use ethical business practices and comply with applicable laws and regulations, our brand image could be harmed due to negative publicity.
Our core values, which include developing the highest quality electric vehicles while operating with integrity, are an important component of our brand image, which makes our reputation particularly sensitive to allegations of unethical business practices. We do not control our independent suppliers or their business practices. Accordingly, we cannot guarantee their compliance with ethical business practices, such as environmental responsibility, fair wage practices, appropriate sourcing of raw materials, and compliance with child labor laws, among others. A lack of demonstrated compliance could lead us to seek alternative suppliers, which could increase our costs and result in delayed delivery of our products, product shortages or other disruptions of our operations.
Violation of labor or other laws by our suppliers or the divergence of an independent suppliers labor or other practices from those generally accepted as ethical in the United States or other markets in which we do business could also attract negative publicity for us and our brand. This could diminish the value of our brand image and reduce demand for our performance electric vehicles if, as a result of such violation, we were to attract negative publicity. If we, or other manufacturers in our industry, encounter similar problems in the future, it could harm our brand image, business, prospects, financial condition and operating results.
We are obligated to develop and maintain proper and effective internal control over financial reporting. We may not complete our analysis of our internal control over financial reporting in a timely manner, or these internal controls may not be determined to be effective, which may adversely affect investor confidence in our company and, as a result, the value of our common stock.
We are required, pursuant to Section 404 of the Sarbanes-Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting. This assessment includes disclosure of any material weaknesses identified by our management in our internal control over financial reporting, as well as a statement that our independent registered public accounting firm has issued an attestation report on the effectiveness of our internal control over financial reporting.
Complying with Section 404 requires a rigorous compliance program as well as adequate time and resources. We may not be able to complete our evaluation, testing and any required remediation in a timely fashion. Additionally, if we identify one or more material weaknesses in our internal control over financial reporting, we may be unable to assert that our internal controls are effective. If we are unable to assert that our internal control over financial reporting is effective, or if our independent registered public accounting firm is unable to express an opinion on the effectiveness of our internal controls, we could lose investor confidence in the accuracy and completeness of our financial reports, which would have a material adverse effect on the price of our common stock.
Risks Related to the Ownership of our Common Stock
Concentration of ownership among our existing executive officers, directors and their affiliates may prevent new investors from influencing significant corporate decisions.
As of December 31, 2011, our executive officers, directors and their affiliates beneficially own, in the aggregate, approximately 41.7% of our outstanding shares of common stock. In particular, Elon Musk, our Chief Executive Officer, Product Architect and Chairman of our Board of Directors, beneficially owned approximately
63
28.9% of our outstanding shares of common stock as of December 31, 2011. As a result, these stockholders will be able to exercise a significant level of control over all matters requiring stockholder approval, including the election of directors, amendment of our certificate of incorporation and approval of significant corporate transactions. This control could have the effect of delaying or preventing a change of control of our company or changes in management and will make the approval of certain transactions difficult or impossible without the support of these stockholders.
The trading price of our common stock is likely to continue to be volatile.
Our shares of common stock began trading on the Nasdaq Global Select Market on June 29, 2010 and therefore, the trading history for our common stock has been limited. In addition, the trading price of our common stock has been highly volatile and could continue to be subject to wide fluctuations in response to various factors, some of which are beyond our control. For example, after opening at $17.00 per share at the IPO, our common stock has experienced an intra-day trading high of $36.42 per share and a low of $14.98 per share through December 31, 2011.
In addition, the stock market in general, and the market for technology companies in particular, has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. Broad market and industry factors may seriously affect the market price of companies stock, including ours, regardless of actual operating performance. These fluctuations may be even more pronounced in the trading market for our stock during the period following this offering. In addition, in the past, following periods of volatility in the overall market and the market price of a particular companys securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our managements attention and resources.
A majority of our total outstanding shares are held by insiders and may be sold on a stock exchange in the near future. The large number of shares eligible for public sale or subject to rights requiring us to register them for public sale could depress the market price of our common stock.
The market price of our common stock could decline as a result of sales of a large number of shares of our common stock in the market in the future, and the perception that these sales could occur may also depress the market price of our common stock. Stockholders owning a majority of our total outstanding shares are entitled, under contracts providing for registration rights, to require us to register shares of our common stock owned by them for public sale in the United States, subject to the restrictions of Rule 144. In addition, we have registered shares previously issued or reserved for future issuance under our equity compensation plans and agreements, a portion of which are related to outstanding option awards. Subject to the satisfaction of applicable exercise periods and, in certain cases, lock-up agreements, the shares of common stock issued upon exercise of outstanding options will be available for immediate resale in the United States in the open market. Sales of our common stock as restrictions end or pursuant to registration rights may make it more difficult for us to sell equity securities in the future at a time and at a price that we deem appropriate. These sales also could cause our stock price to fall and make it more difficult for you to sell shares of our common stock.
Mr. Musk has borrowed funds from an affiliate of our underwriter and pledged shares of our common stock to secure this borrowing. The forced sale of these shares pursuant to a margin call could cause our stock price to decline and negatively impact our business.
Goldman Sachs Bank USA, an affiliate of Goldman, Sachs & Co., made a loan in the amount of $35 million to Elon Musk and the Elon Musk Revocable Trust dated July 22, 2003, or the Trust. Interest on the loan accrues at market rates. Goldman Sachs Bank USA received customary fees and expense reimbursements in connection with this loan. Goldman Sachs Bank USA made additional extensions of credit in an aggregate amount of $50 million to Elon Musk and the Trust and Mr. Musk used a portion of the proceeds of such loans to purchase shares
64
in the June 2011 private placement. Interest on the loans will accrue at market rates. Goldman Sachs Bank USA will receive customary fees and expense reimbursements in connection with these loans. As a regulated entity, Goldman Sachs Bank USA makes decisions regarding making and managing its loans independent of Goldman, Sachs & Co. Mr. Musk and Goldman have a long-standing relationship of almost a decade. We are not a party to these loans, which are full recourse against Mr. Musk and the Trust and are secured by a pledge of a portion of the Tesla common stock currently owned by Mr. Musk and the Trust and other shares of capital stock of unrelated entities owned by Mr. Musk and the Trust. The terms of these loans were negotiated directly between Mr. Musk and Goldman Sachs Bank USA.
If the price of our common stock declines, Mr. Musk may be forced by Goldman Sachs Bank USA to provide additional collateral for the loans or to sell shares of Tesla common stock in order to remain within the margin limitations imposed under the terms of his loans. The loans between Goldman Sachs Bank USA and Mr. Musk and the Trust prohibit the non-pledged shares currently owned by Mr. Musk and the Trust from being pledged to secure other loans. In addition, our DOE Loan Facility requires Mr. Musk and certain of his affiliates, until one year after we complete the project relating to the Model S Facility, to own at least 65% of the Tesla capital stock held by them as of the date of the DOE Loan Facility, and a failure to comply would be an event of default that could result in an acceleration of all obligations under the DOE Loan Facility documents and the exercise of other remedies by the DOE. These factors may limit Mr. Musks ability to either pledge additional shares of Tesla common stock or sell shares of Tesla common stock as a means to avoid or satisfy a margin call with respect to his pledged Tesla common stock in the event of a decline in our stock price that is large enough to trigger a margin call. Any sales of common stock following a margin call that is not satisfied may cause the price of our common stock to decline further.
Anti-takeover provisions contained in our certificate of incorporation and bylaws, as well as provisions of Delaware law, could impair a takeover attempt.
Our certificate of incorporation, bylaws and Delaware law contain provisions which could have the effect of rendering more difficult, delaying or preventing an acquisition deemed undesirable by our board of directors. Our corporate governance documents include provisions:
| creating a classified board of directors whose members serve staggered three-year terms; |
| authorizing blank check preferred stock, which could be issued by the board without stockholder approval and may contain voting, liquidation, dividend and other rights superior to our common stock; |
| limiting the liability of, and providing indemnification to, our directors and officers; |
| limiting the ability of our stockholders to call and bring business before special meetings; |
| requiring advance notice of stockholder proposals for business to be conducted at meetings of our stockholders and for nominations of candidates for election to our board of directors; |
| controlling the procedures for the conduct and scheduling of board and stockholder meetings; and |
| providing the board of directors with the express power to postpone previously scheduled annual meetings and to cancel previously scheduled special meetings. |
These provisions, alone or together, could delay or prevent hostile takeovers and changes in control or changes in our management.
As a Delaware corporation, we are also subject to provisions of Delaware law, including Section 203 of the Delaware General Corporation law, which prevents some stockholders holding more than 15% of our outstanding common stock from engaging in certain business combinations without approval of the holders of substantially all of our outstanding common stock.
65
Any provision of our certificate of incorporation or bylaws or Delaware law that has the effect of delaying or deterring a change in control could limit the opportunity for our stockholders to receive a premium for their shares of our common stock, and could also affect the price that some investors are willing to pay for our common stock.
Our current agreements with Blackstar, an affiliate of Daimler, contain certain restrictions that decrease the likelihood that potential acquirors would make a bid to acquire us.
Our financing agreements with Blackstar, an affiliate of Daimler, include certain restrictions that decrease the likelihood that potential acquirors would make a bid to acquire us, including giving Blackstar a right of notice on any acquisition proposal we receive for which we determine to engage in further discussions with a potential acquiror or otherwise pursue. Blackstar then has a right, within a specified time period, to submit a competing acquisition proposal. In addition, Elon Musk, our Chief Executive Officer, Product Architect, Chairman and largest stockholder, has agreed that he will not transfer any shares of our capital stock beneficially owned by him to any automobile original equipment manufacturer, other than Daimler, without Blackstars consent. Mr. Musk has further agreed not to vote any shares of our capital stock beneficially owned by him in favor of a deemed liquidation transaction to which any automobile original equipment manufacturer, other than Daimler, is a party without Blackstars consent. These provisions could delay or prevent hostile takeovers and changes in control of us, which could cause our stock price or trading volume to fall.
If securities or industry analysts publishing research or reports about us, our business or our market change their recommendations regarding our stock adversely or cease to publish research or reports about us, our stock price and trading volume could decline.
The trading market for our common stock will be influenced by the research and reports that industry or securities analysts may publish about us, our business, our market or our competitors. If any of the analysts who may cover us change their recommendation regarding our stock adversely, or provide more favorable relative recommendations about our competitors, our stock price would likely decline. If any analyst who may cover us were to cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline.
We do not expect to declare any dividends in the foreseeable future.
We do not anticipate declaring any cash dividends to holders of our common stock in the foreseeable future. Consequently, investors may need to rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investment. Investors seeking cash dividends should not purchase our common stock.
ITEM 1B. | UNRESOLVED STAFF COMMENTS |
None.
ITEM 2. | PROPERTIES |
Our corporate headquarters is based in Palo Alto, California. We have a lease with Stanford University for 350,000 square feet which expires in January 2020 and houses our headquarters and powertrain activities. The Palo Alto facility has served as our manufacturing facility for the electric powertrain components we utilize in the Tesla Roadster and for our powertrain component and systems development and sales. We are in the process of transitioning our powertrain component and systems production activities to the Tesla Factory.
In May 2010, we entered into an agreement to purchase an existing automobile production facility located in Fremont, California from NUMMI, which is a joint venture between Toyota, and Motors Liquidation Company,
66
the owner of selected assets of General Motors. In October 2010, we completed the purchase and received title to the facility and land. The total cash paid was $42.0 million. The purchase totaled 210 acres, or approximately 55% of the land at the site, and included all of the manufacturing facilities located thereon totaling approximately 5.4 million square feet. We intend to use the facility and manufacturing assets for the production of our Model S vehicle and to build our future vehicles. We are currently planning and building out this facility. We are required to comply with environmental regulations in connection with our Tesla Factory in Fremont, California. In October 2010, we and NUMMI amended the May 2010 purchase agreement to include the transfer to us of certain operating permits, or emission credits, for additional consideration of $6.5 million. We completed the transfer of these permits in October 2010.
Outside of our Tesla Factory, we do not currently own any of our facilities. The following table sets forth the location, approximate size and primary use of our significant leased facilities:
Location (1) |
Approximate Size (Building) in Square Feet |
Primary Use |
Lease Expiration Date | |||||
Palo Alto, California |
350,000 | Administration, engineering services and powertrain development services | January 2020 | |||||
Hawthorne, California |
132,250 | Vehicle engineering and design services | December 2022 | |||||
Maidenhead, United Kingdom |
8,870 | Administration, sales, service and marketing services | November 2015 |
(1) | We also lease a number of facilities for our retail locations around the world, most of which are 5,000 square feet or smaller. |
We currently intend to add new facilities or expand our existing facilities as we add employees and expand our production organization. We believe that suitable additional or alternative space will be available in the future on commercially reasonable terms to accommodate our foreseeable future expansion.
ITEM 3. | LEGAL PROCEEDINGS |
From time to time, we are subject to various legal proceedings that arise from the normal course of business activities. In addition, from time to time, third parties may assert intellectual property infringement claims against us in the form of letters and other forms of communication. If an unfavorable ruling were to occur, there exists the possibility of a material adverse impact on our results of operations, prospects, cash flows, financial position and brand.
67
PART II
ITEM 5. | MARKET FOR REGISTRANTS COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES |
Market Information
Our common stock has traded on The NASDAQ Global Select Market under the symbol TSLA since it began trading on June 29, 2010. Our initial public offering was priced at $17.00 per share on June 28, 2010. The following table sets forth, for the time period indicated, the high and low closing sales price of our common stock as reported on The NASDAQ Global Select Market.
2011 | 2010 | |||||||||||||||
High | Low | High | Low | |||||||||||||
First Quarter |
$ | 28.71 | $ | 21.11 | $ | | $ | | ||||||||
Second Quarter (from June 29, 2010) |
31.50 | 24.20 | 23.89 | 23.83 | ||||||||||||
Third Quarter |
30.44 | 21.50 | 21.98 | 15.80 | ||||||||||||
Fourth Quarter |
35.00 | 22.93 | 35.47 | 20.05 |
Holders
As of January 31, 2012, there were 407 holders of record of our common stock. A substantially greater number of holders of our common stock are street name or beneficial holders, whose shares are held by banks, brokers and other financial institutions.
Dividend Policy
We have never declared or paid cash dividends on our common stock. We currently do not anticipate paying any cash dividends in the foreseeable future. Any future determination to declare cash dividends will be made at the discretion of our board of directors, subject to applicable laws and compliance with certain covenants under our loan facility with the United States Department of Energy, which restrict or limit our ability to pay dividends, and will depend on our financial condition, results of operations, capital requirements, general business conditions and other factors that our board of directors may deem relevant.
68
Stock Performance Graph
This performance graph shall not be deemed filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the Exchange Act), or incorporated by reference into any filing of Tesla Motors, Inc. under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such filing.
The following graph shows a comparison from June 29, 2010 through December 31, 2011, of the cumulative total return for our common stock, the NASDAQ Composite Index, and a group of all public companies sharing the same SIC code as us which is SIC code 3711, Motor Vehicles and Passenger Car Bodies (Motor Vehicles and Passenger Car Bodies Public Company Group). Such returns are based on historical results and are not intended to suggest future performance. Data for The NASDAQ Composite Index and the Motor Vehicles and Passenger Car Bodies Public Company Group assumes an investment of $100 on June 29, 2010 and reinvestment of dividends. We have never declared or paid cash dividends on our capital stock nor do we anticipate paying any such cash dividends in the foreseeable future.
