GMED 12.31.14 10K
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
_________________________
FORM 10-K
(Mark One)
| |
x | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) |
OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2014
or
| |
o | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) |
OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from ______________ to _______________
Commission File No. 001-35621
GLOBUS MEDICAL, INC.
(Exact name of registrant as specified in its charter)
|
| | |
DELAWARE | | 04-3744954 |
(State or other jurisdiction of incorporation or organization) | | (I.R.S. Employer Identification No.) |
| | |
2560 General Armistead Avenue, Audubon, PA | | 19403 |
(Address of principal executive offices) | | (Zip Code) |
| | |
Registrant’s telephone number, including Area Code: |
(610) 930-1800 |
Securities registered pursuant to Section 12(b) of the Act:
|
| |
Title of each class | Name of each exchange on which registered |
Class A Common Stock, par value $.001 per share | New York Stock Exchange |
| |
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act:
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act:
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days:
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files):
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K:
o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (check one):
|
| | | |
Large accelerated filer x | Accelerated filer o | Non-accelerated filer o (Do not check if a smaller reporting company) | Smaller reporting company o |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act):
Yes ¨ No x
The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant, computed by reference to the closing sales price for the registrant’s common stock on the last business day of the registrant’s most recently completed second quarter, June 30, 2014, as reported on the New York Stock Exchange, was approximately $1.6 billion.
The number of shares outstanding of the registrant’s common stock (par value $0.001 per share) as of January 31, 2015 was 94,761,428 shares.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of our Proxy Statement for our 2015 Annual Meeting of Stockholders, to be filed within 120 days of December 31, 2014, are incorporated by reference in Part III, Items 10, 11, 12, 13 and 14 herein of this Annual Report. Such Proxy Statement, except for the parts therein which have been specifically incorporated by reference, shall not be deemed “filed” for the purposes of this Annual Report on Form 10-K.
GLOBUS MEDICAL, INC. AND SUBSIDIARIES
TABLE OF CONTENTS
|
| | |
| | Page |
| | |
| PART I | |
Item 1. | Business | |
Item 1A. | Risk Factors | |
Item 1B. | Unresolved Staff Comments | |
Item 2. | Properties | |
Item 3. | Legal Proceedings | |
Item 4. | Mine Safety Disclosures | |
| | |
| PART II | |
Item 5. | Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities | |
Item 6. | Selected Financial Data | |
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations | |
Item 7A. | Quantitative and Qualitative Disclosures About Market Risk | |
Item 8. | Financial Statements and Supplementary Data | |
Item 9. | Changes in and Disagreements With Accountants on Accounting and Financial Disclosure | |
Item 9A. | Controls and Procedures | |
Item 9B. | Other Information | |
| | |
| PART III | |
Item 10. | Directors, Executive Officers and Corporate Governance | |
Item 11. | Executive Compensation | |
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters | |
Item 13. | Certain Relationships and Related Transactions, and Director Independence | |
Item 14. | Principal Accountant Fees and Services | |
| | |
| PART IV | |
Item 15 | Exhibits and Financial Statement Schedules | |
| | |
| SIGNATURES | |
| | |
PART I
CAUTIONARY NOTE CONCERNING FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements other than statements of historical fact are forward-looking statements. We have tried to identify forward-looking statements by using words such as “believe,” “may,” “might,” “could,” “will,” “aim,” “estimate,” “continue,” “anticipate,” “intend,” “expect,” “plan” and similar words. These forward-looking statements are based on our current assumptions, expectations and estimates of future events and trends. Forward-looking statements are only predictions and are subject to many risks, uncertainties and other factors that may affect our businesses and operations and could cause actual results to differ materially from those predicted. These risks and uncertainties include, but are not limited to, factors affecting our quarterly results, our ability to manage our growth, our ability to sustain our profitability, demand for our products, our ability to compete successfully (including without limitation our ability to convince surgeons to use our products and our ability to attract and retain sales and other personnel), our ability to rapidly develop and introduce new products, our ability to develop and execute on successful business strategies, our ability to comply with changes and applicable laws and regulations that are applicable to our businesses, our ability to safeguard our intellectual property, our success in defending legal proceedings brought against us, trends in the medical device industry, and general economic conditions, and other risks set forth throughout this Annual Report, including under “Item 1, Business,” “Item 1A, Risk Factors,” and “Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and those discussed in other documents we file with the Securities and Exchange Commission (the “SEC”). Moreover, we operate in an evolving environment. New risk factors and uncertainties emerge from time to time and it is not possible for us to predict all risk factors and uncertainties, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.
Given these risks and uncertainties, readers are cautioned not to place undue reliance on any forward-looking statements. Forward-looking statements contained in this Annual Report speak only as of the date of this Annual Report. We undertake no obligation to update any forward-looking statements as a result of new information, events or circumstances or other factors arising or coming to our attention after the date hereof.
Item 1. Business
Overview
Globus Medical, Inc. (“Globus,” “we,” “us” or “our”) is a medical device company focused on developing products that promote healing in patients with musculoskeletal disorders. We are currently focused on products to treat patients with spine disorders. We are an engineering-driven company with a history of rapidly developing and commercializing advanced and innovative products and procedures that assist surgeons in effectively treating their patients. Since our inception in 2003, we have launched over 130 products and offer a comprehensive portfolio of innovative and differentiated products addressing a broad array of spinal pathologies, anatomies and surgical approaches. We continue to devote significant efforts to the development of new and innovative technologies for the treatment of patients with spine disorders. In 2014, those efforts resulted in the launch of sixteen new products.
All of our products fall into one of two categories: Innovative Fusion or Disruptive Technologies. Our Innovative Fusion products comprise fusion products to treat a wide variety of spinal disorders for the
entire spine and can be used in a variety of surgical approaches. We believe our Innovative Fusion products have features and characteristics that may provide advantages for surgeons and potentially contribute to better outcomes for patients as compared to competing traditional fusion products.
We define Disruptive Technologies as those that represent a significant shift in the treatment of spinal disorders by allowing for novel surgical procedures, improvements to existing surgical procedures and the treatment of spinal disorders earlier in the continuum of care. We believe the use of Disruptive Technologies may improve patient outcomes and reduce costs given the expected lower morbidity rates, shorter patient recovery times and shorter hospital stays associated with these procedures. Additionally, Disruptive Technologies may help a patient avoid progression of spinal disc disease sometimes caused by traditional surgical options such as spinal fusion. Our current portfolio of approved and pipeline Disruptive Technology products includes products that allow for minimally invasive surgical (“MIS”) techniques, as well as new treatment alternatives, including motion preservation technologies, such as dynamic stabilization, total disc replacement and interspinous process spacer products, and advanced biomaterials technologies, as well as interventional pain management solutions, including treatments for vertebral compression fractures.
While we group our products into two categories, we do not limit our products to a particular technology, platform or surgical approach. Our goal, instead, is to offer spine surgeons a complete suite of products they can use to most effectively treat their patients, based on the patient’s particular anatomy and condition and the surgeon’s particular training and surgical preference.
Recent Developments
In October 2014, we completed the acquisition of Transplant Technologies of Texas, Ltd., (“TTOT”), an allograft tissue processor based in San Antonio, Texas. TTOT is a provider of human tissue products such as bone allografts, biomaterials and soft tissue products for spine, orthopedics, sports medicine, dental and wound care markets. This acquisition represents a key step in fulfilling our strategy of building a broad business in regenerative biologics. While we currently partner with third party suppliers for our existing allograft products, the acquisition of TTOT will expand our suite of regenerative biologics products. We believe this acquisition will also greatly improve our capabilities for the development of new and innovative human allograft tissue products in the future.
On February 25, 2015, we entered into an agreement to acquire medical device manufacturer Branch Medical Group, Inc. (“BMG”). Under the terms of the agreement we have agreed to pay approximately $52.9 million in cash subject to certain closing adjustments for BMG on a cash-free, debt-free basis. We expect the closing of the acquisition to occur in March 2015 following satisfaction of the applicable closing conditions.
Strategy
Our goal is to become the leader in providing innovative solutions across the continuum of care in the spine market. To achieve this goal, we are employing the following business strategies:
| |
• | Leverage our product development engine. We plan to continue developing both Innovative Fusion products and Disruptive Technology products using our product development engine. We believe our team-oriented approach, active surgeon input and demonstrated product development capabilities position us to maintain a rapid rate of new product launches. We launched sixteen new products in 2014, have over 30 potential new products in various stages of development, and expect to launch approximately five to ten new products in each of the next three years. |
| |
• | Increase the size, scope and productivity of our exclusive U.S. sales force. We believe there is significant opportunity for us to further penetrate existing markets and to enter new markets by increasing the size and geographic scope of our exclusive U.S. sales force. We expect to continue to increase the number of our direct and distributor sales representatives in the United States to expand into new geographic territories and to deepen our penetration in existing territories. We will also continue to provide our sales representatives with specialized development programs designed to improve their productivity. |
| |
• | Continue to expand into international markets. As of December 31, 2014, we had an existing direct or distributor sales presence in 33 countries outside the United States. We expect to continue to increase our international presence through the commercialization of additional products and through the expansion of our international sales force. |
| |
• | Pursue strategic acquisitions and alliances. We intend to selectively pursue acquisitions and alliances in the future that will provide us with new or complementary technologies, personnel with significant relevant experience, or increased market penetration. We are currently evaluating a number of possible acquisitions or strategic relationships and believe that our resources and experience make us an attractive acquirer or partner. |
The Spine Market
Spine disorders are a leading driver of healthcare costs worldwide. Spine disorders range in severity from mild pain and loss of feeling to extreme pain and paralysis. These disorders are primarily caused by degenerative conditions in the spine, deformity, tumors and trauma.
Treatment alternatives for spine disorders range from non-operative conservative therapies to surgical interventions. Conservative therapies include bed rest, medication and physical therapy. When conservative therapies fail to provide adequate quality of life improvements, surgical interventions may be used to address pain. Surgical treatments for spine disorders can be instrumented, which include the use of implants, or non-instrumented, which forego the use of any such implants.
We believe the spine market will continue to experience growth as a result of the following market influences:
| |
• | Favorable patient demographics. The number of people over the age of 65 is large and growing. Improvements in healthcare have led to increasing life expectancies worldwide and the opportunity to lead more active lifestyles at advanced ages. These trends are expected to generate increased demand for spine surgeries. |
| |
• | Improving technologies leading to increased use in fusion procedures. Due to the longevity of its practice and acceptable clinical outcomes, fusion has become a standard treatment option for patients presenting more advanced stages of spine disease. We expect that the development of improved fusion products will continue to contribute to spinal fusion as a leading treatment for advanced stages of spine disease. |
| |
• | Disruptive Technologies driving earlier interventions and creating an expanded patient base. Newer technology products and procedures are gaining increasing acceptance among patients and surgeons because they allow for novel surgical procedures, improvements to existing surgical procedures, the treatment of spine disorders by new physician specialties, and surgical intervention earlier in the continuum of care, all of which can result in better outcomes for patients. As a |
result, we expect Disruptive Technologies to drive accelerated growth and increase the size of the addressable patient population for spine surgery.
| |
• | Increased demand in international markets. While the United States comprises approximately 4% of the worldwide population, we believe that approximately half of all spine surgeries occur in the United States. We believe that improvements to the standard of care outside of the United States will increase the international demand for spine products. |
The Globus Solution
We currently offer over 130 products for the treatment of spine disorders.
Innovative Fusion Products
The depth of our Innovative Fusion portfolio encompasses treatment modalities from the occiput to the sacrum, with novel designs and features that provide key improvements to the standards of care. We also build on proven technologies to continuously upgrade our offerings, including a range of interbody implant and surgical approach options.
Our Innovative Fusion products address the entire spine to treat degenerative, deformity, tumor, and trauma conditions. We believe that our products offer features and characteristics that provide advantages over traditional fusion products that may help improve surgical techniques and may contribute to better outcomes for patients. For example, in 2013, we introduced a new pedicle screw platform, CREO®. This new system is optionally modular and offers lower profile constructs along with a variety of options to meet surgical and patient needs. CREO® includes our convenient non-threaded locking cap design that eases building of thoracolumbar fixation constructs to readily adapt to the patient’s anatomy and condition, for a range of clinical applications. In 2014, among several other new products, we launched several additions to the CREO® platform including streamlined and intuitive instruments that offer surgeons options for almost any situation or preference.
The depth of our Innovative Fusion portolio encompasses treatment modalities from the occiput to the sacrum, with novel designs and features that provide improvements to the standard of care. We also build on proven technologies to continuously upgrade out offerings.
Disruptive Technologies Products
We believe we are well positioned to capitalize on this higher-growth segment of the spine market given our multiple existing commercialized products and several products in various stages of development. We have a broad, comprehensive product portfolio and pipeline of Disruptive Technologies, including MIS, motion preservation, and advanced biomaterials technologies, as well as interventional pain management solutions.