Unregistered Sales of Equity Securities
On July 2, 2010, we sold 2,941,176 shares of our common stock to Toyota Motor Corporation at a price of $17.00 per share, for aggregate proceeds of $50.0 million.
On November 2, 2010, we sold 1,418,573 shares of our common stock to an entity affiliated with Panasonic Corporation at a price of $21.148 per share, for aggregate proceeds of $30.0 million.
On June 2, 2011, we sold 1,416,000 shares of our common stock to Elon Musk, our Chief Executive Officer and cofounder, and 637,475 shares of our common stock to Blackstar Investco LLC, an affiliate of Daimler AG (Daimler) at a price of $28.76 per share, for aggregate proceeds of $59.1 million.
The shares described above were issued in private transactions pursuant to Section 4(2) of the Securities Act of 1933, as amended.
69
Use of Proceeds
Our initial public offering (IPO) of common stock was effected through a Registration Statement on Form S-1 (File No. 333-164593) which was declared effective by the Securities and Exchange Commission on June 28, 2010 which registered an aggregate of 15,295,000 shares of our common stock, including 1,995,000 shares that the underwriters had the option to purchase. On July 2, 2010, we sold 11,880,600 shares on for gross proceeds of $202.0 million. We paid the underwriters underwriting discounts and commissions of $13.1 million and incurred additional offering costs of approximately $4.4 million. After deducting the underwriting discounts and commissions and the offering costs, we received net proceeds of approximately $184.5 million. There was no material change in the use of proceeds from our IPO as described in our final prospectus filed with the SEC pursuant to Rule 424(b). From the effective date of the registration statement through December 31, 2011, we have used the net proceeds of the offering for working capital purposes, including expenditures for inventory, personnel costs, equipment and other operating expenses.
Purchases of Equity Securities by the Issuer and Affiliated Purchasers
None.
70
ITEM 6. | SELECTED FINANCIAL DATA |
The following selected consolidated financial data should be read in conjunction with Managements Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and the related notes included elsewhere in this Annual Report on Form 10-K.
The following selected consolidated financial data table also reflects the 1-for-3 reverse stock split of our outstanding common stock effected in May 2010.
Year Ended December 31, | ||||||||||||||||||||
2011 | 2010 | 2009 | 2008 | 2007 | ||||||||||||||||
(in thousands, except share and per share data) | ||||||||||||||||||||
Consolidated Statements of Operations Data: |
||||||||||||||||||||
Revenues: |
||||||||||||||||||||
Automotive sales |
$ | 148,568 | $ | 97,078 | $ | 111,943 | $ | 14,742 | $ | 73 | ||||||||||
Development services |
55,674 | 19,666 | | | | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Total revenues |
204,242 | 116,744 | 111,943 | 14,742 | 73 | |||||||||||||||
Cost of revenues (1): |
||||||||||||||||||||
Automotive sales |
115,482 | 79,982 | 102,408 | 15,883 | 9 | |||||||||||||||
Development services |
27,165 | 6,031 | | | | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Total cost of revenues |
142,647 | 86,013 | 102,408 | 15,883 | 9 | |||||||||||||||
Gross profit (loss) |
61,595 | 30,731 | 9,535 | (1,141 | ) | 64 | ||||||||||||||
Operating expenses (1): |
||||||||||||||||||||
Research and development (net of development Compensation of $23,249 for the year ended December 31, 2009) |
208,981 | 92,996 | 19,282 | 53,714 | 62,753 | |||||||||||||||
Selling, general and administrative |
104,102 | 84,573 | 42,150 | 23,649 | 17,244 | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Total operating expenses |
313,083 | 177,569 | 61,432 | 77,363 | 79,997 | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Loss from operations |
(251,488 | ) | (146,838 | ) | (51,897 | ) | (78,504 | ) | (79,933 | ) | ||||||||||
Interest income |
255 | 258 | 159 | 529 | 1,749 | |||||||||||||||
Interest expense |
(43 | ) | (992 | ) | (2,531 | ) | (3,747 | ) | | |||||||||||
Other income (expense), net (2) |
(2,646 | ) | (6,583 | ) | (1,445 | ) | (963 | ) | 137 | |||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Loss before income taxes |
(253,922 | ) | (154,155 | ) | (55,714 | ) | (82,685 | ) | (78,047 | ) | ||||||||||
Provision for income taxes |
489 | 173 | 26 | 97 | 110 | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Net loss |
$ | (254,411 | ) | $ | (154,328 | ) | $ | (55,740 | ) | $ | (82,782 | ) | $ | (78,157 | ) | |||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Net loss per share of common stock, basic and diluted (3) |
$ | (2.53 | ) | $ | (3.04 | ) | $ | (7.94 | ) | $ | (12.46 | ) | $ | (22.69 | ) | |||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Weighted average shares used in computing net loss per share of common stock, basic and diluted (3) |
100,388,815 | 50,718,302 | 7,021,963 | 6,646,387 | 3,443,806 | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
(1) | Includes stock-based compensation expense as follows: |
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Cost of sales |
$ | 670 | $ | 243 | $ | 61 | ||||||
Research and development |
13,377 | 4,139 | 376 | |||||||||
Selling, general and administrative |
15,372 | 16,774 | 997 | |||||||||
|
|
|
|
|
|
|||||||
Total |
$ | 29,419 | $ | 21,156 | $ | 1,434 | ||||||
|
|
|
|
|
|
71
(2) | In January 2010, we issued a warrant to the Department of Energy (DOE) in connection with the closing of our DOE loan facility to purchase shares of our Series E convertible preferred stock. This convertible preferred stock warrant became a warrant to purchase shares of our common stock upon the closing of our initial public offering (IPO) in July 2010. Beginning on December 15, 2018 and until December 14, 2022, the shares subject to purchase under the warrant will become exercisable in quarterly amounts depending on the average outstanding balance of our the DOE loan facility during the prior quarter. Since the number of shares of common stock ultimately issuable under the warrant will vary, this warrant will be carried at its estimated fair value with changes in the fair value of this common stock warrant liability reflected in other income (expense), net, until its expiration or vesting. Potential shares of common stock issuable upon exercise of the DOE warrant will be excluded from the calculation of diluted net loss per share of common stock until at least such time as we generate a net profit in a given period. |
(3) | Diluted net loss per share of common stock is computed excluding common stock subject to repurchase, and, if dilutive, potential shares of common stock outstanding during the period. Potential shares of common stock consist of stock options to purchase shares of our common stock and warrants to purchase shares of our convertible preferred stock (using the treasury stock method) and the conversion of our convertible preferred stock and convertible notes payable (using the if-converted method). For purposes of these calculations, potential shares of common stock have been excluded from the calculation of diluted net loss per share of common stock as their effect is antidilutive since we generated a net loss in each period. |
As of December 31, | ||||||||||||||||||||
2011 | 2010 | 2009 | 2008 | 2007 | ||||||||||||||||
Consolidated Balance Sheet Data: |
||||||||||||||||||||
Cash and cash equivalents |
$ | 255,266 | $ | 99,558 | $ | 69,627 | $ | 9,277 | $ | 17,211 | ||||||||||
Short-term marketable securities |
25,061 | | | | | |||||||||||||||
Restricted cashcurrent (1) |
23,476 | 73,597 | | | | |||||||||||||||
Property, plant and equipment, net (2) |
298,414 | 114,636 | 23,535 | 18,793 | 11,998 | |||||||||||||||
Working capital (deficit) |
181,499 | 150,321 | 43,070 | (56,508 | ) | (28,988 | ) | |||||||||||||
Total assets |
713,448 | 386,082 | 130,424 | 51,699 | 34,837 | |||||||||||||||
Convertible preferred stock warrant liability (3) |
| | 1,734 | 2,074 | 191 | |||||||||||||||
Common stock warrant liability (3) |
8,838 | 6,088 | | | | |||||||||||||||
Capital lease obligations, less current portion |
2,830 | 496 | 800 | 888 | 18 | |||||||||||||||
Long-term debt (4) |
268,335 | 71,828 | | | | |||||||||||||||
Convertible preferred stock |
| | 319,225 | 101,178 | 101,178 | |||||||||||||||
Total stockholders equity (deficit) |
224,045 | 207,048 | (253,523 | ) | (199,714 | ) | (117,846 | ) |
(1) | Upon the completion of our IPO and concurrent Toyota private placement in July 2010, we set aside $100.0 million to fund a restricted dedicated account as required under the provisions of our DOE loan facility. This dedicated account can be used by us to fund any cost overruns for our projects and is used as a mechanism to defer advances under the DOE loan facility. Depending on the timing and magnitude of our draw-downs and the funding requirements of the dedicated account, the balance of the dedicated account will fluctuate throughout the period in which we plan to make draw-downs under the DOE loan facility. Upon completion of our final advance under the DOE loan facility, the balance in the dedicated account will be fully transferred out of the dedicated account. |
(2) | In October 2010, we completed the purchase of our Tesla Factory and certain of the manufacturing assets located thereon. |
(3) | In January 2010, we issued a warrant to the DOE in connection with the closing of our DOE loan facility to purchase shares of our Series E convertible preferred stock. This convertible preferred stock warrant became a warrant to purchase shares of our common stock upon the closing of our IPO in July 2010. |
(4) | In January 2010, we closed our DOE loan facility and began making draw downs under the loan facility. |
72
ITEM 7. | MANAGEMENTS DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS |
The following discussion and analysis should be read in conjunction with our consolidated financial statements and the related notes that appear elsewhere in this Annual Report on Form 10-K.
Overview and 2011 Highlights
We design, develop, manufacture and sell high-performance fully electric vehicles and advanced electric vehicle powertrain components. We own our sales and service network, and market and sell our vehicles directly to consumers via the phone and internet, in-person at our corporate events and through our network of Tesla stores. We were incorporated in Delaware in July 2003, opened our first store in Los Angeles, California in May 2008, and introduced our first vehicle, the Tesla Roadster, in early 2008. We are targeting our second vehicle, the Model S sedan, for a significantly broader customer base than the Tesla Roadster and plan to manufacture Model S in higher volumes than those for the Tesla Roadster. First customer deliveries of Model S are planned by July 2012. We have also recently revealed an early prototype of the Model X crossover, a vehicle based on the Model S platform. This unique vehicle has been designed to fill the niche between the roominess of a minivan and the style of an SUV, while having high performance features such as a dual motor all-wheel drive system.
During the year ended December 31, 2011, we recognized total revenues of $204.2 million, an increase of 75% over total revenues of $116.7 million for the year ended December 31, 2010. Automotive sales revenue of $148.6 million increased 53% from the year ended December 31, 2010, driven by strong customer demand for the Tesla Roadster globally and significantly higher powertrain component sales. We completed 2011 with cumulative deliveries worldwide from inception of approximately 2,150 Roadsters and concluded the production run of the Tesla Roadster in January 2012. We expect to sell our remaining Tesla Roadsters primarily in Europe and Asia during 2012 until our inventory is depleted.
Development services revenue increased to $55.7 million for the year ended December 31, 2011 from $19.7 million for the year ended December 31, 2010, due primarily to our development activities for the Toyota Motor Corporation (Toyota) RAV4 EV program for a full electric powertrain system. We completed planned milestones and deliveries of samples to Toyota during the year, and we currently expect to complete our remaining development services milestones and sample deliveries during the first quarter of 2012.
We made significant progress on the Model S program this year and we remain on schedule to commence customer deliveries by July 2012. During the year, we moved from building alpha to beta prototypes and performed detailed testing of systems integration, performance and safety. Our significant efforts in development and testing, both of which are ongoing, has allowed us to further refine the overall design of Model S and its constituent parts as well as the production and assembly processes to manufacture the vehicle. In October 2011,
73
we finalized a long term supply contract with Panasonic Corporation for battery cells to be used in our products, which gives us increased visibility into our variable costs.
Research and development expenses included expenses related to Model S alpha and beta prototype build, development of the Tesla Factory, significant engineering, design and testing work being undertaken to support Model S development, design and engineering activities related to Model X, and other research and development activities. Research and development expenses for the year ended December 31, 2011 were $209.0 million, compared to $93.0 million for the year ended December 31, 2010.
In addition to Model S engineering, we also experienced significant activity at the Tesla Factory, where we intend to produce our Model S, Model X and future vehicles. Significant construction has taken place and detailed manufacturing readiness plans are being executed. Almost all of our Model S vehicle manufacturing equipment has been installed at the Tesla Factory. As part of our testing and qualifying activities of our manufacturing equipment, we are now assembling beta prototype vehicles at the Tesla Factory and expect to start building release candidate vehicles in the first quarter of 2012. During this process, we are continuing to fine-tune our production processes and incorporate a higher percentage of production-intent components into the cars. Once we complete these activities, the Tesla Factory will be fully commissioned for production and ready for its intended use. As a result of investments being made in the Tesla Factory and related supplier tooling for Model S, capital expenditures increased to $197.9 million for the year ended December 31, 2011, compared to $105.4 million for the year ended December 31, 2010. Our capital expenditures in 2010 were comprised primarily of payments we had made towards the purchase of the Tesla Factory from New United Motor Manufacturing, Inc. (NUMMI).
With the opening of our Santana Row store in 2011, we launched what we believe to be a new and unique retail experience designed to engage and inform potential customers about electric vehicles in general, learn about Teslas innovations and configure their cars through hands-on interactive screens. During the year, we further expanded our company-owned retail network with the opening of several more stores in the United States utilizing the new store concept embodied by our Santana Row Tesla store. Some of these new stores will replace existing stores which we plan to continue using as service locations. As a result of our activities to support the sales of the Tesla Roadster, the opening and operation of new stores, higher store-related and marketing activities, as well as the growth of our business in general, we incurred higher selling, general and administrative expenses of $104.1 million for the year ended December 31, 2011 when compared to expenses of $84.6 million for the year ended December 31, 2010.
In June 2011, we completed a follow-on offering of common stock in which a total of 6,095,000 shares of our common stock were sold, and received cash proceeds of $172.7 million, net of underwriting discounts. Concurrent with this offering, we also sold 1,416,000 shares of common stock to Elon Musk, our Chief Executive Officer and 637,475 shares of common stock to Blackstar Investco LLC, an affiliate of Daimler and received total cash proceeds of $59.1 million in these private placements. No underwriting discounts or commissions were paid in connection with these private placements.
Along with the proceeds from our public offerings and private placements, our continued draw-downs under the Department of Energy Loan Facility (DOE Loan Facility) and other sources of cash including cash from the sales of the Tesla Roadster, development services to Toyota, sales of powertrain components to Daimler, and cash received from refundable reservation payments for our Model S, provided the liquidity to fund our Model S, Model X and powertrain development activities, as well as our capital investments in manufacturing infrastructure. During the year ended December 31, 2011, we received $204.4 million in draw-downs under the DOE Loan Facility bringing our total long-term debt under the facility to $276.3 million. As we continue to progress on our Model S and powertrain activities, we expect to continue making draw-downs under the DOE Loan Facility.
As of December 31, 2011, we had $492.7 million in principal sources of liquidity available from our cash and cash equivalents, short-term marketable securities, cash held in our dedicated DOE account and the remaining amounts available under the DOE Loan Facility. This includes our cash and cash equivalents in the
74
amount of $255.3 million which includes investments in money market funds, short-term marketable securities of $25.1 million, cash of $23.5 million deposited in a dedicated DOE account in accordance with the requirements of our DOE Loan Facility, and $188.8 million available under the DOE Loan Facility. We expect that these principal sources of liquidity together with our current projections of cash flow from operating activities will provide us adequate liquidity until we reach profitability in 2013.
Management Opportunities, Challenges and Risks
Our principal focus has continued to be on the disciplined development of Model S so that we can commence deliveries by July 2012. We have also been focused on the continued sales of the Tesla Roadster and powertrain components, development services activities with our strategic partners, advanced engineering work on the planned Model X and pursuing new electric powertrain opportunities with automobile manufacturers.
In January 2012, we concluded the production run of our current generation Tesla Roadster. Through December 31, 2011, we had delivered approximately 2,150 Roadsters to customers. We plan to sell our remaining Tesla Roadsters during 2012 primarily in Europe and Asia until our inventory is depleted.
Powertrain component sales in 2011 were driven primarily by our deliveries to supply Daimler AG (Daimler) with battery packs and chargers for the Daimler Smart fortwo and A-Class EV programs. We completed both of these production programs as of December 31, 2011. In July 2011, we entered into a supply and services agreement with Toyota for the production of an electric powertrain system, including a battery pack, charging system, inverter, motor, gearbox and associated software, which will be integrated into the Toyota RAV4 EV. Additionally, we will provide Toyota with certain services related to the supply of these components. Pursuant to the agreement, Toyota will pay us approximately $100 million from 2012 through 2014 based on our delivery of these components for the Toyota RAV4 EV. Due to the wind down of the Daimler Smart fortwo and A-Class EV production programs at the end of 2011, we expect powertrain component sales to be limited until the planned start of production of the Toyota RAV4 EV powertrain system in the first half of 2012.
As we have a limited number of the Tesla Roadsters left for sale and as we expect powertrain component sales to decline until the start of production for the Toyota RAV4 EV program, we anticipate our automotive sales will decline, potentially significantly, just prior to the planned launch of our Model S. The launch of our Model S could be delayed for a number of reasons and any such delays may be significant and would extend the period in which we would generate limited revenues from sales of our electric vehicles and electric powertrain systems.
We completed all of our planned milestones and deliveries of samples to Toyota during 2011, and we currently expect to complete our remaining development services milestones and sample deliveries during the first quarter of 2012. As such, we expect that the remaining development services revenue under the Toyota RAV4 EV program will also be recognized in the first quarter. Since the revenue related to development services milestones are recognized when achieved while milestone costs must be expensed as incurred, our development services gross margin will reflect this favorability when we recognize our final Toyota RAV4 EV milestones in 2012. In November 2011, we received a letter of intent from Daimler for a full electric powertrain program for a vehicle in the Mercedes line and recently, we received a purchase order to begin the development work. However, we have not yet finalized with Daimler the terms for this program and may never do so. Due to timing differences that may arise between the recognition of future milestone revenue and the underlying costs of development services, the gross margin from our development services activities may vary from period to period as we have seen under our previous development services agreements including that for the Toyota RAV4 EV program.
The build of Model S beta prototypes continues to progress and we will begin building release candidate vehicles in the first quarter of 2012. We continue to work closely with suppliers to design, develop and test components that will meet our anticipated production design specifications and schedule. Ensuring that our design, engineering, operations and manufacturing engineering teams, and our suppliers, execute on all
75
significant activities will be critical to a timely launch of first customer deliveries of our Model S by July 2012. Our continuing negotiations with suppliers and the adequate maturation of our manufacturing capabilities will influence our ability to achieve the cost per unit that we are currently projecting. Our plan to commence deliveries of Model S by July 2012 is also dependent upon the timely availability of funds from the DOE Loan Facility, upon our finalizing the related design, engineering, component procurement, testing, build out and manufacturing plans in a timely manner and upon our ability to execute these plans within the current timeline.
In February 2012, we revealed an early prototype of the Model X crossover as the first vehicle we intend to develop by leveraging the Model S platform. This unique vehicle has been designed to fill the niche between the roominess of a minivan and the style of an SUV, while having high performance features such as a dual motor all-wheel drive system. We currently plan to start production of Model X in the fourth quarter of 2013 with significant deliveries in 2014. Our ability to develop and introduce the Model X in this timeframe is based on our expectations of leveraging the Model S platform. Additionally, if there is a lower level of commonality between Model S and Model X than anticipated, our future development and tooling costs may exceed expectations.
Our operating expenses in 2011 have been significant as we continued to execute on the Model S program and are systematically and strategically expanding our sales and service infrastructure globally to support the launch of Model S. As we continue to make significant investments in research and development and our infrastructure to launch Model S as well as incur costs for the development of Model X, we expect to continue generating a net loss until we reach planned volume sales of Model S in 2013. As pre-production expenses and development and prototyping costs cannot be capitalized, we expect our operating expenses to continue increasing due to our ongoing activities to prepare the Tesla Factory for production, refine Model S through our engineering and testing on beta prototype and release candidate vehicles, and continue the advanced engineering work on Model X. Once we start recognizing revenue from the sales of Model S, our Model S production costs, including direct parts, material and labor costs, manufacturing overhead and amortized tooling, and logistics, will begin to be reflected in cost of automotive sales.
Capital spending for the Model S program will continue into 2012 as we complete our commissioning activities of the Tesla Factory and as we make final payments for tooling and manufacturing equipment required for production. Depreciation of our capital expenditures related to the manufacturing of Model S will begin with the start of Model S production. We anticipate that most of the capital expenditures on Model S will continue to be funded by the DOE Loan Facility until the launch of Model S. We also anticipate our aggregate capital expenditures for 2012 to be comparable to that in 2011, primarily focused on vehicle development and manufacturing activities for Model S and Model X.
Critical Accounting Policies and Estimates
Our consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, costs and expenses and related disclosures. We base our estimates on historical experience, as appropriate, and on various other assumptions that we believe to be reasonable under the circumstances. Changes in the accounting estimates are reasonably likely to occur from period to period. Accordingly, actual results could differ significantly from the estimates made by our management. We evaluate our estimates and assumptions on an ongoing basis. To the extent that there are material differences between these estimates and actual results, our future financial statement presentation, financial condition, results of operations and cash flows will be affected. We believe that the following critical accounting policies involve a greater degree of judgment and complexity than our other accounting policies. Accordingly, these are the policies we believe are the most critical to understanding and evaluating our consolidated financial condition and results of operations.
76
Revenue Recognition
Automotive Sales
We recognize automotive sales revenue from sales of the Tesla Roadster, including vehicle options, accessories and destination charges, vehicle service and sales of zero emission vehicle, or ZEV credits. We also recognize automotive sales revenue from the sales of electric vehicle powertrain components, such as battery packs and battery chargers, to other manufacturers. We recognize revenue when (i) persuasive evidence of an arrangement exists; (ii) delivery has occurred and there are no uncertainties regarding customer acceptance; (iii) fees are fixed or determinable; and (iv) collection is reasonably assured.
Automotive sales consist primarily of revenue earned from the sale of vehicles. Sales or other amounts collected in advance of meeting all of the revenue recognition criteria are not recognized in the consolidated statements of operations and are instead recorded as deferred revenue on our consolidated balance sheets. Prior to February 2010, we did not provide direct financing for the purchase of the Tesla Roadster although a third-party lender has provided financing arrangements to our customers in the United States. Under these arrangements we have been paid in full by the customer at the time of purchase. Starting in February 2010, we began offering a leasing program to qualified customers in the United States.
Automotive sales also consist of revenue earned from the sales of vehicle options, accessories and destination charges. While these sales may take place separately from a vehicle sale, they are often part of one vehicle sale agreement resulting in multiple element arrangements. Contract interpretation is sometimes required to determine the appropriate accounting for recognition of our revenue, including whether the deliverables specified in the multiple element arrangement should be treated as separate units of accounting, and, if so, how the price should be allocated among the elements, when to recognize revenue for each element, and the period over which revenue should be recognized. We are also required to evaluate whether a delivered item has value on a stand-alone basis prior to delivery of the remaining items by determining whether we have made separate sales of such items or whether the undelivered items are essential to the functionality of the delivered items. Further, we assess whether we know the fair value of the undelivered items, determined by reference to stand-alone sales of such items.
To date, we have been able to establish the fair value for each of the deliverables within the multiple element arrangements because we sell each of the vehicles, vehicle accessories and options separately, outside of any multiple element arrangements. As each of these items has stand alone value to the customer, revenue from sales of vehicle accessories and options are recognized when those specific items are delivered to the customer. Increased complexity to our sales agreements or changes in our judgments and estimates regarding application of these revenue recognition guidelines could result in a change in the timing or amount of revenue recognized in future periods.
Effective January 1, 2011, we adopted amended accounting standards issued by the Financial Accounting Standards Board (FASB) for multiple deliverable revenue arrangements on a prospective basis for applicable transactions originating or materially modified after January 1, 2011. The new standard changes the requirements for establishing separate units of accounting in a multiple element arrangement and requires the allocation of arrangement consideration to each deliverable to be based on the relative selling price. For fiscal 2011 and future periods, when a sales arrangement contains multiple elements, we allocate revenue to each element based on a selling price hierarchy. The selling price for a deliverable is based on its vendor specific objective evidence (VSOE) if available, third party evidence (TPE) if VSOE is not available, or estimated selling price if neither VSOE nor TPE is available. To date, we have been able to establish the fair value for each of the deliverables within the multiple element arrangements because we sell each of the vehicles, vehicles accessories and options separately, outside of any multiple element arrangements. Therefore, there were no material differences between total revenue reported and pro forma total revenues that would have been reported during the year ended December 31, 2011, if the transactions entered into or materially modified after January 1, 2011 were subject to previous accounting guidance.
77
Development Services
Revenue from development services arrangements consist of revenue earned from the development of electric vehicle powertrain components for other automobile manufacturers, including the design and development of battery packs, chargers and sample vehicles to meet a customers specifications. Beginning in the quarter ended March 31, 2010, we started entering into such contracts with the expectation that our development services would constitute a viable revenue-generating activity. Revenue is recognized as a development arrangement is finalized, the performance requirements of each development arrangement are met and collection is reasonably assured. Where development arrangements include substantive at-risk milestones, revenue is recognized based upon the achievement of the contractually-defined milestones. Amounts collected in advance of meeting all of the revenue recognition criteria are not recognized in the consolidated statement of operations and are instead recorded as deferred revenue on the consolidated balance sheet. Increased complexity to our development agreements or changes in our judgments and estimates regarding application of these revenue recognition guidelines could result in a change in the timing or amount of revenue recognized in future periods.
Costs of development services are expensed as incurred. Costs of development services incurred in periods prior to the finalization of an agreement are recorded as research and development expenses; once an agreement is finalized, these costs are recorded in cost of development services.
Prior to 2010, compensation from the Smart fortwo EV development arrangement with Daimler, which is discussed below under Development Compensation, was recorded as an offset to research and development expenses. This early arrangement was motivated primarily by the opportunity to engage Daimler and at the same time, jointly progress our own research and development activities with the associated development compensation.
Development Compensation
We began receiving payments under the Smart fortwo EV development arrangement with Daimler in the year ended December 31, 2008 to compensate us for the cost of our development activities. We deferred recognition for these payments received in advance of the execution of the final agreement because a number of significant contractual terms were not in place prior to that time. Upon entering into the final agreement in May 2009, we began recognizing the deferred development compensation as an offset to our research and development expenses on a straight-line basis. This amount was recognized over the expected life of the agreement, beginning in May 2009 and continuing through November 2009. Payments that we received upon the achievement of development milestones subsequent to contract execution in May 2009 were recognized upon achievement and acceptance of the respective milestones. All amounts received under this development agreement have been recognized as an offset to our research and development expenses in the consolidated statement of operations. All development activities under this agreement were completed as of December 31, 2009.
Marketable Securities
During the year ended December 31, 2011, we purchased marketable securities including commercial paper and corporate debt. All marketable securities are designated as available-for-sale and reported at estimated fair value, with unrealized gains and losses recorded in accumulated other comprehensive loss which is included within stockholders equity. Realized gains and losses on the sale of available-for-sale marketable securities are recorded in other expense, net. The cost of available-for-sale marketable securities sold is based on the specific identification method. Interest, dividends, amortization and accretion of purchase premiums and discounts on our marketable securities are included in other expense, net. Available-for-sale marketable securities with maturities greater than three months at the date of purchase and remaining maturities of one year or less are classified as short-term marketable securities. Where temporary declines in fair value exist, we have the ability and the intent to hold these securities for a period of time sufficient to allow for any anticipated recovery in fair value.
78
We regularly review all of our marketable securities for other-than-temporary declines in fair value. The review includes but is not limited to (i) the consideration of the cause of the impairment, (ii) the creditworthiness of the security issuers, (iii) the length of time a security is in an unrealized loss position, and (iv) our ability to hold the security for a period of time sufficient to allow for any anticipated recovery in fair value.
Inventory Valuation
We value our inventories at the lower of cost or market. Cost is computed using standard cost, which approximates actual cost on a first-in, first-out basis. We record inventory write-downs for estimated obsolescence or unmarketable inventories based upon assumptions about future demand forecasts. If our inventory on hand is in excess of our future demand forecast, the excess amounts are written off.
We also review inventory to determine whether its carrying value exceeds the net amount realizable upon the ultimate sale of the inventory. This requires us to determine the estimated selling price of our vehicles less the estimated cost to convert inventory on hand into a finished product.
Once inventory is written-down, a new, lower-cost basis for that inventory is established and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established cost basis. During the years ended December 31, 2011, 2010 and 2009, we recorded write-downs of $1.8 million, $1.0 million and $1.4 million, in cost of automotive sales, respectively.
The inventory amounts are based on our current estimates of demand, selling prices and production costs. Should our estimates of future selling prices or production costs change, material changes to these reserves may be required. Further, a small change in our estimates may result in a material charge to our reported financial results.
Warranties
We accrue warranty reserves at the time a vehicle or powertrain component is delivered to a customer. Warranty reserves include managements best estimate of the projected costs to repair or to replace any items under warranty, based on actual warranty experience as it becomes available and other known factors that may impact our evaluation of historical data. We review our reserves at least quarterly to ensure that our accruals are adequate in meeting expected future warranty obligations, and we will adjust our estimates as needed. Initial warranty data can be limited early in the launch of a new vehicle or powertrain component and accordingly, the adjustments that we record may be material. As of December 31, 2011 and 2010, we had $6.3 million and $5.4 million in warranty reserves, respectively. Adjustments to warranty reserves are recorded in cost of automotive sales.
It is likely that as we sell additional Tesla Roadsters and powertrain components and as we repair or replace items under warranty, we will acquire additional information on the projected costs to service work under warranty and may need to make additional adjustments. Further, a small change in our warranty estimates may result in a material charge to our reported financial results.
Valuation of Stock-Based Awards, Common Stock and Warrants
Stock-Based Compensation
We use the fair value method of accounting for our stock options granted to employees and Employee Stock Purchase Plan (ESPP) which require us to measure the cost of employee services received in exchange for the stock-based awards, based on the grant date fair value of the awards. The fair value of the awards is estimated using the Black-Scholes option-pricing model. The resulting cost is recognized over the period during which an employee is required to provide service in exchange for the awards, usually the vesting period which is generally four years for stock options and six months for the ESPP. Stock-based compensation expense is recognized on a straight-line basis, net of forfeitures.
79
The fair value of each stock-based award was estimated on the grant date for the periods below using the Black-Scholes option-pricing model with the following weighted-average assumptions.