Our MIS products enable a surgeon to perform a procedure less invasively to minimize tissue disruption and maximize native anatomy, which may lead to better patient recovery and fewer approach-related complications. For example, our MARS™ 3V retractor system facilitates smaller incisions with the use of positionable radiolucent retractor blades to access the surgical site and to allow both direct and radiographic visualization. We believe we have the most comprehensive offering of expandable interbody cages in the industry, and added ALTERA®, an articulating expandable spacer, to our lineup in 2014. Key products in this family, including CALIBER®, RISE® and LATIS® interbody spacers, are designed to enable reliable, minimally disruptive delivery through small MIS incisions with streamlined implants and
instruments. We offer a variety of innovative fixation options including plates and pedicle screw systems designed for minimally invasive insertion.
Similarly, other Disruptive Technology products include our motion preservation offerings, such as SECURE®-C and SECURE®-CR, which are next-generation cervical arthroplasty devices that allow segmental motion, are semi-constrained, and provide alternatives to fusion in the treatment of degenerative conditions. In 2014, we launched MONUMENT®, our interbody implant intended to aid in the reduction of a grade 1 spondylolisthesis using its built-in, self-locking mechanical reduction feature.
Our advanced biomaterials products, including bioactive glass-based KINEX® and SIGNIFY™ bone void fillers and CONDUCT® ceramic-collagen, are well suited for pelvic/extremity and posterolateral spinal fusion procedures. Our SHIELD® and AFFIRM® products allow for the treatment of painful vertebral compression fractures.
Product Development and Research
Globus was founded with a goal of leveraging our team’s extensive experience in the spine industry to use a distinctive product development process that significantly reduces the length of time between a product’s concept stage and commercialization. Our product development engine is the name we give to our particular approach to product development, which we believe is unique and highly efficient. We employ an integrated team approach to product development that involves collaboration among surgeons, our engineers, our dedicated researchers, our highly-skilled machinists, and our clinical and regulatory personnel. We believe that utilizing these integrated teams, as well as our extensive in-house facilities, allows us to design, test, and obtain timely regulatory clearance and approvals of our products. We also believe that our product development engine enables us to develop products that provide advantages for surgeons and contribute to better outcome for patients.
Our product development efforts are supported by our in-house research capabilities. We believe that centralizing and consolidating the critical elements of the product development and commercialization process in one facility allows us to bring products from the concept stage to the market rapidly in order to respond to surgeon and patient needs. Our research resources include a clinical research group, a mechanical testing laboratory, a spinal kinematics laboratory, a tribology laboratory, a cadaveric laboratory, a materials characterization laboratory, and a computational laboratory.
The markets in which we operate are subject to rapid technological advancements. We must constantly improve our existing products and introduce new products in order to continue to succeed. Accordingly, we have made significant investments in our product development and research capabilities. For the years ended December 31, 2014, 2013 and 2012, we spent $31.7 million, $26.9 million and $27.9 million, respectively, on research and development.
Clinical Development Programs
In addition to the products we currently market, we continue to develop and test new spine products. As we focus our attention on developing more Disruptive Technologies, we are required to conduct clinical trials in order to obtain U.S. Food and Drug Administration (“FDA”) approval or clearance to market some of those products. We received our first FDA pre-market approval (“PMA”) for our SECURE®-C Cervical Artificial Disc in September 2012 and are currently conducting other clinical trials under FDA-approved investigational device exemptions (“IDEs”), including ACADIA® and TRIUMPH®. The ACADIA® Facet Replacement System is a motion preserving anatomic reconstruction of the facet joint intended for the treatment of spinal stenosis, and was acquired in 2011 from Facet Solutions. A prospective randomized
pivotal study of ACADIA® is currently underway in the United States to enroll and treat up to 750 qualified patients randomly selected for the treatment or control of posterolateral fusion arm in a 2:1 ratio. The TRIUMPH® Lumbar Disc is a motion preserving disc replacement inserted obliquely into the disc space from a posterolateral approach to address posterior spinal pathology and maintain important anterior anatomical structures. A 20-patient IDE pilot study for treatment of patients suffering from back and leg pain has been completed. Both ACADIA® and TRIUMPH® are European Conformity marked (“CE marked”) and available for sale in certain jurisdictions outside the United States.
Sales and Marketing
We market and sell our products through our exclusive global sales force. As of December 31, 2014, we had a direct or distributor sales presence in the United States and in 33 countries outside the United States. We expect to continue to increase the number of our direct and distributor sales representatives, both in the U.S. and internationally, to expand into new geographic territories and to deepen our penetration in existing territories. We believe the expansion of our U.S. and international sales forces provides us with significant opportunities for future growth as we continue to penetrate existing geographic markets and enter new ones.
Our sales representatives are present in the operating room during most surgeries in the United States and in many, but not all, of the other countries in which our products are sold. Our representatives have the responsibility to confirm that all of the items needed in the surgery are sterile when provided or are capable of being sterilized at the hospital and are available to the surgeon and surgical staff. Various sizes and quantities of implants are made available to be able to satisfy varying surgical requirements and patient anatomy, along with numerous surgical instruments and cases needed to safely perform the surgery and implantation. As our products are used in surgeries, we ship replacement items to our sales representatives and hospitals to replenish their supply.
All of our independent distributors are compensated solely on commission. Most of our new direct sales representatives start with a compensation arrangement that is largely based on salary. Our goal is to have members of our direct sales force move toward a compensation model based solely on commission as they become familiar with our products and drive higher sales.
Advancement of Spine Care
We are committed to the advancement of spine care through our support of numerous educational and research programs geared towards spine surgeons, such as:
| |
• | national and regional educational courses; |
| |
• | intensive hands-on cadaveric training on new products and new techniques; |
| |
• | research collaboration and support; |
| |
• | educational support; and |
We devote significant resources to training and educating surgeons in the safe and effective use of our products and techniques. To that end, we have made significant investments in the creation, staffing and program offerings of our Musculoskeletal Education and Research Center (“MERC”). Through MERC, we offer educational and training programs both internally in our modern bioskills laboratory and 100 person lecture facility and externally through regionally-based didactic education and cadaveric bioskills training programs.
We are highly focused on training through programs such as our Skin-to-Skin® Series programs that feature intensive two day MIS training programs on thoracolumbar interbody fusion procedures and our lateral lumbar interbody fusion labs. To complement these intensive cadaveric bioskills training programs,
we also conduct product-based programs providing surgeons with informative didactic sessions coupled with hands-on-lab segments to allow surgeons to learn and experience new instrumentation and techniques. For more complex procedures and techniques, surgeon preceptorships are offered which provide surgeons with one-on-one intraoperative training followed in some instances by focused bioskills labs.
We have a strong commitment to research performed in conjunction with surgeons from around the world. Many surgeons, particularly in non-academic settings, lack the resources to pursue academic investigation of areas of interest, and we actively support these research opportunities as well as opportunities in collaboration with leading academic institutions. Supported by a large, focused research team, these efforts range from basic biomechanical testing conducted internally with our six degrees of freedom machine to support of major clinical outcomes studies. We are committed to providing the spine surgeon community with high quality research to support the new surgical techniques and novel product designs that we develop.
Competition
We believe that our significant competitors are Medtronic, the DePuy Synthes Companies (a division of Johnson & Johnson), Stryker and NuVasive. Alphatec Spine, Orthofix International, Zimmer, LDR Holding, Biomet, K2M and other smaller public and private companies are also competitors of ours. At any time, these or other market participants may develop alternative treatments, products or procedures for the treatment of spine disorders that compete directly or indirectly with our products. They may also develop and patent processes or products earlier than we can or obtain regulatory clearance or approvals for competing products more rapidly than we can.
We compete in the marketplace to recruit and retain qualified scientific, management and sales personnel, as well as in acquiring technologies and technology licenses complementary to our products or advantageous to our business.
Our currently marketed products are, and any future products we commercialize will be, subject to intense competition. Many of our current and potential competitors are major medical device companies that have substantially greater financial, technical and marketing resources than we do, and they may succeed in developing products that would render our products obsolete or noncompetitive. In addition, many of these competitors have significantly longer operating history and more established reputations than we do. The spine market is intensely competitive, subject to rapid change and highly sensitive to the introduction of new products or other market activities of industry participants. Our ability to compete successfully will depend on our ability to develop proprietary products that reach the market in a timely manner, receive adequate coverage and reimbursement, and are safer, less invasive and more effective than alternatives available for similar purposes. Because of the size of the potential market, we anticipate that companies will dedicate significant resources to developing competing products.
Manufacturing and Supply
Most of our products are generally manufactured through a network of over 100 international and domestic third-party suppliers. Our suppliers utilize state-of-the-art, high precision, computer-aided manufacturing equipment to manufacture our products. We have focused on developing a strong supplier base as part of our manufacturing strategy. Our relationship with our suppliers enables significant interaction between our design engineers and project managers and the suppliers' engineers and schedulers to work through issues arising during the entire product development cycle. Many of our suppliers, including our largest suppliers, are located within a 100-mile radius of the Philadelphia area, which affords our engineers and other members of our product development team the opportunity to work closely with them to commercialize our products.
We select our suppliers carefully and generally use a small number of suppliers for each of our key products for added reliability. Our internal quality assurance group evaluates the potential vendor through a formal vendor approval process before we enter into a relationship with the vendor. Suppliers that meet our internal quality assurance standards are added to our approved supplier list. All of our suppliers that provide us with implants or human tissue are ISO-13485 certified, meaning they meet the International Organization for Standardization (“ISO”) requirements for the manufacture of medical devices, and/or are accredited by the American Association of Tissue Banks. Our quality assurance group conducts periodic audits to ensure continued compliance with our standards. With every shipment of inventory that we receive, our suppliers provide a certificate of compliance with our quality control standards. Our receiving group also performs inspections, packaging and labeling onsite at our headquarters facility.
We work closely with our suppliers to ensure that our inventory needs are met while maintaining high quality and reliability. To date, we have not experienced significant difficulty in locating and obtaining the materials necessary to fulfill our production requirements, and we have not experienced a meaningful backlog of sales orders. We believe our supplier relationships and facilities will support our potential capacity needs for the foreseeable future.
A small percentage of our products, chiefly some of our advanced biomaterials, are manufactured in-house at our headquarters. We also use our facilities for inspection, packaging and labeling a large percentage of our inventory. Additionally, our recent acquisition of TTOT has significantly expanded our dedicated manufacturing capabilities. TTOT provides us with biomaterial products processed from human allograft tissue in its facility in San Antonio, Texas.
A majority of our product inventory is held primarily with our sales representatives and at hospitals throughout the United States. We stock inventory in our warehouse facilities and retain title to consigned inventory which is maintained with our field representatives and hospitals in sufficient quantities so that products are available when needed for surgical procedures. Safety stock levels are determined based on a number of factors, including demand, manufacturing lead times and quantities required to maintain service levels.
Intellectual Property
We protect our proprietary rights through a variety of methods. In particular, we rely on patent, trademark, copyright, trade secret and other intellectual property laws and also utilize nondisclosure agreements and other measures to protect our rights.
As of December 31, 2014, we owned 264 issued U.S. patents (249 utility patents; 15 design patents) and had applications pending for 383 U.S. patents (379 utility patent applications; four design patent applications), and we owned 78 issued foreign patents and had applications pending for 140 foreign patents. One of our issued patents expires in March 2015, and the rest of our issued patents expire between November 2019 and May 2032.
Our trademark portfolio contains 117 registered trademarks and 56 pending trademarks. Our portfolio includes domestic and foreign trademarks with associated logos and tag lines.
Third-Party Coverage and Reimbursement
We expect that, in the future, sales volumes and prices of our products may grow to be more dependent on the availability of coverage and reimbursement from third-party payors, such as government programs including Medicare and Medicaid, private insurance plans and managed care programs. Reimbursement is
dynamic and is contingent on coding for given services or procedures, coverage by third-party payors, and adequate payment for the services or procedures.
Physicians use Current Procedural Terminology (“CPT”) codes to bill for services and procedures, which are established by the American Medical Association (“AMA”). Specialty societies such as the North American Spine Society, the American Association of Neurological Surgeons, and the American Academy of Orthopaedic Surgeons provide advice to the AMA CPT Editorial Panel for developing codes. The Centers for Medicare and Medicaid Services (“CMS”), the agency responsible for administering Medicare, and the National Center for Health Statistics, are jointly responsible for overseeing changes and modifications to International Classification of Diseases and Clinical Modification procedure codes used by hospitals for reporting inpatient procedures. Physician and hospital coding is subject to change, which could impact coverage and reimbursement and thus potentially impact physician practice behavior.
Independent of coding status, third-party payors may deny coverage based on their own criteria. Payor medical policies continue to become more restrictive. Payors may deem the clinical efficacy of a device or procedure to be experimental or investigational, not the most cost-effective treatment available, or used for an unapproved indication. For example, Aetna changed its medical policy from coverage for all indications to coverage for only limited indications for biomechanical devices (e.g., spine cages) for cervical fusion procedures, citing they have not been proven more effective than bone graft for cervical fusions. Additionally, many private payors use coverage decisions and payment amounts established by CMS for the Medicare program as guidelines in setting their coverage and reimbursement policies. As the portion of the U.S. population over the age of 65 and eligible for Medicare continues to grow, we may be more vulnerable to coverage and reimbursement limitations imposed by CMS. National and regional coverage policy decisions are subject to unforeseeable change and have the potential to impact physician behavior. We will continue to provide the appropriate resources to patients, physicians, hospitals, and insurers in order to promote the best patient care, provide clarity regarding coverage and reimbursement policies, and work to reverse any non-coverage policies.
For some government programs, such as Medicaid, coverage and reimbursement differ from state to state. Some state Medicaid programs may not reimburse an adequate amount for the procedures performed with our products, if any payment is made at all. In addition, payment by Medicare and other third-party payors may not be adequate to cover the cost of medical devices used in spine procedures. Additionally, the percentage of individuals covered by managed care programs is expected to grow in the United States over the next decade. Many managed care programs reimburse providers on a capitated basis, which puts the providers at financial risk for the services provided to their patients by paying them a predetermined amount per member per month.
In international markets, reimbursement and healthcare payment systems vary significantly by country and some countries have instituted price ceilings on specific product lines. There can be no assurance that our products will be accepted by third-party payors, that coverage and reimbursement will be available or, if available, that the third-party payors’ coverage and reimbursement policies will not adversely affect our ability to sell our products profitably.
We believe that the overall escalating cost of medical products and services has led to, and will continue to lead to, increased pressures on the healthcare industry to reduce the costs of products and services. There can be no assurance that third-party coverage and reimbursement will be available or adequate, or that future legislation, regulation, or coverage and reimbursement policies of third-party payors will not adversely affect the demand for our products or our ability to sell these products on a profitable basis.
Government Regulation
Our business is subject to extensive federal, state, local and foreign regulations. Some of the pertinent laws have not been definitively interpreted by the regulatory authorities or the courts, and their provisions are open to a variety of subjective interpretations. In addition, these laws and their interpretations are subject to change.
Both federal and state governmental agencies continue to subject the healthcare industry to intense regulatory scrutiny, including heightened civil and criminal enforcement efforts. We believe that we have structured our business operations and relationships with our customers to comply with all applicable legal requirements. However, it is possible that governmental entities or other third parties could interpret these laws differently and assert otherwise. We discuss below the statutes and regulations that are most relevant to our business.
U.S. Food and Drug Administration Regulation
Our products are medical devices and human tissue products subject to extensive regulation by the FDA and other federal, state, local and foreign regulatory bodies. FDA regulations govern, among other things, the following activities that we or our partners perform and will continue to perform:
| |
• | product design and development; |
| |
• | product testing, manufacturing and safety; |
| |
• | post-market surveillance and reporting; |
| |
• | post-market approval studies; and |
| |
• | product advertising, marketing and promotion. |
FDA’s Pre-market Clearance and Approval Requirements
Unless an exemption applies, each medical device we wish to commercially distribute in the United States requires either 510(k) clearance or a PMA from the FDA. The FDA classifies medical devices into one of three classes. Devices deemed to pose lower risk are placed in either Class I or II, which requires the manufacturer to submit to the FDA a pre-market notification requesting permission for commercial distribution. This process is known as 510(k) clearance. Some low risk devices are exempt from this requirement. Devices deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices, or devices deemed not substantially equivalent to a previously cleared 510(k) device are placed in Class III, typically requiring approval of a PMA application. Both pre-market clearance and PMA applications are subject to the payment of user fees, paid at the time of submission for FDA review. The FDA can also impose restrictions on the sale, distribution or use of devices at the time of their clearance or approval, or subsequent to marketing.
Human Cell, Tissue and Cellular and Tissue Based Products
We currently distribute a number of products processed from human tissue, some of which are manufactured by third-party suppliers. FDA regulates human tissue products as Human Cells and Cellular and Tissue Based Products (“HCT/Ps”). Certain HCT/Ps are regulated solely under Section 361 of the Public Health Service Act and are referred to as “Section 361 HCT/Ps,” while other HCT/Ps are subject to FDA's regulatory requirements for medical devices or biologics. Section 361 HCT/Ps do not require 510(k) clearance, PMA approval, or other premarket approvals from FDA before marketing. Tissue banks that handle HCT/Ps must register their establishments with FDA, list their HCT/P products with FDA, and comply with FDA's requirements for donor eligibility and screening, current Good Tissue Practices (“CGTPs”), product labeling, and postmarket reporting for HCT/Ps.
The FDA periodically inspects tissue processors to determine compliance with these requirements. Entities that provide us with allograft bone tissue are responsible for performing donor recovery, donor screening and donor testing and our compliance with those aspects of the CGTPs regulations that regulate those functions are dependent upon the actions of these independent entities.
The procurement and transplantation of allograft bone tissue is subject to U.S. federal law pursuant to the National Organ Transplant Act (“NOTA”), a criminal statute which prohibits the purchase and sale of human organs used in human transplantation, including bone and related tissue, for “valuable consideration.” NOTA permits reasonable payments associated with the removal, transportation, processing, preservation, quality control, implantation and storage of human bone tissue. With the exception of removal and implantation, we provide services in all of these areas.
The procurement of human tissue is also subject to state anatomical gift acts and some states have statutes similar to NOTA. In addition, some states require that tissue processors be licensed by that state.
FDA Enforcement
The FDA enforces these requirements by inspection and market surveillance. Failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following sanctions:
| |
• | untitled letters or warning letters; |
| |
• | fines, injunctions and civil penalties; |
| |
• | recall or seizure of our products; |
| |
• | operating restrictions, partial suspension or total shutdown of production; |
| |
• | refusing our request for 510(k) clearance or PMA of new products; |
| |
• | withdrawing 510(k) clearance or PMAs that are already granted; and |
We are subject to unannounced device inspections by the FDA, the Office of Compliance, the Center for Devices and Radiological Health, and the Center for Biologics Evaluation and Research, as well as other regulatory agencies overseeing the implementation and adherence of applicable state and federal tissue licensing regulations. These inspections may include our suppliers’ facilities.
International
International sales of medical devices are subject to foreign government regulations, which vary substantially from country to country. In order to market our products in other countries, we must obtain regulatory approvals and comply with extensive safety and quality regulations in other countries. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA clearance or approval, and the requirements may differ. The European Union/European Economic Area (“EEA”) requires CE conformity mark in order to market medical devices. Many other countries, such as Australia, India, New Zealand, Pakistan and Sri Lanka, accept CE or FDA clearance or approval although others, such as Brazil, Canada and Japan, require separate regulatory filings.
In the EEA, our devices are required to comply with the essential requirements of the EU Medical Device Directive (Council Directive 93/42/EEC). Compliance with these requirements entitles us to affix the CE conformity mark to our medical devices, without which they cannot be commercialized in the EEA. To demonstrate compliance with the essential requirements and obtain the right to affix the CE conformity mark we must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification.
Additionally in the EEA, the procurement, testing, processing, preservation, storage and distribution of human tissues and cells is subject to the requirements of the laws of individual EEA Member States implementing Directive 2004/23/EC, Directive 2006/17/EC and Directive 2006/86/EC.
Further, the advertising and promotion of our products in the EEA is subject to the laws of individual EEA Member States implementing the EU Medical Device Directive, Directive 2006/114/EC concerning misleading and comparative advertising, and Directive 2005/29/EC on unfair commercial practices, as well as other EEA Member State laws governing the advertising and promotion of medical devices. These laws may limit or restrict the advertising and promotion of our products to the general public and may impose limitations on our promotional activities with healthcare professionals.
We are subject to unannounced device inspections by the Notified Body (an organization accredited by a Member State of the EEA to conduct conformity assessments), as well as other regulatory agencies overseeing the implementation and adherence of applicable regulations. These inspections may include our suppliers’ facilities.
Sales and Marketing Commercial Compliance
Federal anti-kickback laws and regulations prohibit, among other things, persons from knowingly and willfully soliciting, receiving, offering or paying remuneration, directly or indirectly, in exchange for, or to induce either the referral of an individual, or the purchase, order or recommendation of, any good or service paid for under federal healthcare programs such as the Medicare and Medicaid programs.
In addition, federal false claims laws prohibit any person from knowingly presenting, or causing to be presented, a false claim for payment to the federal government, or knowingly making, or causing to be made, a false statement to get a false claim paid. Off-label promotion has been pursued as a violation of the federal false claims laws. Pursuant to FDA regulations, we can only market our products for cleared or approved uses. Although surgeons are permitted to use medical devices for indications other than those cleared or approved by the FDA based on their medical judgment, we are prohibited from promoting products for such off-label uses. Additionally, the majority of states in which we market our products have similar anti-kickback, false claims, anti-fee splitting and self-referral laws, which may apply to items or services
reimbursed by any third-party payor, including commercial insurers, and violations may result in substantial civil and criminal penalties.
The United States and foreign government regulators have increased regulation, enforcement, inspections and governmental investigations of the medical device industry, including under the United Kingdom’s Bribery Act and increased U.S. government oversight and enforcement of the U.S. Foreign Corrupt Practices Act (“FCPA”).
Additionally, the commercial compliance environment is continually evolving in the healthcare industry as some states, including California, Massachusetts and Vermont, mandate implementation of corporate compliance programs, along with the tracking and reporting of gifts, compensation and other remuneration to physicians. The Patient Protection and Affordable Care Act, as amended by the Health Care and Education Affordability Reconciliation Act (collectively “PPACA”) also imposes new reporting and disclosure requirements on device manufacturers for any “transfer of value” made or distributed to prescribers and other healthcare providers. The shifting compliance environment and the need to build and maintain robust and expandable systems to comply in multiple jurisdictions with different compliance and/or reporting requirements increases the possibility that a healthcare company may run afoul of one or more of the requirements.
Environmental Matters
The manufacture of certain of our products, including our allograft implants and products, and the handling of materials used in the product testing process, including in our cadaveric laboratory, involve the controlled use of biological, hazardous and/or radioactive materials and wastes. Our business and facilities and those of our suppliers are subject to foreign, federal, state and local laws and regulations relating to the protection of human health and the environment, including those governing the use, manufacture, storage, handling and disposal of, and exposure to, such materials and wastes. In addition, under some environmental laws and regulations, we could be held responsible for costs relating to any contamination at our past or present facilities and at third-party waste disposal sites even if such contamination was not caused by us.
We are not currently aware of any material costs or liabilities relating to environmental matters, including any claims or actions under environmental laws or obligations to perform any cleanups at any of our facilities or any third-party waste disposal sites, that we expect to have a material adverse effect on our business, financial condition or operating results. However, it is possible that material environmental costs or liabilities may arise in the future.
Seasonality and Backlog
Our sales may be influenced by summer vacation and winter holiday periods during which we have experienced fewer spine surgeries taking place. In addition, we have recently experienced increased sales of our products in the last quarter of each year. Our sales generally consist of products that are in stock in our warehouse facilities or maintained at hospitals or with our sales representatives. Accordingly, we do not have a backlog of sales orders.
Employees
As of December 31, 2014, we had over 900 employees, including sales and marketing, product development, general administrative and accounting, both domestically and internationally. None of our employees is subject to a collective bargaining agreement and we consider our relationship with our employees to be good.
Facilities
As of December 31, 2014, our owned corporate headquarters in Audubon, Pennsylvania, comprised approximately 245,000 square feet. Our headquarters houses our research, product development, education, administration, warehouse and shipping functions, as well as our in-house manufacturing facility. In October 2014, we acquired a 13,000 square foot distribution center in Heerlen, Netherlands to support our international operations. Additionally, pursuant to our October 23, 2014 acquisition of Transplant Technologies of Texas, Ltd., we now lease approximately 20,000 square feet in San Antonio, Texas. We believe our facilities are adequate and suitable for our current needs.
Financial Information
For financial information about our business segment and the geographic areas in which we derive revenues, see “Item 8. Financial Statements and Supplementary Data; Notes to Consolidated Financial Statements; Note 17. Segment and Geographic Information” below.
Corporate and Available Information
We were incorporated in Delaware in March 2003. Our principal executive offices are located at 2560 General Armistead Avenue, Audubon, Pennsylvania 19403, and our telephone number at that location is (610) 930-1800. Our corporate website address is http://www.globusmedical.com. The information contained in or accessible through our website or contained on other websites is not deemed to be part of this Annual Report on Form 10-K.