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Risk-free interest rate: |
||||||||||||
Stock options |
2.0 | % | 2.0 | % | 2.2 | % | ||||||
ESPP |
0.2 | % | | | ||||||||
Expected term (in years): |
||||||||||||
Stock options |
6.0 | 5.3 | 4.6 | |||||||||
ESPP |
0.5 | | | |||||||||
Expected volatility: |
||||||||||||
Stock options |
70 | % | 71 | % | 64 | % | ||||||
ESPP |
59 | % | | | ||||||||
Dividend yield: |
||||||||||||
Stock options |
0.0 | % | 0.0 | % | 0.0 | % | ||||||
ESPP |
0.0 | % | | |
If in the future we determine that another method for calculating the fair value of our stock-based awards is more reasonable, or if another method for calculating the above input assumptions is prescribed by authoritative guidance, the fair value calculated for our stock-based awards could change significantly.
The Black-Scholes option-pricing model requires inputs such as the risk-free interest rate, expected term and expected volatility. Further, the forfeiture rate also affects the amount of aggregate compensation. These inputs are subjective and generally require significant judgment.
The risk-free interest rate that we use is based on the United States Treasury yield in effect at the time of grant for zero coupon United States Treasury notes with maturities approximating each grants expected life. Given our limited history with employee grants, we use the simplified method in estimating the expected term for our employee grants. The simplified method, as permitted by the SEC, is calculated as the average of the time-to-vesting and the contractual life of the options.
Our expected volatility is derived from the historical volatilities of several unrelated public companies within industries related to our business, including the automotive OEM, automotive retail, automotive parts and battery technology industries, because we have limited trading history on our common stock. When making the selections of our peer companies within industries related to our business to be used in the volatility calculation, we also considered the stage of development, size and financial leverage of potential comparable companies. Our historical volatility is weighted based on certain qualitative factors and combined to produce a single volatility factor.
We estimate our forfeiture rate based on an analysis of our actual forfeitures and will continue to evaluate the appropriateness of the forfeiture rate based on actual forfeiture experience, analysis of employee turnover behavior and other factors. Quarterly changes in the estimated forfeiture rate can have a significant effect on reported stock-based compensation expense, as the cumulative effect of adjusting the rate for all expense amortization is recognized in the period the forfeiture estimate is changed. If a revised forfeiture rate is higher than the previously estimated forfeiture rate, an adjustment is made that will result in a decrease to the stock-based compensation expense recognized in the consolidated financial statements. If a revised forfeiture rate is lower than the previously estimated forfeiture rate, an adjustment is made that will result in an increase to the stock-based compensation expense recognized in the consolidated financial statements.
As we accumulate additional employee stock-based awards data over time and as we incorporate market data related to our common stock, we may calculate significantly different volatilities, expected lives and
80
forfeiture rates, which could materially impact the valuation of our stock-based awards and the stock-based compensation expense that we will recognize in future periods. Stock-based compensation expense is recorded in our cost of revenues, research and development expenses, and selling, general and administrative expenses.
Unadjusted Error in 2009
In June 2010, we identified an error related to the understatement in stock-based compensation expense subsequent to the issuance of the consolidated financial statements for the year ended December 31, 2009.
In the fourth quarter of 2009, we granted certain stock options for which a portion of the grant was immediately vested. We erroneously accounted for the expense on a straight-line basis over the term of the award, while expense recognition should always be at least commensurate with the number of awards vesting during the period. As a result, selling, general and administrative expenses and net loss for the year ended December 31, 2009 were understated by $2.7 million. The error did not have an effect on the valuation of the stock options. As stock-based compensation expense is a non-cash item, there was no impact on net cash used in operating activities for the year ended December 31, 2009.
To correct this error, we recorded additional stock-based compensation of $2.4 million during the three months ended June 30, 2010. We considered the impact of the error on reported operating expenses and trends in operating results and determined that the impact of the error was not material to previously reported financial information as well as those related to the three months ended June 30, 2010.
Common Stock Valuation
Upon the completion of our IPO on July 2, 2010, our common stock has been valued by reference to its publicly traded price. Prior to the IPO, we historically granted stock options with exercise prices equal to the fair value of our common stock as determined at the date of grant by our Board of Directors. Because there was no public market for our common stock, our Board of Directors determined the fair value of our common stock by considering a number of objective and subjective factors, including the following:
| our sales of convertible preferred stock to unrelated third parties; |
| our operating and financial performance; |
| the lack of liquidity of our capital stock; |
| trends in our industry; |
| arms length, third-party sales of our stock; and |
| contemporaneous valuations performed by an unrelated third-party. |
81
There is inherent uncertainty in these estimates and if we had made different assumptions than those used, the amount of our stock-based compensation expense, net loss and net loss per share amounts could have been significantly different. The following table summarizes, by grant date, the number of stock options granted since January 1, 2008 through the completion of our IPO on July 2, 2010, and the associated per share exercise price, which equaled the fair value of our common stock for each of these grants.
Grant Date |
Number of Options Granted |
Exercise Price and Fair Value per Share of Common Stock |
||||||
June 4, 2008 |
762,137 | $ | 2.70 | |||||
July 8, 2008 |
278,308 | 2.70 | ||||||
September 3, 2008 |
200,155 | 2.70 | ||||||
October 29, 2008 |
205,156 | 2.70 | ||||||
March 2, 2009 |
214,813 | 2.70 | ||||||
April 13, 2009 |
1,005,837 | 2.70 | ||||||
April 22, 2009 |
105,184 | 2.70 | ||||||
August 4, 2009 |
323,063 | 2.94 | ||||||
October 21, 2009 |
590,638 | 6.15 | ||||||
December 4, 2009 |
7,977,444 | 6.63 | ||||||
December 16, 2009 |
58,995 | 6.63 | ||||||
March 3, 2010 |
402,660 | 9.96 | ||||||
April 28, 2010 |
256,320 | 13.23 | ||||||
June 12, 2010 |
1,135,710 | 14.17 |
Included in the December 4, 2009 awards, were 6,711,972 stock options granted to our Chief Executive Officer comprised of two grants. In recognition of his and our companys achievements and to create incentives for future success, the Board of Directors approved an option grant representing 4% of our fully-diluted share base prior to such grant as of December 4, 2009, or 3,355,986 stock options, with 1/4th of the shares vesting immediately, and 1/36th of the remaining shares scheduled to vest each month over three years, assuming continued employment through each vesting date. In addition, to create incentives for the attainment of clear performance objectives around a key element of our current business planthe successful launch and commercialization of Model Sthe Board of Directors approved additional options totaling an additional 4% of our fully-diluted shares prior to such grant as of December 4, 2009, with a vesting schedule based entirely on the attainment of performance objectives as follows, assuming Mr. Musks continued service to us through each vesting date:
| 1/4th of the shares subject to the option are scheduled to vest upon the successful completion of Model S Engineering Prototype; |
| 1/4th of the shares subject to the option are scheduled to vest upon the successful completion of Model S Validation Prototype; |
| 1/4th of the shares subject to the option are scheduled to vest upon the completion of the first Model S Production Vehicle; and |
| 1/4th of the shares subject to the option are scheduled to vest upon the completion of the 10,000th Model S Production Vehicle. |
If Mr. Musk does not meet one or more of the above milestones prior to the fourth anniversary of the date of grant, he will forfeit his right to the unvested portion of the grant.
Included in our June and September 2010 stock option grants were 666,300 and 20,000 stock options granted respectively, to various members of our senior management with a vesting schedule based entirely on the attainment of the same performance objectives as those outlined for Mr. Musk above.
82
Prior to our IPO which was completed on July 2, 2010, our Board of Directors performed valuations of our common stock for purposes of granting stock options in a manner consistent with the methods outlined in the American Institute of Certified Public Accountants Practice Aid, Valuation of Privately-Held-Company Equity Securities Issued as Compensation. The enterprise value input of our common stock valuations were derived either using fundamental analysis (income and market approaches) or based on a recent round of financing (option pricing approach). The income approach estimates the enterprise value of the company by discounting the expected future cash flows of the company to present value. We have applied discount rates that reflect the risks associated with our cash flow projections and have used venture capital rates of return for companies at a similar stage of development as us, as a proxy for our cost of capital. Our discounted cash flow calculations are sensitive to highly subjective assumptions that we were required to make at each valuation date relating to appropriate discount rates for various components of our business. For example, the discount rates used to value the cash flow projections from the Model S business factored in the low cost debt we expected to raise from the U.S. Department of Energy.
Valuation Date |
Range of Discount Rates |
|||
May 15, 2008 |
30.0 40.0 | % | ||
December 31, 2008 |
30.0 40.0 | % | ||
February 28, 2009 |
30.0 40.0 | % | ||
May 11, 2009 |
16.2 34.8 | % | ||
August 1, 2009 |
16.2 34.8 | % | ||
October 15, 2009 |
12.4 27.1 | % | ||
November 27, 2009 |
12.4 27.1 | % | ||
February 23, 2010 |
11.4 20.0 | % | ||
April 21, 2010 |
14.4 20.0 | % | ||
June 9, 2010 |
14.5 20.0 | % |
Our projected cash flows were primarily derived from our Tesla Roadster, Model S and powertrain revenue streams. In more recent valuations, these cash flow projections took into account the fact that we had been selling the Tesla Roadster since 2008, that we began selling powertrain components in the quarter ended December 31, 2009 and our anticipation of Model S production in mid-2012.
Under the market approach, the total enterprise value of the company was estimated by comparing our business to similar businesses whose securities are actively traded in public markets, or businesses that are involved in a public or private transaction. Prior transactions in our stock were also considered as part of the market approach methodology. We selected revenue valuation multiples derived from trading multiples of public companies that participate in the automotive OEM, automotive retail, automotive parts and battery technology industries. These valuation multiples were then applied to the equivalent financial metric of our business, giving consideration to differences between our company and similar companies for such factors as company size and growth prospects.
For those reports that relied on the fundamental analysis, we prepared a financial forecast to be used in the computation of the enterprise value for both the market approach and the income approach. The financial forecasts took into account our past experience and future expectations. The risks associated with achieving these forecasts were assessed in selecting the appropriate discount rate. As discussed below, there is inherent uncertainty in these estimates. Second, we allocated the resulting equity value among the securities that comprise our capital structure using the Option-Pricing Method. The aggregate value of the common stock derived from the Option-Pricing Method was then divided by the number of common shares outstanding to arrive at the per common share value. For those reports before our IPO that relied on the recent round of financing, we back-solved for the total equity value such that the value of the instrument sold in the recent round as calculated by the option pricing model was consistent with the observed transaction price.
83
Our Board of Directors considered the valuations derived from the approaches above, the probability and timing of completing an IPO as of those dates, as well as other qualitative factors in arriving at our common stock valuations, including the following:
| significant operating losses since inception; |
| macroeconomic uncertainty in 2008; |
| the absence of a significant IPO market throughout 2008 and continuing through the second quarter of 2009; and |
| other market developments that influence forecasted revenue. |
Our common stock valuations have required the significant use of estimates and assumptions. If different estimates and assumptions had been used, our common stock valuations could have been significantly different and related stock-based compensation expense may be materially impacted.
Warrants
We have accounted for our freestanding warrants to purchase shares of our convertible preferred stock as liabilities at fair value upon issuance. We have recorded the warrants as a liability because the underlying shares of convertible preferred stock are contingently redeemable and, therefore, may obligate us to transfer assets at some point in the future. The warrants are subject to re-measurement to fair value at each balance sheet date and any change in fair value is recognized as a component of other expense, net, on the consolidated statements of operations.
In January 2010, we issued a warrant to the DOE in connection with the closing of the DOE Loan Facility to purchase shares of our Series E convertible preferred stock at an exercise price of $2.51 per share. This convertible preferred stock warrant became a warrant to purchase shares of our common stock at an exercise price of $7.54 per share upon the closing of our IPO in July 2010. Beginning on December 15, 2018 and until December 14, 2022, the shares subject to purchase under the warrant will become exercisable in quarterly amounts depending on the average outstanding balance of the DOE Loan Facility during the prior quarter. The warrant may be exercised until December 15, 2023. If we prepay the DOE Loan Facility in part or in full, the total amount of shares exercisable under the warrant will be reduced. Since the number of shares of common stock ultimately issuable under the warrant will vary, this warrant will be carried at its estimated fair value with changes in its fair value reflected in other expense, net, until its expiration or vesting. Our ability to prepay the DOE Loan Facility and consequently, the number of shares ultimately issuable under the DOE warrant, was determined to represent an embedded derivative. This embedded derivative is inherently valued and accounted for as part of the warrant.
Since the number of shares ultimately issuable under the DOE warrants will vary depending on the average outstanding balance of the loan during the contractual vesting period, and decisions to prepay would be influenced by our future stock price as well as the interest rates on our loans in relation to market interest rates, we measured the fair value of the DOE warrant using a Monte Carlo simulation approach. The Monte Carlo approach simulates various scenarios and captures the optimal decisions to be made between prepaying the DOE loan and the cancellation of the DOE warrant over the expected term of the DOE Loan Facility of 13 years. For the purposes of the simulation, the optimal decision represents the scenario with the lowest economic cost to us. The total warrant value would then be calculated as the average warrant payoff across all simulated paths discounted to our valuation date.
The significant assumptions that we use in the valuation of the DOE warrant include similar assumptions used in the valuation of otherwise featureless stock warrants at various simulated stock prices, as well as the interest rate differential between the interest rates under our DOE Loan Facility and market interest rates for companies comparable to us. The estimated value of our stock warrant requires us to use a Black-Scholes
84
option-pricing model, which incorporates several assumptions that are subject to significant management judgment as is the case for stock-based compensation discussed above. The differential between the interest rates under our DOE Loan Facility and market interest rates is derived from the credit spread data of several unrelated public companies within industries related to our business. As the average simulated value of our stock warrant increases relative to the credit spread of our comparator companies, the fair value of our DOE warrant decreases since the economic cost of prepaying our outstanding loans under the DOE Loan Facility and replacing the funds with market interest rate debt, would be lower than the economic cost associated with the dilution caused by the vesting of warrants. Similarly, as the credit spread of our comparator companies increases relative to the average simulated value of our stock warrant, the fair value of our DOE warrant increases since the economic cost associated with prepaying our outstanding loans under the DOE Loan Facility and replacing the funds with market interest rate debt is higher than the economic cost associated with the dilution caused by the vesting of warrants, and therefore, we would not prepay our outstanding DOE debt and we would allow a higher number of warrants to vest. Prior to completion of our IPO, the fair value of the DOE warrant was included within the convertible preferred stock warrant liability on the consolidated balance sheet. Upon the completion of our IPO on July 2, 2010, this warrant was reclassified on our consolidated balance sheet from convertible preferred stock warrant liability to common stock warrant liability. The DOE warrant will continue to be recorded at its estimated fair value with changes in the fair value reflected in other expense, net, as the number of common stock ultimately issuable under the warrant is variable until its expiration or vesting. The relative movements in our stock price as compared to the credit spread of our comparator companies will result in fair value changes being recorded in other expense, net, in future periods which may be significant.
Excluding the warrant issued to the DOE in January 2010, we have estimated the fair value of our convertible preferred stock warrants at the respective balance sheet dates using a Black-Scholes option-pricing model which used several assumptions that are subject to significant management judgment as is the case for stock-based compensation as discussed above. Upon the completion of our IPO in July 2010, these convertible preferred stock warrants outstanding as of June 30, 2010, were net exercised and the related convertible preferred stock warrant liability was settled.