We are subject to the filing requirements of the Exchange Act. Therefore, we file annual reports, periodic reports, proxy statements and other information with the SEC. Such reports, proxy statements and other information may be obtained by visiting the Public Reference Room of the Securities and Exchange Commission at 100 F Street, NE, Washington, D.C. 20549. You may obtain information regarding the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains a website (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically.
We make our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to such reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act available free of charge through a link on the Investors section of our website located at http://www.globusmedical.com (under “SEC Filings”) as soon as reasonably practicable after they are filed with or furnished to the SEC.
Item 1A. Risk Factors
Risk factors that could cause our actual results to differ from our expectations and that could negatively impact our business, results of operations and financial condition are discussed below and elsewhere in this Annual Report on Form 10-K. If any of these risks actually occurs, our business, results of operations, financial condition and future growth prospects could be materially and adversely affected. You should carefully read and consider each of these risks, together with all of the other information set forth in this Annual Report on Form 10-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently believe are immaterial may also materially adversely affect our business, results of operations, financial condition and future growth prospects, and our stock price.
Risks Related to Our Business and Our Industry
To be commercially successful, we must convince spine surgeons and hospitals that our products are an attractive alternative to our competitors’ products and that our Disruptive Technologies are an attractive alternative to existing surgical treatments of spine disorders.
Spine surgeons play a significant role in determining the course of treatment and, ultimately, the type of product that will be used to treat a patient, so we rely on effectively marketing to them. Hospitals, however, are also often actively involved in the evaluation of products and the decision of which product to purchase. In order for us to sell our products, we must convince spine surgeons and hospitals that our products are attractive alternatives to competing products for use in spine procedures. Acceptance of our products depends on educating spine surgeons and hospitals as to the distinctive characteristics, perceived benefits, safety and cost-effectiveness of our products as compared to our competitors’ products and on training spine surgeons in the proper application of our products. If we are not successful in convincing spine surgeons and hospitals of the merit of our products or educating them on the use of our products, they may not use our products and we will be unable to increase our sales and sustain growth or profitability.
Furthermore, we believe spine surgeons will not widely adopt our Disruptive Technology products unless they determine, based on experience, clinical data and published peer-reviewed journal articles, that MIS techniques and our motion preservation and advanced biomaterials technologies provide benefits or are an attractive alternative to conventional treatments of spine disorders and incorporate improved technologies that permit novel surgical procedures.
Surgeons, and in certain instances, hospitals, may be hesitant to change their medical treatment practices or the products available for use to treat patients for the following reasons, among others:
| |
• | lack of experience with MIS or our motion preservation or advanced biomaterials technologies; |
| |
• | lack or perceived lack of evidence supporting additional patient benefits; |
| |
• | perceived liability risks generally associated with the use of new products and procedures; |
| |
• | limited or lack of availability of coverage and reimbursement within healthcare payment systems; |
| |
• | costs associated with the purchase of new products and equipment; and |
| |
• | the time commitment that may be required for training. |
If we are unable to convince surgeons and hospitals to use our products, we will not achieve expected sales or sustain our growth, and our financial condition and results of operation may be adversely affected.
In addition, we believe recommendations and support of our products by influential spine surgeons are essential for market acceptance and adoption. If we do not receive support from such surgeons or long-term data does not show the benefits of using our products, surgeons may not use our products. In such circumstances, we may not achieve expected sales or sustain our growth and may be unable to maintain profitability.
Pricing pressure from our competitors and our customers may impact our ability to sell our products at prices necessary to support our current business strategies.
The spine industry is characterized by intense competition, and the spine market continues to attract numerous new companies and technologies, which has encouraged more established companies to intensify competitive pricing pressure. As a result of this increased competition, as well as the challenges of third-party coverage and reimbursement practices, we believe there will be continued pricing pressure in the future. If competitive forces drive down the prices we are able to charge for our products, our profit margins will
shrink, which will adversely affect our ability to maintain our profitability and to invest in and grow our business.
If our hospital and other healthcare provider customers are unable to obtain adequate coverage and reimbursement for their purchases of our products, we may not be able to sell our products at prices necessary to maintain our profitability or at all.
Maintaining and growing sales of our products depends on the availability of adequate coverage and reimbursement from third party payors, including government programs such as Medicare and Medicaid, private insurance plans and managed care programs. Hospitals and other healthcare providers that purchase our products generally rely on third party payors to cover all or part of the costs associated with the procedures performed with these products, including the cost to purchase the product. Our customers’ access to adequate coverage and reimbursement for the procedures performed with our products by government and private insurance plans is central to the acceptance of our current and future products. We may be unable to sell our products on a profitable basis, or at all, if third party payors deny coverage or reduce their current levels of payment. If our cost of production increases faster than increases in reimbursement levels for the products, our profitability may be negatively impacted.
Future action by CMS (which administers the Medicare program), other government agencies or private payors, may diminish payments to physicians, outpatient surgery centers and/or hospitals, which could harm our ability to market and sell our products. Private payors may adopt coverage decisions and payment amounts determined by CMS as guidelines in setting their coverage and reimbursement policies. Private payors that do not follow the Medicare guidelines may adopt different coverage and reimbursement policies for procedures performed with our products. In addition, for some governmental programs, such as Medicaid, coverage and reimbursement differs from state to state. Medicaid payments to physicians and facilities are often lower than payments by other third party payors and some state Medicaid programs may not pay an adequate amount for the procedures performed with our products, if any payment is made at all. Furthermore, the healthcare industry in the United States has experienced a trend toward cost containment as government and private insurers seek to control rising healthcare costs by imposing lower payment rates and negotiating reduced contract rates with service providers.
Third party payors, including public and private payors, may develop negative coverage policies impacting our products. For example, Aetna recently changed its medical policy from coverage in all or most cases to coverage only for limited indications for biomechanical devices (e.g., spine cages) for cervical fusion procedures, stating that they have not been proven more effective than bone graft for cervical fusions, which may limit demand for our products. In addition, some payors have changed their coverage policies to be more restrictive as to the criteria under which they will cover and reimburse for vertebral fusions in the lumbar spine to treat multilevel degenerative disc disease (“DDD”), initial primary laminectomy/discectomy for nerve root decompression, or spinal stenosis. Although these coverage policy changes have not had a material impact on our business, other insurers may adopt similar coverage decisions in the future. Patients covered by these insurers may be unwilling or unable to afford lumbar fusion surgeries to treat these conditions, which could materially harm or limit our ability to sell our products designed for lumbar fusion procedures. Our business would be negatively impacted if the trend by governmental agencies or third party payors continues to reduce coverage of and/or reimbursement for procedures using our products.
We cannot be certain that under current and future payment systems, such as those utilized by Medicare and in many private managed care systems, the cost of our products will be adequately incorporated into the overall cost of the procedure. Therefore, we cannot be certain that the procedures performed with our products will be reimbursed at a cost-effective level, or at all.
To the extent we sell our products internationally, market acceptance may depend, in part, upon the availability of coverage and reimbursement within prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country, and include both government-sponsored healthcare and private insurance. Our products may not obtain international coverage and reimbursement approvals in a timely manner, if at all. Our failure to receive such approvals would negatively impact market acceptance of our products in the international markets in which those approvals are sought.
The implementation of healthcare reform in the United States could have a material adverse effect on our business.
In March 2010, the PPACA was enacted into law in the United States. The PPACA includes provisions that, among other things, reduce and/or limit Medicare reimbursement, require all individuals to have health insurance (with limited exceptions) and impose new and/or increased taxes. Specifically, beginning in January 2013, the law imposed a 2.3% excise tax on the sale in the United States of certain medical devices by a manufacturer, producer or importer of such devices. During fiscal 2014, our medical device tax expense was $7.1 million. Although there are ongoing discussions in the U.S. Congress regarding the repeal or deferral of the medical device tax, there can be no assurances as to the outcome of any of these discussions. The PPACA also reduces Medicare and Medicaid payments to hospitals and clinical laboratories, which could reduce medical procedure volumes and impact the demand for our products or the prices at which we sell them. While this legislation is intended to expand health insurance coverage to uninsured persons in the United States, the impact of any overall increase in access to healthcare on sales of our products remains uncertain. Various healthcare reform proposals have also emerged at the state level. The impact of the PPACA and these proposals could have a material adverse effect on our business, results of operations, financial condition and cash flows.
If we are unable to maintain and expand our network of direct sales representatives and independent distributors, we may not be able to generate anticipated sales.
Our operating results are directly dependent upon the sales and marketing efforts of not only our employees, but also our independent distributors. We expect our direct sales representatives and independent distributors to develop long-lasting relationships with the surgeons they serve. If our direct sales representatives or independent distributors fail to adequately promote, market and sell our products, our sales could significantly decrease.
We face significant challenges and risks in managing our geographically dispersed distribution network and retaining the individuals who make up that network. If any of our direct sales representatives were to leave us, or if any of our independent distributors were to cease to do business with us, our sales could be adversely affected. Some of our independent distributors account for a significant portion of our sales volume, and if any such independent distributor were to cease to distribute our products, our sales could be adversely affected. In such a situation, we may need to seek alternative independent distributors or increase our reliance on our direct sales representatives, which may not prevent our sales from being adversely affected. If a direct sales representative or independent distributor were to depart and be retained by one of our competitors, we may be unable to prevent them from helping competitors solicit business from our existing customers, which could further adversely affect our sales. Because of the intense competition for their services, we may be unable to recruit or retain additional qualified independent distributors or to hire additional direct sales representatives to work with us. We may not be able to enter into agreements with them on favorable or commercially reasonable terms, if at all. Failure to hire or retain qualified direct sales representatives or independent distributors would prevent us from maintaining or expanding our business and generating sales.
As we launch new products and increase our marketing efforts with respect to existing products, we will need to expand the reach of our marketing and sales networks. Our future success will depend largely on our ability to continue to hire, train, retain and motivate skilled direct sales representatives and independent distributors with significant technical knowledge in various areas, such as spinal care practices, spine injuries and disease and spinal health. New hires require training and take time to achieve full productivity. If we fail to train new hires adequately, or if we experience high turnover in our sales force in the future, we cannot be certain that new hires will become as productive as may be necessary to maintain or increase our sales.
If we are unable to expand our sales and marketing capabilities domestically and internationally, we may not be able to effectively commercialize our products, which would adversely affect our business, results of operations and financial condition.
We operate in a very competitive business environment and if we are unable to compete successfully against our existing or potential competitors, our sales and operating results may be negatively affected and we may not grow.
The spine industry is intensely competitive, subject to rapid change and highly sensitive to the introduction of new products or other market activities of industry participants. We believe that our significant competitors are Medtronic, the DePuy Synthes Companies (a division of Johnson & Johnson), Stryker and NuVasive. Alphatec Spine, Orthofix International, Zimmer, LDR Holding, Biomet, K2M and other smaller public and private companies are also competitors of ours. At any time, these or other industry participants may develop alternative treatments, products or procedures for the treatment of spine disorders that compete directly or indirectly with our products. They may also develop and patent processes or products earlier than we can or obtain regulatory clearance or approvals for competing products more rapidly than we can, which could impair our ability to develop and commercialize similar processes or products. If alternative treatments are, or are perceived to be, superior to our spine surgery products, sales of our products could be negatively affected and our results of operations could suffer.
Many of our current and potential competitors are major medical device companies that have substantially greater financial, technical and marketing resources than we do, and they may succeed in developing products that would render our products obsolete or noncompetitive.
Many of our larger competitors enjoy several competitive advantages over us, including:
| |
• | greater financial, human and other resources for product research and development, sales and marketing and litigation; |
| |
• | significantly greater name recognition; |
| |
• | established relationships with spine surgeons, hospitals and other healthcare providers; |
| |
• | large and established sales and marketing and distribution networks; |
| |
• | products supported by long-term clinical data; |
| |
• | greater experience in obtaining and maintaining regulatory clearances or approvals for products and product enhancements; |
| |
• | more expansive portfolios of intellectual property rights; and |
| |
• | greater ability to cross-sell their products or to incentivize hospitals or surgeons to use their products. |
The frequent introduction by competitors of products that compete with our existing or planned products may also make it difficult to market or sell our products. In addition, the entry of multiple new products and competitors, including physician-owned distributorships (“PODs”), may lead some of our
competitors to employ pricing strategies that could adversely affect the pricing of our products and pricing in the spine market generally.
As a result, our ability to compete successfully will depend on our ability to develop proprietary products that reach the market in a timely manner, receive adequate coverage and reimbursement from third-party payors, and are safer, less invasive and more effective than alternatives available for similar purposes. If we are unable to do so, our sales or margins could decrease, thereby harming our business.
We are dependent on a limited number of third-party suppliers for most of our products and components, and the loss of any of these suppliers, or their inability to provide us with an adequate supply of materials, could harm our business.
We rely on third-party suppliers to supply substantially all of our products. For us to be successful, our suppliers must be able to provide us with products and components in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and on a timely basis. Our anticipated growth could strain the ability of our suppliers to deliver an increasingly large supply of products, materials and components. Other issues, including shortages of raw materials or components, problems with production yields and quality control and assurance, especially with products such as allograft, which is processed human tissue, could impair a supplier’s ability to supply us with product quantities necessary to support our sales. Furthermore, under our supplier agreements, our suppliers generally have no obligation to manufacture for us or sell to us any specific quantity of products. If we are unable to obtain sufficient quantities of high quality components to meet demand on a timely basis, we could lose customers, our reputation may be harmed and our business could suffer.
We generally use a small number of suppliers for each of our products. Our dependence on such a limited number of suppliers exposes us to risks, including limited control over pricing, availability, quality and delivery schedules. If any one or more of our suppliers cease to provide us with sufficient quantities of manufactured products in a timely manner or on terms acceptable to us, or cease to manufacture components of acceptable quality, we would have to seek alternative sources of supply. Because of the nature of our internal quality control requirements, regulatory requirements and the custom and proprietary nature of the parts, we cannot quickly engage additional or replacement suppliers for many of our critical components. Failure of any of our third-party suppliers to deliver products at the level our business requires would limit our ability to meet our sales commitments to our customers and could have a material adverse effect on our business. We may also have difficulty obtaining similar components from other suppliers that are acceptable to the FDA or other foreign regulatory authorities. We could incur delays while we locate and engage qualified alternative suppliers, and we may be unable to engage alternative suppliers on favorable terms or at all. Any such disruption or increased expenses could harm our commercialization efforts and adversely affect our ability to generate sales.
If we do not successfully implement our business strategy, our business and results of operations will be adversely affected.
Our business strategy was formed based on assumptions about the spine market that might prove wrong. We believe that various demographics and industry-specific trends, including the aging of the general population, increasingly active lifestyles, improving fusion technologies and increasing acceptance of Disruptive Technologies leading to earlier interventions, will help drive growth in the spine market and our business, but these demographics and trends are uncertain. Actual demand for our products could differ materially from projected demand if our assumptions regarding these factors prove to be incorrect or do not materialize, or if alternative treatments to those offered by our products gain widespread acceptance.
We may not be able to successfully implement our business strategy. To implement our business strategy we need to, among other things, strengthen our brand, develop and introduce new spine surgery products, find new applications for and improve our existing products, obtain regulatory clearance or approval for new products and applications and educate spine surgeons about the clinical and cost benefits of our products, all of which we believe could increase acceptance of our products by spine surgeons. Our strategy of focusing exclusively on the spine market may limit our ability to grow. In addition, we are seeking to increase our sales and, in order to do so, will need to commercialize additional products and expand our direct and distributor sales forces in existing and new territories, all of which could result in our becoming subject to additional or different foreign and domestic regulatory requirements, with which we may not be able to comply. Moreover, even if we successfully implement our business strategy, our operating results may not improve or may decline. We may decide to alter or discontinue aspects of our business strategy and may adopt different strategies due to business or competitive factors not currently foreseen, such as new medical technologies that would make our products obsolete. Any failure to implement our business strategy may adversely affect our business, results of operations and financial condition.
The proliferation of PODs could result in increased pricing pressure on our products or harm our ability to sell our products to physicians who own or are affiliated with those distributorships.
PODs are medical device distributors that are owned, directly or indirectly, by physicians. These physicians derive a proportion of their revenue from selling or arranging for the sale of medical devices for use in procedures they perform on their own patients at hospitals that agree to purchase from or through the POD, or that otherwise furnish ordering physicians with income that is based directly or indirectly on those orders of medical devices.
We do not sell or distribute any of our products through PODs. The number of PODs in the spine industry may continue to grow as economic pressures increase throughout the industry, as hospitals, insurers and physicians search for ways to reduce costs, and, in the case of the physicians, search for ways to increase their incomes. These companies and the physicians who own, or partially own, them have significant market knowledge and access to the surgeons who use our products and the hospitals that purchase our products, and growth in this area may reduce our ability to compete effectively for business from surgeons who own such distributorships.
Our business could suffer if we lose the services of key members of our senior management, key advisors or personnel.
We are dependent upon the continued services of key members of our senior management and a limited number of key advisors and personnel. In particular, we are highly dependent on the skills and leadership of our Chief Executive Officer (“CEO”), David C. Paul. The loss of any one of these individuals could disrupt our operations or our strategic plans. Additionally, our future success will depend on, among other things, our ability to continue to hire and retain the necessary qualified scientific, technical and managerial personnel, for whom we compete with numerous other companies, academic institutions and organizations. The loss of members of our management team, key advisors or personnel, or our inability to attract or retain other qualified personnel or advisors, could have a material adverse effect on our business, results of operations and financial condition. Though members of our sales force generally enter into noncompetition agreements that restrict their ability to compete with us, most of the members of our executive management team are not subject to such agreements. Accordingly, the adverse effect resulting from the loss of certain executives could be compounded by our inability to prevent them from competing with us.
The safety and efficacy of our products is not yet supported by long-term clinical data, which could limit sales, and our products might therefore prove to be less safe and effective than initially thought.
All of the products we currently market in the United States, other than our SECURE®-C cervical disc, have either received pre-market clearance under Section 510(k) of the FDCA or are exempt from pre-market review. The FDA's 510(k) clearance process requires us to show that our proposed product is “substantially equivalent” to another 510(k)-cleared product. This process is shorter and typically requires the submission of less supporting documentation than other FDA approval processes and does not always require long-term clinical studies. We also continue to gather long term follow-up data in our SECURE®-C clinical trial. Additionally, to date, we have not been required to complete long-term clinical studies in connection with the sale of our products outside the United States. As a result, we currently lack the breadth of published long-term clinical data supporting the safety and efficacy of virtually all of our products and the benefits they offer that might have been generated in connection with other approval processes. For these reasons, spine surgeons may be slow to adopt our products, we may not have comparative data that our competitors have or are generating, and we may be subject to greater regulatory and product liability risks. Further, future patient studies or clinical experience may indicate that treatment with our products does not improve patient outcomes. Such results would slow the adoption of our products by spine surgeons, significantly reduce our ability to achieve expected sales, and could prevent us from sustaining our profitability.
Moreover, if future results and experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to mandatory product recalls, suspension or withdrawal of FDA clearance or approval, significant legal liability or harm to our business reputation.
If we do not enhance our product offerings through our research and development efforts, we may be unable to effectively compete.
In order to increase our market share in the spine market, we must enhance and broaden our product offerings in response to changing customer demands and competitive pressures and technologies. The success of any new product offering or enhancement to an existing product will depend on numerous factors, including our ability to:
| |
• | properly identify and anticipate surgeon and patient needs; |
| |
• | develop and introduce new products or product enhancements in a timely manner; |
| |
• | adequately protect our intellectual property and avoid infringing upon the intellectual property rights of third parties; |
| |
• | demonstrate the safety and efficacy of new products; and |
| |
• | obtain the necessary regulatory clearances or approvals for new products or product enhancements. |
If we do not develop and obtain regulatory clearance or approval for new products or product enhancements in time to meet market demand, or if there is insufficient demand for these products or enhancements, our results of operations will suffer. Our research and development efforts may require a substantial investment of time and resources before we are adequately able to determine the commercial viability of a new product, technology, material or other innovation. In addition, even if we are able to successfully develop enhancements or new generations of our products, these enhancements or new generations of products may not produce sales in excess of the costs of development and they may be quickly rendered obsolete by changing customer preferences or the introduction by our competitors of products embodying new technologies or features.
If we fail to properly manage our anticipated growth, our business could suffer.
Our rapid growth has placed, and will continue to place, a significant strain on our management and on our operational and financial resources and systems. Failure to manage our growth effectively could cause us to over-invest or under-invest in infrastructure, and result in losses or weaknesses in our infrastructure, which could materially adversely affect us. Additionally, our anticipated growth will increase the demands placed on our suppliers, resulting in an increased need for us to carefully monitor for quality assurance. Any failure by us to manage our growth effectively could have an adverse effect on our ability to achieve our development and commercialization goals.
Our results of operations could suffer if we are unable to manage our planned international expansion effectively.
Expansion into international markets is an element of our business strategy and involves risk. The sale and shipment of our products across international borders, as well as the purchase of components and products from international sources, subject us to extensive U.S. and foreign governmental trade, import and export and customs regulations and laws. Compliance with these regulations and laws is costly and exposes us to penalties for non-compliance. Other laws and regulations that can significantly affect us include various anti-bribery laws, including the FCPA and anti-boycott laws. Any failure to comply with applicable legal and regulatory obligations in the United States or abroad could adversely affect us in a variety of ways that include, but are not limited to, significant criminal, civil and administrative penalties, including imprisonment of individuals, fines and penalties, denial of export privileges, seizure of shipments and restrictions on certain business activities. Also, the failure to comply with applicable legal and regulatory obligations could result in the disruption of our distribution and sales activities.
Our international operations expose us and our independent distributors to risks inherent in operating in foreign jurisdictions, including:
| |
• | exposure to different legal and regulatory standards; |
| |
• | lack of stringent protection of intellectual property; |
| |
• | obstacles to obtaining domestic and foreign export, import and other governmental approvals, permits and licenses and compliance with foreign laws; |
| |
• | potentially adverse tax consequences and the complexities of foreign value-added tax systems; |
| |
• | adverse changes in tariffs and trade restrictions; |
| |
• | limitations on the repatriation of earnings; |
| |
• | difficulties in staffing and managing foreign operations; |
| |
• | transportation delays and difficulties of managing international distribution channels; |
| |
• | longer collection periods and difficulties in collecting receivables from foreign entities; |
| |
• | increased financing costs; and |
| |
• | political, social and economic instability and increased security concerns. |
These risks may limit or disrupt our expansion, restrict the movement of funds or result in the deprivation of contractual rights or the taking of property by nationalization or expropriation without fair compensation.
Our goal of succeeding as an international company depends, in part, on our ability to develop and implement policies and strategies that are effective in anticipating and managing these and other risks in the countries in which we do business. Failure to manage these and other risks may have a material adverse effect on our operations in any particular country and on our business as a whole.
We may seek to grow our business through acquisitions of or investments in new or complementary businesses, products or technologies, and the failure to manage acquisitions or investments, or the failure to integrate them with our existing business, could have a material adverse effect on us.
From time to time we expect to consider opportunities to acquire or make investments in other technologies, products and businesses that may enhance our capabilities, complement our current products or expand the breadth of our markets or customer base. Potential and completed acquisitions and strategic investments involve numerous risks, including:
| |
• | problems assimilating the purchased technologies, products or business operations; |
| |
• | issues maintaining uniform standards, procedures, controls and policies; |
| |
• | unanticipated costs associated with acquisitions; |
| |
• | diversion of management’s attention from our core business; |
| |
• | adverse effects on existing business relationships with suppliers and customers; |
| |
• | risks associated with entering new markets in which we have limited or no experience; |
| |
• | potential loss of key employees of acquired businesses; and |
| |
• | increased legal and accounting compliance costs. |
We do not know if we will be able to identify acquisitions we deem suitable, whether we will be able to successfully complete any such acquisitions on favorable terms or at all, or whether we will be able to successfully integrate any acquired business, product or technology into our business or retain any key personnel, suppliers or distributors. Our ability to successfully grow through acquisitions depends upon our ability to identify, negotiate, complete and integrate suitable target businesses and to obtain any necessary financing. These efforts could be expensive and time-consuming, and may disrupt our ongoing business and prevent management from focusing on our operations. If we are unable to integrate any acquired businesses, products or technologies effectively, our business, results of operations and financial condition will be materially adversely affected.
We are required to maintain high levels of inventory, which could consume a significant amount of our resources and reduce our cash flows.
As a result of the need to maintain substantial levels of inventory, we are subject to the risk of inventory obsolescence. Many of our products come in sets, which feature components in a variety of sizes to satisfy the particular patient’s anatomical needs. In order to market our products effectively, we often must maintain implant sets consisting of the full range of product sizes. For each surgery, fewer than all of the components of the set are used, and therefore certain portions of the set, like uncommon sizes, may become obsolete before they can be used. In the event that a substantial portion of our inventory becomes obsolete, it could have a material adverse effect on our earnings and cash flows due to the resulting costs associated with the inventory impairment charges and costs required to replace such inventory.
If we experience significant disruptions in our information technology systems, our business, results of operations and financial condition could be adversely affected.