Income Taxes
We record our provision for income taxes in our consolidated statements of operations by estimating our taxes in each of the jurisdictions in which we operate. We estimate our actual current tax exposure together with assessing temporary differences arising from differing treatment of items recognized for financial reporting versus tax return purposes. In general, deferred tax assets represent future tax benefits to be received when certain expenses previously recognized in our consolidated statements of operations become deductible expenses under applicable income tax laws, or loss or credit carryforwards are utilized. Valuation allowances are recorded when necessary to reduce deferred tax assets to the amount expected to be realized.
Significant management judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities and any valuation allowance recorded against our net deferred tax assets. We make these estimates and judgments about our future taxable income that are based on assumptions that are consistent with our future plans. As of December 31, 2011, we had recorded a full valuation allowance on our net deferred tax assets because we expect that it is more likely than not that our deferred tax assets will not be realized in the foreseeable future. Should the actual amounts differ from our estimates, the amount of our valuation allowance could be materially impacted.
Furthermore, significant judgment is required in evaluating our tax positions. In the ordinary course of business, there are many transactions and calculations for which the ultimate tax settlement is uncertain. As a result, we recognize the effect of this uncertainty on our tax attributes based on our estimates of the eventual outcome. These effects are recognized when, despite our belief that our tax return positions are supportable, we believe that it is more likely than not that those positions may not be fully sustained upon review by tax authorities. We are required to file income tax returns in the United States and various foreign jurisdictions,
85
which requires us to interpret the applicable tax laws and regulations in effect in such jurisdictions. Such returns are subject to audit by the various federal, state and foreign taxing authorities, who may disagree with respect to our tax positions. We believe that our accounting consideration is adequate for all open audit years based on our assessment of many factors, including past experience and interpretations of tax law. We review and update our estimates in light of changing facts and circumstances, such as the closing of a tax audit, the lapse of a statute of limitations or a material change in estimate. To the extent that the final tax outcome of these matters differs from our expectations, such differences may impact income tax expense in the period in which such determination is made. The eventual impact on our income tax expense depends in part if we still have a valuation allowance recorded against our deferred tax assets in the period that such determination is made.
Recent Accounting Pronouncements
In June 2011, the FASB issued an accounting standard update, which revises the manner in which companies present comprehensive income in their financial statements. The new guidance removes the presentation options and requires entities to report components of comprehensive income in either (1) a continuous statement of comprehensive income or (2) two separate but consecutive statements. In December 2011, the FASB further amended its guidance to defer changes related to the presentation of reclassification adjustments indefinitely. The guidance (other than the portion regarding the presentation of reclassification adjustments which, as noted above, has been deferred indefinitely) is effective for fiscal years, and interim periods within those years beginning after December 15, 2011. Early adoption is permitted. We anticipate adopting the guidance in fiscal 2012. We do not expect the adoption of the guidance to have a material impact on our consolidated financial statements.
In January 2010, the FASB issued updated guidance related to fair value measurements and disclosures which requires a reporting entity to disclose separately the amounts of significant transfers in and out of Level I and Level II fair value measurements and to describe the reasons for the transfers. In addition, in the reconciliation of fair value measurements using Level III inputs, a reporting entity will be required to disclose information about purchases, sales, issuances and settlements on a gross rather than on a net basis. The updated guidance will also require fair value disclosures for each class of assets and liabilities and disclosures about the valuation techniques and inputs used to measure fair value for both recurring and non-recurring Level II and Level III fair value measurements. The adoption of this updated guidance did not have a material impact on our consolidated financial statements.
86
Results of Operations
The following table sets forth our consolidated statements of operations data for the periods presented (in thousands, except per share data):
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Revenues |
||||||||||||
Automotive sales |
$ | 148,568 | $ | 97,078 | $ | 111,943 | ||||||
Development services |
55,674 | 19,666 | | |||||||||
|
|
|
|
|
|
|||||||
Total revenues |
204,242 | 116,744 | 111,943 | |||||||||
Cost of revenues |
||||||||||||
Automotive sales |
115,482 | 79,982 | 102,408 | |||||||||
Development services |
27,165 | 6,031 | | |||||||||
|
|
|
|
|
|
|||||||
Total cost of revenues |
142,647 | 86,013 | 102,408 | |||||||||
Gross profit |
61,595 | 30,731 | 9,535 | |||||||||
Operating expenses |
||||||||||||
Research and development (net of development compensation of $23,249 for the year ended December 31, 2009) |
208,981 | 92,996 | 19,282 | |||||||||
Selling, general and administrative |
104,102 | 84,573 | 42,150 | |||||||||
|
|
|
|
|
|
|||||||
Total operating expenses |
313,083 | 177,569 | 61,432 | |||||||||
|
|
|
|
|
|
|||||||
Loss from operations |
(251,488 | ) | (146,838 | ) | (51,897 | ) | ||||||
Interest income |
255 | 258 | 159 | |||||||||
Interest expense |
(43 | ) | (992 | ) | (2,531 | ) | ||||||
Other expense, net |
(2,646 | ) | (6,583 | ) | (1,445 | ) | ||||||
|
|
|
|
|
|
|||||||
Loss before income taxes |
(253,922 | ) | (154,155 | ) | (55,714 | ) | ||||||
Provision for income taxes |
489 | 173 | 26 | |||||||||
|
|
|
|
|
|
|||||||
Net loss |
$ | (254,411 | ) | $ | (154,328 | ) | $ | (55,740 | ) | |||
|
|
|
|
|
|
Revenues
Automotive Sales
Automotive sales, which include vehicle, options and related sales, and powertrain component and related sales, consisted of the following for the periods presented (in thousands):
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Vehicle, options and related sales |
$ | 101,708 | $ | 75,459 | $ | 111,555 | ||||||
Powertrain component and related sales |
46,860 | 21,619 | 388 | |||||||||
|
|
|
|
|
|
|||||||
Total automotive sales |
$ | 148,568 | $ | 97,078 | $ | 111,943 | ||||||
|
|
|
|
|
|
Automotive sales for the year ended December 31, 2011 were $148.6 million, an increase from $97.1 million for the year ended December 31, 2010. Vehicle, options and related sales represent sales of the Tesla Roadster, including vehicle options, accessories and destination charges, vehicle service and sales of zero emission vehicle credits. Powertrain component and related sales represent the sales of electric vehicle powertrain components, such as battery packs and battery chargers, to other manufacturers.
Vehicle, options and related sales for the year ended December 31, 2011 were $101.7 million, an increase from $75.5 million for the year ended December 31, 2010. The increase in vehicle, options and related sales was primarily attributable to an increase in the number of Tesla Roadsters that we sold, particularly in North America
87
and Asia, coupled with slightly higher average selling prices. Under our supply agreement with Lotus, we have built 2,500 Roadster gliders. We plan to sell our remaining Tesla Roadsters primarily in Europe and Asia during 2012 until our inventory is depleted.
In February 2010, we began offering a leasing program to qualified customers in the United States for the Tesla Roadster. Through our wholly owned subsidiary, qualifying customers are permitted to lease the Tesla Roadster for 36 months, after which time they have the option of either returning the vehicle to us or purchasing it for a pre-determined residual value. We account for these leasing transactions as operating leases and accordingly, we recognize leasing revenues on a straight-line basis over the term of the individual leases. Lease revenues are recorded in vehicle, options and related sales within automotive sales revenue and for the years ended December 31, 2011 and 2010, we recognized $3.0 million and $0.8 million, respectively. During the years ended December 31, 2011 and 2010, approximately 6% and 14% of the vehicles delivered during those years were under operating leases. As of December 31, 2011 and 2010, we had deferred revenues of $0.8 million and $1.1 million of down payments which will be recognized over the term of the individual leases, respectively.
Powertrain component and related sales for the year ended December 31, 2011 were $46.9 million, an increase from $21.6 million for the year ended December 31, 2010. The increase in powertrain component and related sales was primarily due to significant shipments of battery packs and chargers to Daimler. We began delivering battery packs and chargers for the Daimler Smart fortwo EV program at the end of 2009, and for the Daimler A-Class EV program late in the fourth quarter of 2010. Production for both the Smart fortwo and A-Class EV programs was completed as of December 31, 2011.
Automotive sales for the year ended December 31, 2010 were $97.1 million, a decrease from $111.9 million for the year ended December 31, 2009. Vehicle, options and related sales for the year ended December 31, 2010 were $75.5 million, a decrease from $111.5 million for the year ended December 31, 2009.
During the first three quarters of 2009, we continued to fulfill reservations for the Tesla Roadster and we had made a significant effort to increase our production capacity in order to accelerate deliveries to customers who had been on our waitlist for a significant amount of time. As a result, a significant portion of the revenue recognized during the first three quarters of 2009 came from fulfilling reservations placed prior to 2009. Beginning with the fourth quarter of 2009, sales of the Tesla Roadster began more closely approximating the level of orders placed during the quarter. Consequently, the comparison of revenue for the year ended December 31, 2010 versus the year ended December 31, 2009 may not be meaningful. Similarly, ZEV credit sales which are included in vehicle, options and related sales, were higher during the year ended December 31, 2009 as the fulfillment of a significant number of reservations allowed us to sell a larger number of ZEV credits. The year over year decrease in vehicle deliveries was partially offset by higher selling prices from an expanded offering of vehicle options to our customers as well as higher average selling prices outside of the United States.
Powertrain component and related sales for the year ended December 31, 2010 were $21.6 million, compared to $0.4 million for the year ended December 31, 2009. During the year ended December 31, 2009, we were selected by Daimler to supply it with battery packs and chargers to support a trial of the Smart fortwo EV program in a least five European cities. We began delivering and recognizing revenue for these production battery packs and chargers at the end of 2009.
Prior to 2010, most of our revenues had been generated through sales of our vehicles in the United States and we had no revenues from sales outside of the United States prior to the third quarter of 2009. Our international sales commenced with the launch of the Tesla Roadster in Europe in July 2009 and since then, we have recognized revenue from sales of the Tesla Roadster in additional countries including Canada, Japan and Hong Kong. For the years ended December 31, 2011, 2010 and 2009, 49%, 55% and 19% of our revenue from vehicle, options and related sales, respectively, were derived outside of the United States. For the same periods, all of our powertrain component and related sales were derived outside of the United States.
88
Development Services
Development services represent arrangements where we develop electric vehicle powertrain components for other automobile manufacturers, including the design and development of battery packs and chargers to meet customers specifications.
Development services revenue for the year ended December 31, 2011 was $55.7 million, an increase from $19.7 million for the year ended December 31, 2010. Beginning in the first quarter of 2010, we started entering into development services arrangements with the expectation that our development services would constitute a viable revenue-generating activity. We began recognizing development services revenue during the first quarter of 2010 with the development and delivery of modular battery packs for Freightliner Custom Chassis Corporation (Freightliner), an affiliate of Daimler. These battery packs were to be used in electric delivery vans in a limited number of Freightliners customer trials. Prior to 2010, compensation that we had received from our first development arrangement with Daimler for battery packs and chargers for its Smart fortwo EV program, was recorded as an offset to research and development expenses. This early arrangement was motivated primarily by the opportunity to engage Daimler and at the same time, jointly progress our own research and development activities with the associated development compensation.
During the first quarter of 2010, Daimler also engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. We began providing development services for this program during the first quarter of 2010 and had received an aggregate of $5.5 million in payments; however, as we had not executed a final agreement related to this program as of March 31, 2010, we deferred the $5.5 million of payments that had been received from Daimler to that point. In May 2010, we executed a final agreement under which Daimler would make additional payments to us for the successful completion of certain development milestones and the delivery of prototype samples. As of December 31, 2010, we had completed our deliverables under this agreement and for the year ended December 31, 2010, we recognized $14.4 million in development services revenue.
In July 2010, we entered into an agreement with Toyota to initiate development of an electric powertrain for the Toyota RAV4 EV. Under this Phase 0 development agreement, prototypes would be made by us by combining the Toyota RAV4 model with a Tesla electric powertrain. Through June 30, 2011, we had completed all prototype vehicles under the Phase 0 agreement and for the years ended December 31, 2011 and 2010, we recognized $7.6 million and $1.3 million in development service revenue, respectively.
In October 2010, we also entered into a Phase 1 contract services agreement with Toyota for the development of a validated powertrain system, including a battery pack, power electronics module, motor, gearbox and associated software, which will be integrated into an electric vehicle version of the Toyota RAV4. Pursuant to this agreement, Toyota would pay us up to $60.0 million for the anticipated development services to be provided by us over the expected term of our performance, including a $5.0 million upfront payment that we received upon the execution of the agreement. During the year ended December 31, 2011 and 2010, we completed various milestones and delivered samples under the Phase 1 agreement. Including the amortization of our upfront payment, for the years ended December 31, 2011 and 2010, we recognized $47.4 million and $3.3 million in development services revenue, respectively, under the Phase 1 agreement. We expect that the Phase 1 agreement, and the associated development services revenues, will be completed by early 2012.
We intend to grow our development services revenue over time by establishing additional commercial arrangements with other automobile manufacturers and by looking for new development opportunities with existing strategic partners.
Additionally, we expect our development services revenue may fluctuate in future periods based on the timing of our delivery of milestones and samples, as well as the timing of meeting revenue recognition criteria.
89
Cost of Revenues and Gross Profit
Cost of revenues includes cost of automotive sales and costs related to our development services. Cost of revenues for the year ended December 31, 2011 was $142.6 million, an increase from $86.0 million for the year ended December 31, 2010. The increase in cost of automotive sales for the year ended December 31, 2011 was driven primarily by an increase in the number of vehicles that we sold and the increased shipments of battery packs and chargers to Daimler. We began delivering battery packs and chargers for the Daimler Smart fortwo EV program at the end of 2009 and for the Daimler A-Class EV program at the end of 2010. Cost of development services includes engineering support and testing, direct parts, material and labor costs, manufacturing overhead, including amortized tooling costs, shipping and logistic costs and other development expenses that we incur in the performance of our services under development agreements. The increase in cost of development services was driven primarily by our activities for the Toyota RAV4 EV program which began in the second half of 2010.
Gross profit for the year ended December 31, 2011 was $61.6 million, an increase from $30.7 million for the year ended December 31, 2010. The increase was driven primarily by higher sales of the Tesla Roadster coupled with higher average selling prices and ongoing cost improvement program on the Roadster, increased shipments of battery packs and chargers to Daimler, as well as gross profit from our development services activities which we expanded in the latter half of 2010 with the Toyota RAV4 EV program.
Cost of revenues for the year ended December 31, 2010 was $86.0 million, a decrease from $102.4 million for the year ended December 31, 2009. The decrease in cost of revenues was driven primarily by the significant number of vehicles delivered during the first three quarters of 2009 from fulfilling customer reservations placed prior to 2009. The decrease in cost of revenues from automotive sales for the year ended December 31, 2010 was partially offset by the increase in cost of revenues from our development services activities.
Cost of development services includes engineering support and testing, direct parts, material and labor costs, manufacturing overhead, including amortized tooling costs, shipping and logistic costs and other development expenses that we incur in the performance of our services under development agreements. During the quarter ended March 31, 2010, Daimler engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. As of March 31, 2010, a development agreement had yet to be finalized and as such, the related development services costs of $0.5 million that we incurred during the quarter ended March 31, 2010 were expensed in research and development. In May 2010, we finalized the agreement and began recording the costs related to this program in cost of revenues.