The efficient operation of our business depends on our information technology systems. We rely on our information technology systems to effectively manage:
| |
• | sales and marketing, accounting and financial functions; |
| |
• | engineering and product development tasks; and |
| |
• | our research and development data. |
Our information technology systems are vulnerable to damage or interruption from:
| |
• | earthquakes, fires, floods and other natural disasters; |
| |
• | terrorist attacks and attacks by computer viruses or hackers; |
| |
• | computer systems, or Internet, telecommunications or data network failures. |
The failure of our information technology systems to perform as we anticipate or our failure to effectively implement new systems could disrupt our entire operation and could result in decreased sales, increased overhead costs, excess inventory and product shortages, all of which could have a material adverse effect on our reputation, business, results of operations and financial condition.
Consolidation in the healthcare industry could lead to demands for price concessions or to the exclusion of some suppliers from certain of our markets, which could have an adverse effect on our business, results of operations or financial condition.
Because healthcare costs have risen significantly over the past decade, numerous initiatives and reforms initiated by legislators, regulators and third-party payors to curb these costs have resulted in a consolidation trend in the healthcare industry to aggregate purchasing power. As the healthcare industry consolidates, competition to provide products and services to industry participants has become and will continue to become more intense. This in turn has resulted and will likely continue to result in greater pricing pressures and the exclusion of certain suppliers from important market segments as group purchasing organizations, independent delivery networks and large single accounts continue to use their market power to consolidate purchasing decisions for hospitals. We expect that market demand, government regulation, third-party coverage and reimbursement policies and societal pressures will continue to change the worldwide healthcare industry, resulting in further business consolidations and alliances among our customers, which may reduce competition, exert further downward pressure on the prices of our products and may adversely impact our business, results of operations or financial condition.
Fluctuations in insurance cost and availability could adversely affect our profitability or our risk management profile.
We hold a number of insurance policies, including product liability insurance, directors’ and officers’ liability insurance, property insurance, health insurance and workers’ compensation insurance. If the costs of maintaining adequate insurance coverage increase significantly in the future, our operating results could be materially adversely affected. Likewise, if any of our current insurance coverage should become unavailable to us or become economically impractical, we would be required to operate our business without indemnity from commercial insurance providers. If we operate our business without insurance, we could be responsible for paying claims or judgments against us that would have otherwise been covered by insurance, which could adversely affect our results of operations or financial condition.
Risks Related to our Legal and Regulatory Environment
Our medical device products and operations are subject to extensive governmental regulation both in the United States and abroad, and our failure to comply with applicable requirements could cause our business to suffer.
The medical device industry is regulated extensively by governmental authorities, principally the FDA and corresponding state and foreign regulatory agencies. The FDA and other U.S. and foreign governmental agencies regulate, among other things, with respect to medical devices:
| |
• | design, development and manufacturing; |
| |
• | testing, labeling, content and language of instructions for use and storage; |
| |
• | marketing, sales and distribution; |
| |
• | pre-market clearance and approval; |
| |
• | record keeping procedures; |
| |
• | advertising and promotion; |
| |
• | recalls and field safety corrective actions; |
| |
• | post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury; |
| |
• | post-market approval studies; and |
| |
• | product import and export. |
The regulations to which we are subject are complex and have tended to become more stringent over time; see “Item 1. Business; Government Regulation” for a summary of certain regulations to which we are subject. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales.
The processes by which 510(k) clearance or PMA approval is obtained can be expensive and lengthy and require the payment of significant fees. The FDA’s 510(k) clearance process usually takes from three to 12 months, but may last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes one to three years, or even longer, from the time the application is submitted to the FDA until an approval is obtained. The process of obtaining regulatory clearances or approvals through the 510(k) process or approvals through the PMA process to market a medical device in the United States or internationally can be costly and time-consuming, and we may not be able to obtain these clearances or approvals on a timely basis, if at all.
In the United States, all of our currently commercialized medical device products, other than SECURE®-C have either received pre-market clearance under Section 510(k) of the FDCA or are exempt from pre-market review. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, our product introductions or modifications could be delayed or canceled, which could cause our sales to decline and potentially harm our ability to compete. In addition, if the FDA disagrees with our determination that a product we currently market is subject to an exemption from pre-market review, the FDA may require us to submit a 510(k) or PMA and may require us to cease distribution of the product and/or recall the product unless and until we obtain 510(k) clearance or PMA. Further, even with respect to those future products where a PMA is not required, we cannot assure you that we will be able to obtain the 510(k) clearances with respect to those products. The FDA may also reclassify devices currently on the market from Class II to Class III, which could result in additional regulatory burden requiring PMA prior to marketing, or could result in FDA rescinding a 510(k) for a previously cleared device.
The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:
| |
• | we may not be able to demonstrate to the FDA’s satisfaction that our products are safe and effective for their intended uses; |
| |
• | the data from our pre-clinical studies and clinical trials may be insufficient to support clearance or approval, where required; and |
| |
• | the manufacturing process or facilities we use may not meet applicable requirements. |
In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently approved or cleared products on a timely basis. It is also possible that, if we obtain new FDA regulatory clearances or approvals, the clearances or approvals may contain limitations on the indicated uses or may prohibit certain uses which may impact the marketability of the product.
Any delay in, or failure to receive or maintain, clearance or approval for our medical device products under development could prevent us from generating revenue from these products or achieving profitability. Additionally, the FDA and other regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some surgeons from using our products and adversely affect our reputation and the perceived safety and efficacy of our products.
In addition, even after we have obtained the proper regulatory approval to market a product, the FDA has the power to require us to conduct postmarketing studies. For example, the FDA issued a 522 Order in October 2009 requiring companies that market dynamic stabilization systems, such as our TRANSITION® system, to conduct postmarketing studies on those systems. These studies can be very expensive and time-consuming to conduct. Failure to comply with those studies in a timely manner could result in the revocation of the 510(k) clearance for the product that is subject to such a 522 Order and the recall or withdrawal of the product, which could prevent us from generating sales from that product in the United States.
Similarly, we must comply with numerous international laws and regulations in order to market our products outside of the United States; see “Item 1. Business; Government Regulation; International” for a summary of certain international laws and regulations to which we are subject. As is the case in the United States, the applicable regulatory body may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently approved or cleared products on a timely basis. Any delay in, or failure to receive or maintain, clearance or approval for our products under development could prevent us from generating revenue from these products or achieving profitability. Conducting clinical studies to obtain clinical data that might be required as part of the clinical evaluation process can be expensive and time-consuming. Additionally, the regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some surgeons from using our products and adversely affect the perceived safety and efficacy of our products and our reputation.
Failure to comply with applicable regulations could jeopardize our ability to sell our products and result in enforcement actions such as:
| |
• | termination of distribution; |
| |
• | recalls or seizures of products; |
| |
• | delays in the introduction of products into the market; |
| |
• | total or partial suspension of production; |
| |
• | refusal of the FDA or other regulator to grant future clearances or approvals; |
| |
• | withdrawals or suspensions of current clearances or approvals, resulting in prohibitions on sales of our products; and/or |
| |
• | in the most serious cases, criminal penalties. |
Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, results of operations and financial condition. For example, in February 2012 we executed a settlement agreement with the FDA in which we and our CEO, David C. Paul, agreed to pay a total of $1.0 million in exchange for the FDA’s release of claims related solely to the FDA’s determination that we failed to obtain the 510(k) clearance required for the sale of our NUBONE® product, which we ceased selling in the United States in December 2010.
Modifications to our products may require new 510(k) clearances or PMAs, or may require us to cease marketing or recall the modified products until clearances are obtained.
Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness or that would constitute a major change in its intended use, design, or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. We have modified some of our 510(k) cleared products, and have determined based on our review of the applicable FDA guidance that in certain instances new 510(k) clearances or PMAs are not required. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications or PMAs for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties.
Recent changes to FDA’s 510(k) program may make it more difficult for us to gain FDA clearance for our products, by imposing more onerous acceptance and review requirements for new 510(k) submissions , and future changes may further increase this burden.
Our HCT/P products are subject to extensive government regulation and our failure to comply with these requirements could cause our business to suffer.
In the United States, we are marketing our human tissue products as Section 361 HCT/Ps, which are not subject to FDA premarket clearance or approval requirements. The FDA could disagree with our determination that our human tissue products are Section 361 HCT/Ps and could determine that these products are biologics requiring a biological license application (“BLA”) approval or medical devices requiring 510(k) clearance or PMA approval. FDA may then require that we cease marketing our human tissue products and/or recall the products unless and until we receive the appropriate clearance or approval from FDA.
HCT/Ps also are subject to donor eligibility and screening, CGTPs, product labeling, and postmarket reporting requirements. If we or our suppliers fail to comply with these requirements, we could be subject to FDA enforcement action, including, for example, warning letters, fines, injunctions, product recalls or seizures, and, in the most serious cases, criminal penalties.
We may fail to obtain or maintain foreign regulatory approvals to market our products in other countries.
We currently market our products internationally and intend to expand our international marketing. International jurisdictions require separate regulatory approvals and compliance with numerous and varying regulatory requirements. For example, we intend to continue to seek regulatory clearance to market our primary products in the EEA, Brazil, Canada and other key markets. The approval procedures vary among countries and may involve requirements for additional testing, and the time required to obtain approval may differ from country to country and from that required to obtain FDA clearance or approval.
Clearance or approval by the FDA does not ensure approval or certification by regulatory authorities in other countries or jurisdictions, and approval or certification by one foreign regulatory authority does not ensure approval or certification by regulatory authorities in other foreign countries or by the FDA. The foreign regulatory approval or certification process may include all of the risks associated with obtaining FDA clearance or approval. We may not obtain foreign regulatory approvals on a timely basis, if at all. We may not be able to file for regulatory approvals or certifications and may not receive necessary approvals to commercialize our products in any market. If we fail to receive necessary approvals or certifications to commercialize our products in foreign jurisdictions on a timely basis, or at all, our business, results of operations and financial condition could be adversely affected.
Additionally, in the EEA, we must inform the Notified Body that carried out the conformity assessment of the medical devices we market or sell in the EEA of any planned substantial changes to our quality system or changes to our devices which could affect compliance with the essential requirements or the devices’ intended use. The Notified Body will then assess the changes and verify whether they affect the products’ conformity. If the assessment is not favorable, it could prevent us from selling that product in the EEA, which could adversely impact our business and results of operations.
We are subject to risks associated with our non-U.S. operations.
The FCPA and similar worldwide anti-bribery laws in non-U.S. jurisdictions generally prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business. The FCPA also imposes accounting standards and requirements on publicly traded U.S. corporations and their foreign affiliates, which are intended to prevent the diversion of corporate funds to the payment of bribes and other improper payments, and to prevent the establishment of “off books” slush funds from which such improper payments can be made. Because of the predominance of government-sponsored healthcare systems around the world, many of our customer relationships outside of the United States are with governmental entities and are therefore subject to such anti-bribery laws. Our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employees or agents. Violations of these laws, or allegations of such violations, could disrupt our operations, involve significant management distraction and result in a material adverse effect on our business, results of operations and financial condition. We also could suffer severe penalties, including criminal and civil penalties, disgorgement and other remedial measures, including further changes or enhancements to our procedures, policies and controls, as well as potential personnel changes and disciplinary actions.
Furthermore, we are subject to the export controls and economic embargo rules and regulations of the United States, including, but not limited to, the Export Administration Regulations and trade sanctions against embargoed countries, which are administered by the Office of Foreign Assets Control within the Department of the Treasury, as well as the laws and regulations administered by the Department of Commerce. These regulations limit our ability to market, sell, distribute or otherwise transfer our products or technology to prohibited countries or persons. A determination that we have failed to comply, whether knowingly or inadvertently, may result in substantial penalties, including fines and enforcement actions and civil and/or criminal sanctions, the disgorgement of profits and the imposition of a court-appointed monitor, as well as the denial of export privileges, and may have an adverse effect on our reputation.
These and other factors may have a material adverse effect on our international operations or on our business, results of operations and financial condition generally.
If we or our suppliers fail to comply with the FDA’s good manufacturing practice regulations and similar international regulations, this could impair our ability to market our products in a cost-effective and timely manner.
We and our third-party suppliers are required to comply with Quality System Regulations (“QSRs”), which cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of our products. In addition, suppliers and processors of allograft must comply with the CGTPs, which govern the methods used in and the facilities and controls used for the manufacture of human cell tissue and cellular and tissue-based products, record-keeping and the establishment of a quality program.