Gross profit for the year ended December 31, 2010 was $30.7 million, an increase from $9.5 million for the year ended December 31, 2009. The increase was driven primarily by the gross profit contributed by our development services revenues which we began to recognize in 2010; an expanded offering of vehicle options to our customers; the continued launch of the Tesla Roadster internationally, where in certain markets, we have experienced higher selling prices; and cost improvements associated with the model changeover from the Tesla Roadster to the Tesla Roadster 2 during the second half of 2009. Gross profit for the year ended December 31, 2010 was also favorably impacted by the fact that certain of the A-Class development services revenue that we recognized during the year ended December 31, 2010 did not have any corresponding cost of revenues, since these costs were recorded in research and development expenses prior to us finalizing the development agreement in May 2010.
We expect our development services revenue may fluctuate in future periods based on the timing of cash receipts as compared to the timing of meeting revenue recognition criteria. This may cause our gross profit and gross margin to be similarly impacted.
Research and Development Expenses
Research and development expenses consist primarily of personnel costs for our teams in engineering and research, supply chain, quality, manufacturing engineering and manufacturing test organizations, prototyping
90
expense, contract and professional services and amortized equipment expense. Overhead costs related to the Tesla Factory prior to the start of production of Model S are also included in research and development expenses. Also included in research and development expenses are development services costs that we incur, if any, prior to the finalization of agreements with our development services customers as reaching a final agreement and revenue recognition is not assured. Development services costs incurred after the finalization of an agreement are recorded in cost of revenues.
Research and development expenses for the year ended December 31, 2011 were $209.0 million, an increase from $93.0 million for the year ended December 31, 2010. The $116.0 million increase in research and development expenses during the year ended December 31, 2011 consisted primarily of a $38.1 million increase in materials and prototyping expenses primarily to support our Model S alpha and beta builds, overhead costs related to the Tesla Factory, powertrain development activities, a $30.9 million increase in costs related to Model S and Model X engineering, design and testing activities incurred by our suppliers, a $30.4 million increase in employee compensation expenses from higher headcount, a $9.7 million increase in stock-based compensation expense related to a larger number of outstanding equity awards and generally an increasing common stock valuation applied to new grants, and a $7.0 million increase in office, information technology and facilities-related costs to support the growth of our business.
Research and development expenses for the year ended December 31, 2010 were $93.0 million, an increase from $19.3 million for the year ended December 31, 2009. Research and development expenses during the year ended December 31, 2009 included $23.2 million in Daimler Smart fortwo EV development compensation which was recorded as an offset to research and development expenses. The $73.7 million increase in research and development expenses during the year ended December 31, 2010 consisted primarily of a $25.0 million increase in employee cash and stock-based compensation expenses primarily associated with significantly higher headcount to support our Model S and powertrain development activities, the $23.2 million Daimler development compensation offset recognized during the year ended December 31, 2009, a $10.5 million increase in materials and prototyping expenses primarily to support our Model S alpha build as well as powertrain development activities, a $10.7 million increase in professional and outside services costs related to Model S engineering, design and testing activities, and a $1.6 million increase in office, information technology and facilities-related costs to support the growth of our business, including our transition to our Palo Alto headquarters.
During the first quarter of 2010, Daimler engaged us to assist with the development and production of a battery pack and charger for a pilot fleet of its A-Class electric vehicles to be introduced in Europe during 2011. As of March 31, 2010, a development agreement had yet to be finalized and as such, the related development services costs of $0.5 million that we incurred during the quarter ended March 31, 2010 were expensed in research and development. In May 2010, we finalized the agreement and began recording the costs associated with this program in cost of revenues.
We have significantly increased our research and development efforts for Model S, which has resulted in an increase in our research and development expenses. We anticipate that our research and development expenses will rise moderately as we incur additional costs to further develop Model S, to develop Model X and to operate our Tesla Factory in Fremont, California prior to the start of Model S production.
Selling, General and Administrative Expenses
Selling, general and administrative expenses consist primarily of personnel and facilities costs related to our Tesla stores, marketing, sales, executive, finance, human resources, information technology and legal organizations, as well as litigation settlements and fees for professional and contract services.
Selling, general and administrative expenses for the year ended December 31, 2011 were $104.1 million, an increase from $84.6 million for the year ended December 31, 2010. The $19.5 million increase in our selling, general and administrative expenses during the year ended December 31, 2011 consisted primarily of a
91
$12.3 million increase in employee compensation expenses related to higher sales and marketing headcount to support sales activities worldwide and higher general and administrative headcount to support the expansion of the business, a $4.1 million increase in office, information technology and facilities-related costs to support the growth of our business, a $2.4 million increase in professional and outside services costs, and a $1.7 million increase in costs principally related to our Tesla store and gallery openings. The increase is also attributable to a $1.0 million increase in stock-based compensation expense related to a larger number of outstanding equity awards and generally an increasing common stock valuation applied to new grants. The increase for the year ended December 31, 2011 was partially offset by an additional stock-based compensation charge of $2.4 million recognized during the year ended December 31, 2010, which reflected a correction of stock-based compensation expense that should have been recorded during the year ended December 31, 2009.
Selling, general and administrative expenses for the year ended December 31, 2010 were $84.6 million, an increase from $42.2 million for the year ended December 31, 2009. The $42.4 million increase in our selling, general and administrative expenses during the year ended December 31, 2010 consisted primarily of a $15.8 million increase in stock-based compensation expense related to a larger number of outstanding equity awards, expense related to performance-based awards, an increasing common stock valuation applied to new grants made in 2010, and an additional stock-based compensation charge of $2.4 million which reflected a correction of stock-based compensation expense that should have been recorded during the year ended December 31, 2009; a $13.4 million increase in employee cash compensation expenses related to higher sales and marketing headcount to support a larger number of stores in the United States and Europe and higher general and administrative headcount to support the expansion of the business; a $7.1 million increase in office, information technology and facilities-related costs to support the growth of our business, including the opening of new stores and service locations and our transition to our Palo Alto headquarters; a $3.2 million increase in travel and expenses related to our sales and marketing activities; and a $1.0 million increase in professional services costs related to ongoing trademark and patent work, recruiting, as well as general corporate development activities.
We expect selling, general and administrative expenses to increase in future periods as we continue to grow and expand our operations, increase our sales and marketing activities to handle our expanding market presence and prepare for the planned Model S commercial launch by July 2012, and as we support the requirements of being a public company. We plan to open additional stores and service centers during 2012, mostly in the United States, and some of these stores will replace existing stores, which we may continue to use as service locations.
Interest Expense
Our interest expense is primarily due to our loans under the DOE Loan Facility which we began accessing in 2010. Although interest expense will increase as we continue to draw down on the DOE Loan Facility to fund our Model S and powertrain activities, we expect to capitalize this interest to construction in progress until the start of Model S production. During the years ended December 31, 2011 and 2010, we capitalized $5.1 million and $0.8 million, respectively, of interest expense to construction in progress.
Interest expense for the year ended December 31, 2010 was $1.0 million, a decrease from $2.5 million for the year ended December 31, 2009. Interest expense during the year ended December 31, 2009 was primarily related to our convertible notes which were converted into shares of our Series E convertible preferred stock in May 2009, while interest expense during the year ended December 31, 2010 was primarily due to our loans under the DOE Loan Facility which we began accessing in 2010.
Other Expense, Net
Other expense, net consists primarily of the change in the fair value of our warrant liabilities and transaction gains and losses on our foreign currency-denominated assets and liabilities. We expect our transaction gains and losses will vary depending upon movements in the underlying exchange rates. Income or charges resulting from
92
the change in the fair value of our convertible preferred stock warrant liability, excluding the DOE warrant liability, was eliminated after July 2, 2010, as these warrants were net exercised at the completion of our IPO. The DOE convertible preferred stock warrant which we issued in January 2010, became a common stock warrant on July 2, 2010 and is carried at its estimated fair value with changes in its fair value continuing to be reflected in other expense, net, until its expiration or vesting.
Other expense, net, for the year ended December 31, 2011 was $2.6 million, a decrease from other expense, net, of $6.6 million for the year ended December 31, 2010. The decrease in expense for the year ended December 31, 2011 was primarily due to the elimination of warrant liabilities, excluding the DOE warrant liability, upon the completion of our IPO in July 2010.
Other expense, net, for the year ended December 31, 2010 was $6.6 million, an increase in expense compared to other expense, net, of $1.4 million for the year ended December 31, 2009. The increase in expense for the year ended December 31, 2010 was primarily due to the fair value changes in our warrant liabilities as well as the liability related to common stock warrants to certain of our stockholders which we issued in May 2010, both of which increased significantly in conjunction with the increase in our common stock valuation.
Provision for Income Taxes
Our provision for income taxes for the year ended December 31, 2011 was $0.5 million, an increase from $0.2 million for the year ended December 31, 2010. The increase was due primarily to the increase in taxable income in our international jurisdictions.
Our provision for income taxes for the year ended December 31, 2010 was $0.2 million, an increase from $26,000 for the year ended December 31, 2009. The increase was due primarily to the launch of the Tesla Roadster in Europe in July 2009 and the ensuing increase in taxable income in our international jurisdictions.
Liquidity and Capital Resources
Since inception and through the year ended December 31, 2011, we had accumulated net operating losses of $669.4 million and have used $445.0 million of cash in operations. As of December 31, 2011, we had $492.7 million in principal sources of liquidity available from our cash and cash equivalents, short-term marketable securities, cash held in our dedicated DOE account and the remaining amounts available under the DOE Loan Facility. This includes our cash and cash equivalents in the amount of $255.3 million which included investments in money market funds, our short-term marketable securities in the amount of $25.1 million, cash of $23.5 million deposited in a dedicated DOE account in accordance with the requirements of our DOE Loan Facility, and approximately $188.8 million available under the DOE Loan Facility, which is primarily intended to cover spending related to the development of Model S and our powertrain activities. Other sources of cash also include cash from the sales of the Tesla Roadster, cash from the provision of development services, sales of powertrain components and refundable reservation payments for our Model S.
We expect that our current sources of liquidity, including cash, cash equivalents, short-term marketable securities, cash held in our dedicated DOE account and the remaining amounts available under the DOE Loan Facility, together with our anticipated cash from operating activities will provide us adequate liquidity until we reach profitability in 2013. This capital will fund our ongoing operations, continue research and development projects, establish sales and service centers, improve infrastructure such as expanded battery pack assembly facilities, and to make the investments in tooling and manufacturing capital required to introduce Model S and to continue development of Model X. The acceleration of the development of future vehicles, investments in new technologies, increased in-sourcing of manufacturing capabilities, investments to expand our powertrain activities or further expand our sales and service network, may require us to raise additional funds through the issuance of equity, equity-related or debt securities or through obtaining credit. We may also choose to opportunistically raise additional funds if market conditions are favorable. We cannot be certain that additional funds will be available to us on favorable terms when required, or at all.
93
DOE Loan Facility
On January 20, 2010, we entered into a loan facility with the Federal Financing Bank (FFB), and the DOE, pursuant to the Advanced Technology Vehicles Manufacturing (ATVM) Incentive Program (such loan facility, including amendments thereto, the DOE Loan Facility). Under the DOE Loan Facility, the FFB has made available to us two multi-draw term loan facilities in an aggregate principal amount of up to $465.0 million. Up to an aggregate principal amount of $101.2 million will be made available under the first term loan facility to finance up to 80% of the costs eligible for funding for the powertrain engineering and the build out of a facility to design and manufacture lithium-ion battery packs, electric motors and electric components (the Powertrain facility). Up to an aggregate principal amount of $363.9 million will be made available under the second term loan facility to finance up to 80% of the costs eligible for funding for the development of, and to build out the manufacturing facility for, our Model S sedan (the Model S facility). Under the DOE Loan Facility, we are responsible for the remaining 20% of the costs eligible for funding under the ATVM Program for the projects as well as any cost overruns for each project.
Our DOE Loan Facility draw-downs were as follows (in thousands):
Loan Facility Available for Future Draw-downs |
Interest rates | |||||||
Beginning Balance, January 20, 2010 |
$ | 465,048 | ||||||
Draw-downs received during the three months ended March 31, 2010 |
(29,920 | ) | 2.9% - 3.4 | % | ||||
Draw-downs received during the three months ended June 30, 2010 |
(15,499 | ) | 2.5% - 3.4 | % | ||||
Draw-downs received during the three months ended September 30, 2010 |
(11,138 | ) | 1.7% - 2.6 | % | ||||
Draw-downs received during the three months ended December 31, 2010 |
(15,271 | ) | 1.7% - 2.8 | % | ||||
|
|
|||||||
Remaining Balance, December 31, 2010 |
393,220 | |||||||
|
|
|||||||
Draw-downs received during the three months ended March 31, 2011 |
(30,656 | ) | 2.1% - 3.0 | % | ||||
Draw-downs received during the three months ended June 30, 2011 |
(31,693 | ) | 1.8% - 2.7 | % | ||||
Draw-downs received during the three months ended September 30, 2011 |
(90,822 | ) | 1.0% - 1.4 | % | ||||
Draw-downs received during the three months ended December 31, 2011 |
(51,252 | ) | 1.0% - 1.5 | % | ||||
|
|
|||||||
Remaining Balance, December 31, 2011 |
$ | 188,797 | ||||||
|
|
In February 2012, we received additional loans under the DOE Loan Facility of $14.4 million at interest rates ranging from 0.9% to 1.4%.
We have agreed that, in connection with the sale of our stock in any follow-on equity offering, at least 50% of the net offering proceeds will be received by us. Offering proceeds may not be used to pay bonuses or other compensation to officers, directors, employees or consultants in excess of the amounts contemplated by our business plan approved by the DOE.
Upon completion of our IPO in 2010, we set aside $100 million to fund a separate dedicated account under our DOE Loan Facility. This dedicated account is used by us to fund any cost overruns for our powertrain and Tesla Factory projects and is used as a mechanism to defer advances under the DOE Loan Facility. This will not affect our ability to draw down the full amount of the DOE loans, but will require us to use the dedicated account
94
to fund certain project costs upfront, which costs may then be reimbursed by loans under the DOE Loan Facility once the dedicated account is depleted, or as part of the final advance for the applicable project. We will be then required to deposit a portion of these reimbursements into the dedicated account, in an amount equal to up to 30% of the remaining project costs for the applicable project, and these amounts may similarly be used by us to fund project costs and cost overruns and will similarly be eligible for reimbursement by the draw-down of additional loans under the DOE Loan Facility once used in full, or as part of the final advance for the applicable project. Depending on the timing and magnitude of our draw-downs and the funding requirements of the dedicated account, the balance of the dedicated account will fluctuate throughout the period in which we plan to make draw-downs under the DOE Loan Facility. Upon completion of our final advance under the DOE Loan Facility, the balance in the dedicated account will be fully transferred out of the dedicated account. As of December 31, 2011 and 2010, $23.5 million and $73.6 million were held in the dedicated account, respectively.
For more information on the DOE Loan Facility, see Note 9 to our Consolidated Financial Statements included in this Annual Report on Form 10-K under Item 8. Financial Statements and Supplementary Data.
Initial Public Offering and Toyota Concurrent Private Placement
On June 28, 2010, our registration statement on Form S-1 relating to our IPO was declared effective by the SEC. The IPO closed on July 2, 2010, at which time we sold 11,880,600 shares of our common stock and received cash proceeds of $188.8 million from this transaction, net of underwriting discounts and commissions. Additionally, we incurred offering costs of $4.4 million related to the IPO.
Concurrent with the closing of our IPO, we sold 2,941,176 shares of our common stock to Toyota in a private placement transaction for aggregate proceeds of $50.0 million.