The FDA audits compliance with the QSRs and CGTPs through periodic announced and unannounced inspections of manufacturing and other facilities. The FDA may conduct inspections or audits at any time. If we or our suppliers have significant non-compliance issues or if any corrective action plan that we or our suppliers propose in response to observed deficiencies is not sufficient, the FDA could take enforcement action, including any of the following sanctions:
| |
• | untitled letters, warning letters, fines, injunctions, consent decrees and civil penalties; |
| |
• | customer notifications or repair, replacement, refunds, recall, detention or seizure of our products; |
| |
• | operating restrictions or partial suspension or total shutdown of production; |
| |
• | refusing or delaying our requests for 510(k) clearance or PMA of new products or modified products; |
| |
• | withdrawing 510(k) clearances or PMAs that have already been granted; |
| |
• | refusal to grant export approval for our products; or |
Any of these sanctions could have a material adverse effect on our reputation, business, results of operations and financial condition.
Outside the United States, our products and operations are also often required to comply with standards set by industrial standards bodies, such as the ISO. Foreign regulatory bodies may evaluate our products or the testing that our products undergo against these standards. The specific standards, types of evaluation and scope of review differ among foreign regulatory bodies. We intend to comply with the standards enforced by such foreign regulatory bodies as needed to commercialize our products. If we fail to adequately comply with any of these standards, a foreign regulatory body may take adverse actions similar to those within the power of the FDA. Any such action may harm our reputation and business, and could have an adverse effect on our business, results of operations and financial condition.
A recall of our products, either voluntarily or at the direction of the FDA or another governmental authority, or the discovery of serious safety issues with our products, could have a significant adverse impact on us.
The FDA and similar foreign governmental authorities have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture or in the event that a product poses an unacceptable risk to health. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found. A government-mandated or voluntary recall by us or one of our distributors could occur as a result of an unacceptable risk to health, component failures, manufacturing errors, design or labeling defects or other deficiencies and issues. Recalls of any of our products would divert managerial and financial resources and have an adverse effect on our reputation, results of operations and financial condition, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. We may also be required to bear other
costs or take other actions that may have a negative impact on our future sales and our ability to generate profits.
In the EEA, we must comply with the EU Medical Device Vigilance System. Under this system, manufacturers are required to take Field Safety Corrective Actions (“FSCAs”) to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. A FSCA may include the recall, modification, exchange, destruction or retrofitting of the device.
Any adverse event involving our products, whether in the United States or abroad, could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection, mandatory recall or other enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.
We may be subject to enforcement action if we engage in the off-label promotion of our products.
Our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition of the promotion of off-label use. Physicians may use our products off-label, as the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. However, if the FDA determines that our promotional efforts constitutes promotion of an off-label use, it could request that we modify our training or promotional efforts or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities, such as the Department of Justice (“DOJ”), might take action if they consider our promotional or training materials to constitute promotion of an unapproved/off-label use, which could result in significant criminal and/or civil fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement (e.g., the False Claims Act). In that event, our reputation could be damaged and adoption of the products would be impaired. Although our policy is to refrain from statements that could be considered off-label promotion of our products, the FDA or another regulatory agency could disagree and conclude that we have engaged in off-label promotion. In addition, the off-label use of our products may increase the risk of injury to patients, and, in turn, the risk of product liability claims. Product liability claims are expensive to defend and could divert our management’s attention, result in substantial damage awards against us and harm our reputation.
Governmental regulation and limited sources and suppliers could restrict our procurement and use of tissue.
In the United States, the procurement and transplantation of allograft bone tissue is subject to federal law pursuant to the NOTA, a criminal statute which prohibits the purchase and sale of human organs used in human transplantation, including bone and related tissue, for “valuable consideration.” NOTA permits reasonable payments associated with the removal, transportation, processing, preservation, quality control, implantation and storage of human bone tissue. We provide services in all of these areas in the United States, with the exception of removal and implantation, and receive payments for all such services. We make payments to tissue banks for their services related to recovering allograft bone tissue on our behalf. If NOTA is interpreted or enforced in a manner that prevents us from receiving payment for services we render or that prevents us from paying tissue banks or certain of our clients for the services they render for us, our business could be materially adversely affected.
We depend on a limited number of sources of human tissue for use in some of our advanced biomaterials products and a limited number of entities to process the human tissue for use in those advanced biomaterials products, and any failure to obtain tissue from these sources or to have the tissue processed by these entities for us in a timely manner will interfere with our ability to effectively meet demand for our advanced biomaterials products incorporating human tissue. Less than five third-party suppliers currently supply all of our needs for allograft implants and products, other than those implants and products that we process ourselves. The processing of human tissue into our advanced biomaterials products is very labor-intensive and it is therefore difficult to maintain a steady supply stream. In addition, due to seasonal changes in mortality rates, some scarce tissues used in our advanced biomaterials products are at times in particularly short supply. We cannot be certain that our current supply of human tissue and allograft implants, plus any additional source that we identify in the future, will be sufficient to meet our needs. Our dependence on a small number of third-party suppliers and the challenges we may face in obtaining adequate supplies of human tissue involve several risks, including limited control over pricing, availability, quality and delivery schedules. In addition, any interruption in the supply of any human tissue component could materially harm our and our third-party suppliers’ ability to manufacture our advanced biomaterials products until a new source of supply, if any, could be found. We may be unable to find a sufficient alternative supply channel in a reasonable time period or on commercially reasonable terms, if at all, which would have a material adverse effect on our business, results of operations and financial condition.
Negative publicity concerning methods of tissue recovery and screening of donor tissue in our industry could reduce demand for our advanced biomaterials products and impact the supply of available donor tissue.
Media reports or other negative publicity concerning both alleged improper methods of tissue recovery from donors and disease transmission from donated tissue could limit widespread acceptance of some of our advanced biomaterials products. Unfavorable reports of improper or illegal tissue recovery practices, both in the United States and internationally, as well as incidents of improperly processed tissue leading to the transmission of disease, may broadly affect the rate of future tissue donation and market acceptance of technologies incorporating human tissue. In addition, such negative publicity could cause the families of potential donors to become reluctant to agree to donate tissue to for-profit tissue processors. For example, the media has reported examples of alleged illegal harvesting of body parts from cadavers and resulting recalls conducted by certain companies selling human tissue based products affected by the alleged illegal harvesting. These reports and others could have a negative effect on our tissue regeneration business.
We are subject to environmental laws and regulations that can impose significant costs and expose us to potential financial liabilities.
The manufacture of certain of our products, including our allograft implants and products, and the handling of materials used in the product testing process, including in our cadaveric laboratory, involve the controlled use of biological, hazardous and/or radioactive materials and wastes. Our business and facilities and those of our suppliers are subject to foreign, federal, state and local laws and regulations relating to the protection of human health and the environment, including those governing the use, manufacture, storage, handling and disposal of, and exposure to, such materials and wastes. In addition, under some environmental laws and regulations, we could be held responsible for costs relating to any contamination at our past or present facilities and at third-party waste disposal sites even if such contamination was not caused by us. A failure to comply with current or future environmental laws and regulations could result in severe fines or penalties. Any such expenses or liability could have a significant negative impact on our business, results of operations and financial condition.
We or our suppliers may be the subject of claims for non-compliance with FDA regulations in connection with the processing, manufacturing or distribution of our proposed allograft or other advanced biomaterials implants and products.
Allegations may be made against us or against donor recovery groups or tissue banks, including those with which we have a contractual supplier relationship, claiming that the acquisition or processing of tissue for allograft implants and products or other advanced biomaterials products does not comply with applicable FDA regulations or other relevant statutes and regulations. Allegations like these could cause regulators or other authorities to take investigative or other action against us or our suppliers, or could cause negative publicity for us or our industry generally. These actions or any negative publicity could cause us to incur substantial costs, divert the attention of our management from our business and harm our reputation.
We and our distributor sales representatives might be subject to claims for failing to comply with U.S. federal, state and foreign fraud and abuse laws, including anti-kickback laws and other anti-referral laws.
There are numerous U.S. federal and state laws pertaining to healthcare fraud and abuse, including anti-kickback laws and physician self-referral laws. Our relationships with surgeons, hospitals and our independent distributors are subject to scrutiny under these laws. Violations of these laws are punishable by criminal and civil sanctions, including, in some instances, imprisonment and exclusion from participation in federal and state healthcare programs, including the Medicare, Medicaid and Veterans Administration health programs. Because of the broad and far-reaching nature of these laws, we may be required to alter or discontinue one or more of our business practices to be in compliance with these laws.
Healthcare fraud and abuse regulations are complex, and even minor irregularities can potentially give rise to claims that a statute or prohibition has been violated. Examples of laws that may affect our ability to operate include:
| |
• | the Federal Anti-Kickback Statute, which prohibits, among other things, persons from knowingly and willfully soliciting, receiving, offering or paying remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual for, or the purchase, order or recommendation of, any good or service for which payment may be made under federal healthcare programs such as the Medicare and Medicaid programs; |
| |
• | federal false claims laws which prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, claims for payment from Medicare, Medicaid, or other third-party payors that are false or fraudulent; |
| |
• | the federal Health Insurance Portability and Accountability Act of 1996, which created federal criminal laws that prohibit executing a scheme to defraud any healthcare benefit program or making false statements relating to healthcare matters; |
| |
• | the Federal Trade Commission Act and similar laws regulating advertisement and consumer protections; |
| |
• | the FCPA, which prohibits corrupt payments, gifts or transfers of value to foreign officials; |
| |
• | foreign and U.S. state law equivalents of each of the above federal laws, such as anti-kickback and false claims laws which may apply to items or services reimbursed by any third-party payor, including commercial insurers; and |
| |
• | the Physician Payment Sunshine Act, which requires medical device companies to report all compensation, gifts and benefits they have provided to certain healthcare professionals. |
Possible sanctions for violation of these laws include monetary fines, civil and criminal penalties, exclusion from Medicare and Medicaid programs and forfeiture of amounts collected in violation of such prohibitions. Any violations of these laws, or any action against us for violation of these laws, even if we
successfully defend against it, could result in a material adverse effect on our reputation, business, results of operations and financial condition.
We have entered into consulting, royalty and other agreements with surgeons, including some who make referrals to us. In addition, some of our referring surgeons own our stock, which they either purchased in an arm’s length transaction on terms identical to those offered to non-referral sources or received from us as fair market value consideration for consulting services performed. While these transactions were structured with the intention of complying with all applicable laws, including the federal ban on physician self-referrals, commonly known as the “Stark Law,” state anti-referral laws and other applicable anti-kickback laws, it is possible that regulatory agencies may view these transactions as prohibited arrangements that must be restructured, or discontinued, or for which we could be subject to other significant penalties. Regulators also could prohibit us from accepting payment for referrals from these surgeons. We would be materially and adversely affected if regulatory agencies interpret our financial relationships with spine surgeons who order our products to be in violation of applicable laws and we were unable to comply with applicable laws. This could subject us to monetary penalties for non-compliance, the cost of which could be substantial, or we may be unable to accept referrals from such surgeons.
To enforce compliance with the federal laws, the DOJ has increased its scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Dealing with investigations can be time- and resource-consuming and can divert management’s attention from the business. Additionally, if an investigation were initiated involving us and we decided to settle that investigation with the DOJ or other law enforcement agencies, we may be forced to agree to additional onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business, financial condition and results of operations.
In addition, there has been a recent trend of increased federal and state regulation of payments made to physicians for marketing. Some states, such as California, Massachusetts and Vermont, mandate implementation of commercial compliance programs, along with the tracking and reporting of gifts, compensation and other remuneration to physicians. The shifting commercial compliance environment and the need to build and maintain robust and expandable systems to comply with different compliance and/or reporting requirements in multiple jurisdictions increase the possibility that a healthcare company may run afoul of one or more of the requirements.
The scope and enforcement of these laws is uncertain and subject to rapid change in the current environment of healthcare reform, especially in light of the lack of applicable precedent and regulations. Federal or state regulatory authorities might challenge our current or future activities under these laws. Any such challenge could have a material adverse effect on our reputation, business, results of operations and financial condition. In addition to the penalties described above, any state or federal regulatory review of us, regardless of the outcome, would be costly and time-consuming and could have a material adverse effect on our business, financial condition and results of operations.
Risks Related to our Financial Results and Need for Financing
We will need to generate significant sales to remain profitable.
We intend to increase our operating expenses substantially as we add sales representatives and distributors to increase our geographic sales coverage, submit additional IDE applications to the FDA, increase our marketing capabilities, conduct clinical trials and increase our general and administrative functions to support our growing operations. We will need to generate significant sales to maintain
profitability and we might not be able to do so. Even if we do generate significant sales, we might not be able to sustain or increase profitability on a quarterly or annual basis in the future. If our sales grow more slowly than we anticipate or if our operating expenses exceed our expectations, our business, financial condition and results of operations will likely be adversely affected.
We may be unable to grow our revenue or earnings as anticipated, which may have a material adverse effect on our results of operations.