Panasonic Private Placement
In November 2010, we entered into a common stock purchase agreement with an entity affiliated with Panasonic Corporation (Panasonic) pursuant to which we issued and sold an aggregate of 1,418,573 shares of our common stock for aggregate proceeds of $30.0 million.
Follow-on Offering and Concurrent Private Placements
In June 2011, we completed a follow-on offering of common stock in which we sold a total of 6,095,000 shares of our common stock and received cash proceeds of $172.7 million from this transaction, net of underwriting discounts.
Concurrent with our follow-on offering, we also sold 1,416,000 shares of our common stock to Elon Musk, our Chief Executive Officer and cofounder, and 637,475 shares of our common stock to Blackstar Investco LLC, an affiliate of Daimler and received total cash proceeds of $59.1 million in the private placements. No underwriting discounts or commissions were paid in connection with these private placements.
Leasing Activities
In February 2010, we began offering a leasing program to qualified customers in the United States for the Tesla Roadster. Through our wholly owned subsidiary, qualifying customers are permitted to lease the Tesla Roadster for 36 months, after which time they have the option of either returning the vehicle to us or purchasing it for a pre-determined residual value.
When compared to our sales of vehicles, our leasing activities will spread the cash inflows that we would otherwise receive upon the sale of a vehicle, over the lease term and final disposition of the leased vehicle. As such, our cash and working capital requirements will be directly impacted and if leasing volume increases significantly, the impact may be material. However, after taking into consideration our current and planned sources of operating cash, our ability to monitor and prospectively adjust our leasing activity, as well as our intent to collect nonrefundable deposits for leased vehicles that are manufactured to specification, we do not believe that our leasing operations materially adversely impact our ability to meet our commitments and obligations as they become due. As we will also be exposed to credit risk related to the timely collection of lease payments from our customers, we intend to utilize our credit approval and ongoing review processes in order to
95
minimize any credit losses that could occur and which could adversely affect our financial condition and results of operations. We require deposits from customers electing a lease option for vehicles built to a customers specifications on the same timeframe and under the same circumstances as from customers purchasing our vehicles outright. During the years ended December 31, 2011 and 2010, approximately 6% and 14% of the vehicles delivered during these periods were under operating leases. As of December 31, 2011 and 2010, we had deferred revenues of $0.8 million and $1.1 million of down payments which will be recognized over the term of the individual leases. Through December 31, 2011, our leasing activity has not had a significant adverse impact on our liquidity.
Reservation Payments
A source of our cash flows from operations has been through our receipt of reservation payments from our customers. Reservation payments consist of reservation payments that allow potential customers to hold a reservation for the future purchase of a Tesla Roadster, Model S or Model X. For our Tesla Roadsters manufactured to specification, our current purchase agreement requires the payment of an initial nonrefundable deposit which varies based on the country of purchase. For Model S and Model X, we require an initial refundable reservation payment of at least $5,000. For Tesla Roadsters purchased directly from our showrooms, no deposit is required. Prior to the second quarter of 2010, our reservation policy was to accept reservation payments from all customers who wished to purchase a Tesla Roadster and require full payment of the purchase price of the vehicle at the time the customer selected their vehicle specifications. During the second quarter of 2010, we changed our policy to require nonrefundable deposits for Tesla Roadsters manufactured to specification at the time a customer enters into a purchase agreement. However, we also occasionally accept reservation payments for the Tesla Roadster if a customer is interested in purchasing a vehicle but not yet prepared to select the vehicle specifications. For customers who have placed a reservation payment with us, the reservation payment becomes a nonrefundable deposit once the customer has selected the vehicle specifications and enters into a purchase agreement. The full payment of the purchase price of the vehicle is required only upon delivery of the vehicle to the customer. Reservation payments for a vehicle are recorded as a current liability when received. No later than upon the delivery of a vehicle, the reservation payments collected on a customers account are applied against the total purchase price of the vehicle.
Summary of Cash Flows
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Net cash used in operating activities |
$ | (114,364 | ) | $ | (127,817 | ) | $ | (80,825 | ) | |||
Net cash used in investing activities |
(175,928 | ) | (180,297 | ) | (14,244 | ) | ||||||
Net cash provided by financing activities |
446,000 | 338,045 | 155,419 |
Cash Flows from Operating Activities
We continue to experience negative cash flows from operations as we expand our business and build our infrastructure both in the United States and internationally. Our cash flows from operating activities are significantly affected by our cash investments to support the growth of our business in areas such as research and development and selling, general and administrative. Our operating cash flows are also affected by our working capital needs to support growth and fluctuations in inventory, personnel related expenditures, accounts payable and other current assets and liabilities.
Net cash used in operating activities was $114.4 million for the year ended December 31, 2011. The largest component of our cash used during this period related to our net loss of $254.4 million, which included non-cash charges of $29.4 million related to stock-based compensation expense, $16.9 million related to depreciation and amortization and $2.8 million related to the fair value change in our warrant liability. Significant operating cash outflows were primarily related to $313.1 million of operating expenses, $142.6 million of cost of revenues and a $13.6 million increase in inventory and operating lease vehicles, partially offset by a $44.2 million increase in
96
accounts payable and accrued liabilities, and a $2.6 million increase in other long-term liabilities. Inventory increased to meet our production requirements for the Tesla Roadster as we planned for the final production of the Tesla Roadster and powertrain component sales as well as leasing activities. The increase in accounts payable and accrued liabilities was due to both the growth of our business and the timing of vendor payments.
Significant operating cash inflows during the year ended December 31, 2011 were comprised primarily of automotive sales of $148.6 million, $55.7 million of development services revenue and a $61.0 million net increase in reservation payments, partially offset by a $2.8 million increase in accounts receivable and a $1.9 million decrease in deferred revenue. The increase in accounts receivable was related primarily to receivables from Toyota for shipments of powertrain components under the Toyota RAV4 EV Phase 1 contract services agreement and shipments of battery packs and chargers to Daimler under the Daimler Smart fortwo and A-Class EV programs.
Net cash used in operating activities was $127.8 million during the year ended December 31, 2010. The largest component of our cash used during this period related to our net loss of $154.3 million, which included non-cash charges of $21.2 million related to stock-based compensation expense, $10.6 million related to depreciation and amortization and $5.0 million related to the fair value change in our warrant liabilities. Significant operating cash outflows were primarily related to $177.6 million of operating expenses, $86.0 million of cost of revenues, a $28.5 million increase in inventory and operating lease vehicles, and a $5.0 million increase in prepaid expenses and other current assets, partially offset by a $13.3 million increase in accrued liabilities and a $3.5 million increase in other long-term liabilities. Inventory increased to meet our production requirements for the Tesla Roadster and powertrain component sales while the increase in prepaid expenses and other current assets and accrued liabilities was due to both the growth of our business, as well as our increased manufacturing and Model S development activities. Operating lease vehicles increased with the introduction of our leasing program in 2010. Other long-term liabilities increased as a result of higher warranty liability from sales of the Tesla Roadster.
Significant operating cash inflows during the year ended December 31, 2010 were derived primarily from automotive sales of $97.1 million, $19.7 million of development services revenue, a $4.8 million increase in deferred revenues and a $4.7 million increase in reservation payments, partially offset by a $3.2 million increase in accounts receivable. In October 2010, we entered into a Phase 1 contract services agreement with Toyota for the development of a validated powertrain system, including a battery pack, power electronics module, motor, gearbox and associated software, to be integrated into an electric vehicle version of the Toyota RAV4. Upon execution of the agreement, we received a $5.0 million upfront payment for which revenue is being recognized over the expected term of our performance. Deferred revenues also increased from our vehicle leasing activities as lease down-payments are recognized over the term of the operating leases. The increase in accounts receivable was related primarily to powertrain component sales in relation to Daimlers Smart fortwo EV program as well as $2.3 million receivable from Toyota for the achievement of the first milestone under the Phase 1 contract services agreement. During the year ended December 31, 2010, we received $10.4 million of net new reservation payments for Model S while reservation payments for the Tesla Roadster decreased by $5.7 million.
Net cash used in operating activities was $80.8 million during the year ended December 31, 2009. The largest component of our cash used during this year was the $55.7 million net loss, which included non-cash charges of $6.9 million related to depreciation and amortization, $2.7 million related to interest on convertible notes and $1.4 million related to inventory write-downs, as well as a non-cash gain of $1.5 million from the extinguishment of convertible notes and warrants. Significant operating cash outflows were primarily related to $102.4 million of cost of revenues, $61.4 million of operating expenses, a $7.9 million increase in inventory and a $2.0 million increase in our prepaid expenses and other current assets, partially offset by a $3.4 million increase in accrued liabilities and a $0.9 million increase in accounts payable. Inventory increased to meet our production requirements while the increase in prepaid expenses and other current assets reflect a higher level of annual operating costs such as insurance, licenses and taxes from the growth of the business. The increases in accrued liabilities and accounts payable were also primarily due to the growth in our business.
97
Significant operating cash inflows during the year ended December 31, 2009 were derived primarily from the sales of the Tesla Roadster as well as development compensation related to the Daimler development agreement. Cash inflows related to automotive sales activity were $88.5 million comprised of $111.9 million of automotive sales, partially offset by a $22.0 million decrease in refundable reservation payments and a $1.5 million decrease in deferred revenues. The decrease in the refundable reservation payments was due to the launch of the Tesla Roadster during the year ended December 31, 2008. As we continued to deliver the Tesla Roadster to our customers in 2009, we applied the related reservation payments to the respective customers purchase cost. Cash inflows from the Daimler development agreement were $13.2 million comprised primarily of $23.2 million of development compensation partially offset by a $10.0 million decrease in deferred development compensation. The decrease in deferred development compensation was the result of the amortization of deferred development compensation that we received during the year ended December 31, 2008.
Cash Flows from Investing Activities
Cash flows from investing activities primarily relate to capital expenditures to support our growth in operations, including investments in Model S manufacturing, as well as restricted cash that we must maintain in relation to our DOE Loan Facility, facility lease agreements, equipment financing, and certain vendor credit policies.
Net cash used in investing activities was $175.9 million during the year ended December 31, 2011 primarily related to $197.9 million in purchases of capital equipment and $65.0 million in purchases of short-term marketable securities, partially offset by $50.1 million of net transfers out of our dedicated DOE account in accordance with the provisions of the DOE Loan Facility and $40.0 million from the maturity of short-term marketable securities. The increase in capital purchases was primarily due to significant development and construction activities at the Tesla Factory as well as purchases of Model S related manufacturing equipment and tooling.
Net cash used in investing activities was $180.3 million during the year ended December 31, 2010 primarily related to capital purchases of $105.4 million and a net increase in restricted cash of $74.9 million. The increase in capital purchases was driven primarily by $65.2 million of payments made in relation to our purchase of our Tesla Factory located in Fremont, California from NUMMI, and certain manufacturing assets located thereon to be used for our Model S manufacturing, as well as $40.2 million primarily related to other Model S capital expenditures, our transition to and build out of our powertrain manufacturing facility and corporate headquarters in Palo Alto, California, and purchases of manufacturing equipment. Our purchase transactions with NUMMI were completed in October 2010. The increase in restricted cash was primarily related to $100.0 million of net proceeds from our IPO and concurrent Toyota private placement that we transferred to a dedicated account as required by our DOE Loan Facility, partially offset by $26.4 million that was transferred out of the dedicated account during the third and fourth quarters of 2010 in accordance with the provisions of the DOE Loan Facility.
Net cash used in investing activities was $14.2 million during the year ended December 31, 2009 primarily related to capital purchases of $11.9 million and an increase in restricted cash of $2.4 million. The increase in restricted cash was primarily related to standard credit policies required by our online payment vendor and security deposits related to lease agreements and equipment financing.
Cash Flows from Financing Activities
We have financed our operations primarily with proceeds from issuances of convertible preferred stock and convertible notes, which provided us with aggregate net proceeds of $296.8 million on a cumulative basis through December 31, 2009, from loans under the DOE Loan Facility beginning in 2010, and more recently, from the net proceeds from our public offerings and private placements of common stock.
Net cash provided by financing activities was $446.0 million during the year ended December 31, 2011 and was comprised primarily of $231.5 million received from our follow-on public offering and concurrent private
98
placements completed in June 2011, $204.4 million received from our draw-downs under the DOE Loan Facility and $10.5 million received from the exercise of common stock options by employees and the purchase of common stock under our employee stock purchase plan.
Cash provided by financing activities was $338.0 million during the year ended December 31, 2010 comprised primarily of $188.8 million in proceeds from our IPO, $71.8 million we received from our loans under the DOE Loan Facility, $50.0 million in proceeds from the Toyota private placement, $30.0 million in proceeds from the Panasonic private placement, partially offset by $3.7 million of issuance costs we incurred in relation to our DOE Loan Facility and our IPO.
Cash provided by financing activities was $155.4 million during the year ended December 31, 2009 comprised primarily of $82.4 million in net proceeds from the issuance of Series E convertible preferred stock, $49.4 million in net proceeds from the issuance of Series E convertible preferred stock and $25.5 million in proceeds received from the issuance of convertible notes and warrants.
Contractual Obligations
The following table sets forth, as of December 31, 2011 certain significant cash obligations that will affect our future liquidity (in thousands):
Year Ended December 31, | ||||||||||||||||||||||||||||
Total | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 and thereafter |
||||||||||||||||||||||
Operating lease obligations |
$ | 56,768 | $ | 8,480 | $ | 8,489 | $ | 8,163 | $ | 7,330 | $ | 6,168 | $ | 18,138 | ||||||||||||||
Capital lease obligations |
4,228 | 1,416 | 1,349 | 974 | 258 | 231 | | |||||||||||||||||||||
Long-term debt |
305,461 | 13,368 | 36,676 | 36,064 | 35,460 | 34,853 | 149,040 | |||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
Total |
$ | 366,457 | $ | 23,264 | $ | 46,514 | $ | 45,201 | $ | 43,048 | $ | 41,252 | $ | 167,178 | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
In October 2010, we completed the purchase of our Tesla Factory located in Fremont, California from NUMMI. NUMMI has previously identified environmental conditions at the Fremont site which affect soil and groundwater, and is currently undertaking efforts to address these conditions. Although we have been advised by NUMMI that it has documented and managed the environmental issues, we cannot determine with certainty the potential costs to remediate any pre-existing contamination. Based on managements best estimate, we estimated the fair value of the environmental liabilities that we assumed to be $5.3 million, which is not reflected in the table above as the timing of any potential payments cannot be reasonably determined at this time. As NUMMI continues with its decommissioning activities and as we continue with our construction and operating activities, it is reasonably possible that our estimate of environmental liabilities may change materially.
We have reached an agreement with NUMMI under which, over a ten year period, we will pay the first $15.0 million of any costs of any governmentally-required remediation activities for contamination that existed prior to the completion of the facility and land purchase for any known or unknown environmental conditions, and NUMMI has agreed to pay the next $15.0 million for such remediation activities. Our agreement provides, in part, that NUMMI will pay up to the first $15.0 million on our behalf if such expenses are incurred in the first four years of our agreement, subject to our reimbursement of such costs on the fourth anniversary date of the closing.
On the ten-year anniversary of the closing or whenever $30.0 million has been spent on the remediation activities, whichever comes first, NUMMIs liability to us with respect to remediation activities ceases, and we are responsible for any and all environmental conditions at the Fremont site. At that point in time, we have agreed to indemnify, defend, and hold harmless NUMMI from all liability and we have released NUMMI for any known or unknown claims except for NUMMIs obligations for representations and warranties under the agreement.
99
As of December 31, 2011 and 2010, we held reservation payments of $91.8 million and $30.8 million from potential customers, respectively, which are not reflected in the table above. As of December 31, 2011, we held reservation payments for undelivered Model S sedans in an aggregate amount of $90.0 million and payments for Tesla Roadsters in an aggregate amount of $1.8 million. As of December 31, 2010, we held reservation payments for undelivered Model S sedans in an aggregate amount of $28.3 million and payments for Tesla Roadsters in an aggregate amount of $2.5 million. In order to convert the reservation payments into revenue, we will need to sell vehicles to these customers. All reservation payments for Model S are fully refundable until such time that a customer enters into a purchase agreement.
Off-Balance Sheet Arrangements
During the periods presented, we did not have relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.
ITEM 7A. | QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK |
Foreign Currency Risk
A portion of our revenues, costs and expenses for the years ended December 31, 2011, 2010 and 2009 were denominated in foreign currencies. This is primarily due to the contract with Lotus Cars Limited in the United Kingdom to manufacture the Tesla Roadster vehicles and gliders, and other parts sourced in Europe. Furthermore, we intend to globally procure the Model S parts, which may result in the increase of the procurement costs if the value of the U.S. dollar depreciates significantly against foreign currencies. In addition, our international sales and marketing operations incur expenses denominated in foreign currencies, principally in the British pound, the euro and the Japanese yen. These costs exposure are partially offset by our sales growth in these regions since payments for vehicles sold in these regions are denominated in the local currency. This provides a partial natural hedge to our cost exposure in Europe and Asia depending on our sales levels in these regions. Our battery cell purchases from Asian suppliers are also subject to currency risk. To date, the foreign currency effect on our consolidated financial statements has not been significant.
Interest Rate Risk
We had cash and cash equivalents and short-term marketable securities totaling $280.3 million as of December 31, 2011. A significant portion of our cash and cash equivalents were invested in money market funds. The cash and cash equivalents and short-term marketable securities are held for working capital purposes. We do not enter into investments for trading or speculative purposes. We believe that we do not have any material exposure to changes in the fair value as a result of changes in interest rates due to the short term nature of our cash equivalents and marketable securities. Declines in interest rates, however, would reduce future investment income.
As of December 31, 2011, we had $25.1 million invested in shorter-term marketable securities. If interest rates increase, the market value of our investments may decline, which could result in a realized loss if we are required to sell a security before its scheduled maturity. If overall interest rates had risen by 100 basis points, the fair value of our net investment position as of December 31, 2011 would have decreased by approximately $38,000, assuming consistent levels.
As of December 31, 2011, we have received loans under the DOE Loan Facility for an aggregate of $276.3 million with interest rates ranging from 1.0% to 3.4%. As we continue to borrow under our DOE Loan Facility, interest rates will be determined by the Secretary of the Treasury as of the date of each loan, based on the Treasury yield curve and the scheduled principal installments for such loan. We also have capital lease obligations of $3.9 million as of December 31, 2011 which are fixed rate instruments and are not subject to fluctuations in interest rates.
100
ITEM 8. | FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA |
Index to Consolidated Financial Statements
Page | ||||
102 | ||||
103 | ||||
104 | ||||
Consolidated Statements of Convertible Preferred Stock and Stockholders Equity (Deficit) |
105 | |||
106 | ||||
107 |
101
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of Tesla Motors, Inc.:
In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Tesla Motors, Inc. and its subsidiaries at December 31, 2011 and December 31, 2010, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2011 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on criteria established in Internal ControlIntegrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Companys management is responsible for these financial statements for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Managements Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, and on the Companys internal control over financial reporting based on our audits (which was an integrated audit in 2011). We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A companys internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A companys internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the companys assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ PricewaterhouseCoopers LLP
San Jose, California
February 27, 2012
102
Consolidated Balance Sheets
(in thousands, except share and per share data)
December 31, 2011 |
December 31, 2010 |
|||||||
Assets |
||||||||
Current assets |
||||||||
Cash and cash equivalents |
$ | 255,266 | $ | 99,558 | ||||
Short-term marketable securities |
25,061 | | ||||||
Restricted cash |
23,476 | 73,597 | ||||||
Accounts receivable |
9,539 | 6,710 | ||||||
Inventory |
50,082 | 45,182 | ||||||
Prepaid expenses and other current assets |
9,414 | 10,839 | ||||||
|
|
|
|
|||||
Total current assets |
372,838 | 235,886 | ||||||
|
|
|
|
|||||
Operating lease vehicles, net |
11,757 | 7,963 | ||||||
Property, plant and equipment, net |
298,414 | 114,636 | ||||||
Restricted cash |
8,068 | 4,867 | ||||||
Other assets |
22,371 | 22,730 | ||||||
|
|
|
|
|||||
Total assets |
$ | 713,448 | $ | 386,082 | ||||
|
|
|
|
|||||
Liabilities and Stockholders Equity |
||||||||
Current liabilities |
||||||||
Accounts payable |
$ | 56,141 | $ | 28,951 | ||||
Accrued liabilities |
32,109 | 20,945 | ||||||
Deferred revenue |
2,345 | 4,635 | ||||||
Capital lease obligations, current portion |
1,067 | 279 | ||||||
Reservation payments |
91,761 | 30,755 | ||||||
Long-term debt, current portion |
7,916 | | ||||||
|
|
|
|
|||||
Total current liabilities |
191,339 | 85,565 | ||||||
Common stock warrant liability |
8,838 | 6,088 | ||||||
Capital lease obligations, less current portion |
2,830 | 496 | ||||||
Deferred revenue, less current portion |
3,146 | 2,783 | ||||||
Long-term debt, less current portion |
268,335 | 71,828 | ||||||
Other long-term liabilities |
14,915 | 12,274 | ||||||
|
|
|
|
|||||
Total liabilities |
489,403 | 179,034 | ||||||
|
|
|
|
|||||
Commitments and contingencies (Note 15) |
||||||||
Stockholders equity: |
||||||||
Preferred stock; $0.001 par value; 221,903,982 shares authorized; no shares issued and outstanding |
| | ||||||
Common stock; $0.001 par value; 2,000,000,000 shares authorized as of December 31, 2011 and 2010, respectively; 104,530,305 and 94,908,370 shares issued and outstanding as of December 31, 2011 and 2010, respectively |
104 | 95 | ||||||
Additional paid-in capital |
893,336 | 621,935 | ||||||
Accumulated other comprehensive loss |
(3 | ) | | |||||
Accumulated deficit |
(669,392 | ) | (414,982 | ) | ||||
|
|
|
|
|||||
Total stockholders equity |
224,045 | 207,048 | ||||||
|
|
|
|
|||||
Total liabilities and stockholders equity |
$ | 713,448 | $ | 386,082 | ||||
|
|
|
|
The accompanying notes are an integral part of these consolidated financial statements.
103
Consolidated Statements of Operations
(in thousands, except share and per share data)
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Revenues |
||||||||||||
Automotive sales |
$ | 148,568 | $ | 97,078 | $ | 111,943 | ||||||
Development services |
55,674 | 19,666 | | |||||||||
|
|
|
|
|
|
|||||||
Total revenues |
204,242 | 116,744 | 111,943 | |||||||||
Cost of revenues |
||||||||||||
Automotive sales |
115,482 | 79,982 | 102,408 | |||||||||
Development services |
27,165 | 6,031 | | |||||||||
|
|
|
|
|
|
|||||||
Total cost of revenues |
142,647 | 86,013 | 102,408 | |||||||||
Gross profit |
61,595 | 30,731 | 9,535 | |||||||||
Operating expenses |
||||||||||||
Research and development (net of development compensation of $23,249 for the year ended December 31, 2009) |
208,981 | 92,996 | 19,282 | |||||||||
Selling, general and administrative |
104,102 | 84,573 | 42,150 | |||||||||
|
|
|
|
|
|
|||||||
Total operating expenses |
313,083 | 177,569 | 61,432 | |||||||||
|
|
|
|
|
|
|||||||
Loss from operations |
(251,488 | ) | (146,838 | ) | (51,897 | ) | ||||||
Interest income |
255 | 258 | 159 | |||||||||
Interest expense |
(43 | ) | (992 | ) | (2,531 | ) | ||||||
Other expense, net |
(2,646 | ) | (6,583 | ) | (1,445 | ) | ||||||
|
|
|
|
|
|
|||||||
Loss before income taxes |
(253,922 | ) | (154,155 | ) | (55,714 | ) | ||||||
Provision for income taxes |
489 | 173 | 26 | |||||||||
|
|
|
|
|
|
|||||||
Net loss |
$ | (254,411 | ) | $ | (154,328 | ) | $ | (55,740 | ) | |||
|
|
|
|
|
|
|||||||
Net loss per share of common stock, basic and diluted |
$ | (2.53 | ) | $ | (3.04 | ) | $ | (7.94 | ) | |||
|
|
|
|
|
|
|||||||
Weighted average shares used in computing net loss per share of common stock, basic and diluted |
100,388,815 | 50,718,302 | 7,021,963 | |||||||||
|
|
|
|
|
|
The accompanying notes are an integral part of these consolidated financial statements.
104
Consolidated Statements of Convertible Preferred Stock and Stockholders Equity (Deficit)
(in thousands, except share and per share data)
Convertible Preferred Stock |
Common Stock | Additional Paid-In Capital |
Accumulated Deficit |
Accumulated Other Comprehensive Loss |
Total Stockholders Equity (Deficit) |
|||||||||||||||||||||||||||||
Shares | Amount | Shares | Amount | |||||||||||||||||||||||||||||||
Balance as of December 31, 2008 |
78,355,195 | $ | 101,178 | 7,010,431 | $ | 7 | $ | 5,193 | $ | (204,914 | ) | $ | | $ | (199,714 | ) | ||||||||||||||||||
Issuance of Series E convertible preferred stock in May 2009 (inclusive of conversion of note payable) at $2.51 per share, net of issuance cost of $556 |
102,776,779 | 135,669 | | | | | | | ||||||||||||||||||||||||||
Issuance of Series F convertible preferred stock in August 2009 at $2.97 per share, net of issuance cost of $122 |
27,785,263 | 82,378 | | | | | | | ||||||||||||||||||||||||||
Issuance of common stock upon exercise of stock options, net of repurchases |
| | 273,769 | | 497 | | | 497 | ||||||||||||||||||||||||||
Stock-based compensation |
| | | | 1,434 | | | 1,434 | ||||||||||||||||||||||||||
Net loss |
| | | | | (55,740 | ) | | (55,740 | ) | ||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
Balance as of December 31, 2009 |
208,917,237 | 319,225 | 7,284,200 | 7 | 7,124 | (260,654 | ) | | (253,523 | ) | ||||||||||||||||||||||||
Issuance of common stock in July 2010 initial public offering at $17.00 per share, net of issuance costs of $17,497 |
| 11,880,600 | 12 | 184,461 | | | 184,473 | |||||||||||||||||||||||||||
Issuance of common stock in July 2010 concurrent private placement at $17.00 per share |
| | 2,941,176 | 3 | 49,997 | | | 50,000 | ||||||||||||||||||||||||||
Issuance of common stock in November 2010 private placement at $21.15 per share, net of issuance costs of $42 |
| | 1,418,573 | 1 | 29,957 | | | 29,958 | ||||||||||||||||||||||||||
Conversion of preferred stock into shares of common stock |
| | 70,226,844 | 70 | 319,155 | | | 319,225 | ||||||||||||||||||||||||||
Issuance of common stock upon net exercise of warrants |
(208,917,237 | ) | (319,225 | ) | 445,047 | 1 | 8,662 | | | 8,663 | ||||||||||||||||||||||||
Issuance of common stock upon exercise of stock options, net of repurchases |
| | 711,930 | 1 | 1,349 | | | 1,350 | ||||||||||||||||||||||||||
Tax benefits from employee equity awards |
| | | | 74 | | | 74 | ||||||||||||||||||||||||||
Stock-based compensation |
| | | 21,156 | | | 21,156 | |||||||||||||||||||||||||||
Net loss |
| | | | | (154,328 | ) | | (154,328 | ) | ||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
Balance as of December 31, 2010 |
| | 94,908,370 | 95 | 621,935 | (414,982 | ) | | 207,048 | |||||||||||||||||||||||||
Issuance of common stock in June 2011 public offering at $28.76 per share, net of issuance costs of $305 |
| | 6,095,000 | 6 | 172,403 | | | 172,409 | ||||||||||||||||||||||||||
Issuance of common stock in June 2011 concurrent private placements at $28.76 per share |
| | 2,053,475 | 2 | 59,056 | | | 59,058 | ||||||||||||||||||||||||||
Issuance of common stock upon exercise of stock options, net of repurchases |
| | 1,250,002 | 1 | 6,642 | | | 6,643 | ||||||||||||||||||||||||||
Issuance of common stock under employee stock purchase plan |
| | 223,458 | | |
3,882 |
|
| | |
3,882 |
| ||||||||||||||||||||||
Stock-based compensation |
| | | | 29,419 | | | 29,419 | ||||||||||||||||||||||||||
Comprehensive loss: |
||||||||||||||||||||||||||||||||||
Net loss |
| | | | | (254,411 | ) | | (254,411 | ) | ||||||||||||||||||||||||
Unrealized loss on short-term marketable securities, net |
| | | | | | (3 | ) | (3 | ) | ||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
Total comprehensive loss |
| | | | | | | (254,414 | ) | |||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
Balance as of December 31, 2011 |
| $ | | 104,530,305 | $ | 104 | $ | 893,337 | $ | (669,393 | ) | $ | (3 | ) | $ | 224,045 | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The accompanying notes are an integral part of these consolidated financial statements.
105
Consolidated Statements of Cash Flows
(in thousands)
Year Ended December 31, | ||||||||||||
2011 | 2010 | 2009 | ||||||||||
Cash Flows From Operating Activities |
||||||||||||
Net loss |
$ | (254,411 | ) | $ | (154,328 | ) | $ | (55,740 | ) | |||
Adjustments to reconcile net loss to net cash used in operating activities: |
||||||||||||
Depreciation and amortization |
16,919 | 10,623 | 6,940 | |||||||||
Change in fair value of warrant liabilities |
2,750 | 5,022 | 1,128 | |||||||||
Gain on extinguishment of convertible notes and warrants |
| | (1,468 | ) | ||||||||
Discounts and premiums on short-term marketable securities |
(112 | ) | | | ||||||||
Stock-based compensation |
29,419 | 21,156 | 1,434 | |||||||||
Excess tax benefits from stock-based compensation |
| (74 | ) | | ||||||||
Loss on abandonment of fixed assets |
345 | 8 | 385 | |||||||||
Inventory write-downs |
1,828 | 951 | 1,353 | |||||||||
Interest on convertible notes |
| | 2,686 | |||||||||
Changes in operating assets and liabilities |
||||||||||||
Accounts receivable |
(2,829 | ) | (3,222 | ) | (168 | ) | ||||||
Inventories and operating lease vehicles |
(13,638 | ) | (28,513 | ) | (7,925 | ) | ||||||
Prepaid expenses and other current assets |
(248 | ) | (4,977 | ) | (2,042 | ) | ||||||
Other assets |
(288 | ) | (463 | ) | (445 | ) | ||||||
Accounts payable |
31,859 | (212 | ) | 902 | ||||||||
Accrued liabilities |
12,321 | 13,345 | 3,387 | |||||||||
Deferred development compensation |
| (156 | ) | (10,017 | ) | |||||||
Deferred revenue |
(1,927 | ) | 4,801 |