We have experienced rapid growth since our inception and have increased our revenues to $474.4 million in 2014. Our ability to achieve future growth will depend upon, among other things, the success of our growth strategies, which we cannot assure will be successful. In addition, we may have more difficulty maintaining our historical or prior rate of growth of revenues, profitability or cash flows. Our future success will depend upon numerous factors, including the strength of our brand, the market success of our current and future products, competitive conditions, our ability to attract and retain our employees and our ability to manage our business and implement our growth strategy. If we are unable to achieve future growth, our business, financial condition and results of operations could be adversely affected. In addition, we anticipate significantly expanding our infrastructure and adding personnel in connection with our anticipated growth, which we expect will cause our selling, general and administrative expenses to increase, which could adversely impact our results of operations.
Our quarterly and annual operating results may fluctuate significantly.
Our operating results are difficult to predict and may be subject to periodic fluctuations. Our sales and results of operations will be affected by numerous factors, including:
| |
• | our ability to drive increased sales of our products; |
| |
• | our ability to establish and maintain an effective and dedicated sales force; |
| |
• | pricing pressure applicable to our products, including adverse third-party coverage and reimbursement outcomes; |
| |
• | results of clinical research and trials on our existing products and products in development; |
| |
• | the mix of our products sold because profit margins differ amongst our products; |
| |
• | timing of new product offerings, acquisitions, licenses or other significant events by us or our competitors; |
| |
• | the ability of our suppliers to timely provide us with an adequate supply of materials and components; |
| |
• | the evolving product offerings of our competitors; |
| |
• | regulatory approvals and legislative changes affecting the products we may offer or those of our competitors; |
| |
• | interruption in the manufacturing or distribution of our products; |
| |
• | the effect of competing technological, industry and market developments; |
| |
• | changes in our ability to obtain regulatory clearance or approval for our products; and |
| |
• | our ability to expand the geographic reach of our sales and marketing efforts. |
Many of the products we may seek to develop and introduce in the future will require FDA approval or clearance before commercialization in the United States, and commercialization of such products outside of the United States would likely require additional regulatory approvals and import licenses. As a result, it will be difficult for us to forecast demand for these products with any degree of certainty. In addition, we will be increasing our operating expenses as we expand our commercial capabilities. Accordingly, we may experience significant, unanticipated quarterly or annual losses. If our quarterly or annual operating results fall below the expectations of investors or securities analysts, the price of our Class A common stock could
decline substantially. Furthermore, any quarterly or annual fluctuations in our operating results may, in turn, cause the price of our Class A common stock to fluctuate substantially. We believe that quarterly comparisons of our financial results are not necessarily meaningful and should not be relied upon as an indication of our future performance.
The availability of funding under existing credit arrangements might be limited, and our cash and cash equivalents are subject to volatility.
Any lender that is obligated to provide funding to us under any now existing or future credit agreement with us may not be able to provide funding in a timely manner, or at all, when we require it. The cost of, or lack of, available credit or equity financing could impact our ability to develop sufficient liquidity to maintain or grow our company, which in turn may adversely affect our business, results of operations or financial condition. We also manage cash and cash equivalents and short-term investments through various institutions. There may be a risk of loss on investments based on the volatility of the underlying instruments that will prevent us from recovering the full principal of our investments. Negative changes in domestic and global economic conditions or disruptions of either or both of the financial and credit markets may also affect third-party payors and may have a material adverse effect on our stock price, business, results of operations, financial condition and liquidity.
Our future capital needs are uncertain and we may need to raise funds in the future, and such funds may not be available on acceptable terms or at all.
Continued expansion of our business will be expensive and we may seek funds from public and private stock offerings, borrowings under our existing or future credit facilities or other sources. Our capital requirements will depend on many factors, including:
| |
• | the revenues generated by sales of our products; |
| |
• | the costs associated with expanding our sales and marketing efforts; |
| |
• | the expenses we incur in manufacturing and selling our products; |
| |
• | the costs of developing and commercializing new products or technologies; |
| |
• | the cost of obtaining and maintaining regulatory approval or clearance of our products and products in development; |
| |
• | the number and timing of acquisitions and other strategic transactions; |
| |
• | the costs associated with our planned international expansion; |
| |
• | the costs associated with increased capital expenditures, including fixed asset purchases of instrument sets which we loan to hospitals to support surgeries; and |
| |
• | unanticipated general and administrative expenses. |
As a result of these factors, we may seek to raise capital, and such capital may not be available on favorable terms, or at all. Furthermore, if we issue equity or debt securities to raise capital, our existing stockholders may experience dilution, and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. In addition, if we raise capital through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our products, potential products or proprietary technologies, or grant licenses on terms that are not favorable to us. If we cannot raise capital on acceptable terms, we may not be able to develop or enhance our products, execute our business plan, take advantage of future opportunities, or respond to competitive pressures, changes in our supplier relationships, or unanticipated customer requirements. Any of these events could adversely affect our ability to achieve our development and commercialization goals, which could have a material adverse effect on our business, results of operations and financial condition.
Our existing revolving credit facility contains restrictive covenants that may limit our operating flexibility.
Our existing revolving credit facility contains certain restrictive covenants that limit our ability to transfer or dispose of assets, merge with other companies or consummate certain changes of control, acquire other companies, pay dividends, incur additional indebtedness and liens, experience changes in management and enter into new businesses. We therefore may not be able to engage in any of the foregoing transactions unless we obtain the consent of the lender or terminate the revolving credit facility. There is no guarantee that we will be able to generate sufficient cash flow or sales to meet the financial covenants or pay the principal and interest on any such debt. Furthermore, there is no guarantee that future working capital, borrowings or equity financing will be available to repay or refinance any such debt.
Risks Related to our Intellectual Property and Potential Litigation
Our ability to protect our intellectual property and proprietary technology is uncertain.
We rely primarily on patent, copyright, trademark and trade secret laws, as well as confidentiality and non-disclosure agreements and other methods, to protect our proprietary technologies and know-how. We have applied for patent protection relating to certain existing and proposed products and processes. While we generally apply for patents in those countries where we intend to make, have made, use or sell patented products, we may not accurately predict all of the countries where patent protection will ultimately be desirable. If we fail to timely file a patent application in any such country, we may be precluded from doing so at a later date. Furthermore, we cannot assure you that any of our patent applications will be approved. The rights granted to us under our patents, including prospective rights sought in our pending patent applications, may not be meaningful or provide us with any commercial advantage and they could be opposed, contested or circumvented by our competitors or be declared invalid or unenforceable in judicial or administrative proceedings. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer the same or similar products or technologies. Competitors may be able to design around our patents or develop products that provide outcomes which are comparable to ours without infringing on our intellectual property rights. We have entered into confidentiality agreements and intellectual property assignment agreements with our officers, employees, consultants and advisors regarding our intellectual property and proprietary technology. In the event of unauthorized use or disclosure or other breaches of such agreements, we may not be provided with meaningful protection for our trade secrets or other proprietary information. Due to differences between foreign and U.S. patent laws, our patented intellectual property rights may not receive the same degree of protection in foreign countries as they would in the United States. Even if patents are granted outside the United States, effective enforcement in those countries may not be available. Since most of our issued patents and pending patent applications are for the United States only, we lack a corresponding scope of patent protection in other countries. In countries where we do not have significant patent protection, we may not be able to stop a competitor from marketing products in such countries that are the same as or similar to our products.
We rely on our trademarks, trade names and brand names to distinguish our products from the products of our competitors, and have registered or applied to register many of these trademarks. We cannot assure you that our trademark applications will be approved. Third parties may also oppose our trademark applications, or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition, and could require us to devote resources to advertising and marketing new brands. Further, we cannot assure you that competitors will not infringe upon our trademarks, or that we will have adequate resources to enforce our trademarks.
If a competitor infringes upon one of our patents, trademarks or other intellectual property rights, enforcing those patents, trademarks and other rights may be difficult and time consuming. Even if successful, litigation to defend our patents and trademarks against challenges or to enforce our intellectual property rights could be expensive and time consuming and could divert management’s attention from managing our business. Moreover, we may not have sufficient resources or desire to defend our patents or trademarks against challenges or to enforce our intellectual property rights.
The medical device industry is characterized by patent litigation and we could become subject to litigation that could be costly, result in the diversion of management’s time and efforts, require us to pay damages, and/or prevent us from marketing our existing or future products.
Our commercial success will depend in part on not infringing the patents or violating the other proprietary rights of third parties. Significant litigation regarding patent rights exists in our industry. Our competitors in both the United States and abroad, many of which have substantially greater resources and have made substantial investments in competing technologies, may have applied for or obtained or may in the future apply for and obtain, patents that will prevent, limit or otherwise interfere with our ability to make and sell our products. We have not conducted an independent review of patents issued to third parties. The large number of patents, the rapid rate of new patent issuances, the complexities of the technology involved and uncertainty of litigation increase the risk of business assets and management’s attention being diverted to patent litigation. We have received in the past, and expect to receive in the future, communications from various industry participants alleging our infringement of their patents, trade secrets or other intellectual property rights and/or offering licenses to such intellectual property. We are currently subject to lawsuits, and have received other written allegations, claiming that we have infringed certain patents of our competitors and others in the spine industry, including N-Spine (subsequently acquired by Depuy Synthes), Depuy Synthes, and Bonutti Skeletal Innovations LLC. A summary of the N-Spine, Depuy Synthes, and Bonutti Skeletal Innovations LLC cases is provided under “Item 3. Legal Proceedings” below. Any lawsuits resulting from such allegations could subject us to significant liability for damages, such as the jury verdict returned against us in June 2013 in the patent infringement case brought by DePuy Synthes, and invalidate our proprietary rights. Any potential intellectual property litigation also could force us to do one or more of the following:
| |
• | stop selling products or using technology that contains the allegedly infringing intellectual property; |
| |
• | lose the opportunity to license our technology to others or to collect royalty payments based upon successful protection and assertion of our intellectual property rights against others; |
| |
• | incur significant legal expenses; |
| |
• | pay substantial damages to the party whose intellectual property rights we may be found to be infringing; |
| |
• | redesign those products that contain the allegedly infringing intellectual property, which could be costly and disruptive; or |
| |
• | attempt to obtain a license to the relevant intellectual property from third parties, which may not be available on reasonable terms or at all. |
Any litigation or claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business, and harm our reputation. Further, as the number of participants in the spine industry grows, the possibility of intellectual property infringement claims against us increases. If we are found to infringe the intellectual property rights of third parties, we could be required to pay substantial damages (including treble, or triple, damages if an infringement is found to be willful) and/or royalties and could be prevented from selling our products unless we obtain a license or are able to redesign our products to avoid infringement.
Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe the intellectual property rights of others. If we fail to obtain any required licenses or make any necessary changes to our products or technologies, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products, all of which could have a material adverse effect on our business, results of operations and financial condition.
Further, in the course of our regular review of pending legal matters, we determine whether it is reasonably possible that a potential loss relating to a legal proceeding may have a material impact on our business, financial performance or cash position. However, estimates of possible losses are inherently uncertain, and even if we determine that a loss is reasonably possible, in accordance with authoritative accounting guidance, if we are unable to estimate the possible loss or range of loss, we do not record an accrual related to such litigation. As a result of this accounting policy, we may experience variability in our results of operations if damages for which we are found liable exceed the amounts we have accrued. For example, on June 14, 2013, the jury in the patent infringement case in the U.S. District Court in Delaware brought by DePuy Synthes returned a verdict in favor of DePuy Synthes and on January 17, 2014, the jury in a misappropriation of trade secret suit filed against us in the Federal District Court for the Eastern District of Texas by Sabatino Bianco returned a verdict in favor of Bianco. In prior periods, we were unable to determine the probable outcomes in these cases or estimate the potential loss. As a result of these verdicts, we have a combined $26.0 million accrued in damages and other related costs as of December 31, 2014, which reduced our 2014 and 2013 U.S. GAAP diluted earnings per share by approximately $0.04 and $0.17, respectively (see further discussion under “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations; Non-GAAP Financial Measures” below).
In addition, we generally indemnify our customers and distributors with respect to infringement by our products of the proprietary rights of third parties. Third parties may assert infringement claims against our customers or distributors. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers or distributors, regardless of the merits of these claims. If any of these claims succeed, we may be forced to pay damages on behalf of our customers or distributors or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products.
We may be subject to damages resulting from claims that we, our employees or our independent distributors have wrongfully used or disclosed alleged trade secrets, proprietary or confidential information of our competitors or are in breach of non-competition or non-solicitation agreements with our competitors.
Many of our employees were previously employed at other medical device companies, including our competitors or potential competitors, in some cases until recently. Many of our independent distributors sell, or in the past have sold, products of our competitors. We may be subject to claims that we, our employees, or our independent distributors have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of these former employers or competitors. In addition, we have been and may in the future be subject to claims that we caused an employee to breach the terms of his or her non-competition or non-solicitation agreement. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. If our defense to those claims fails, in addition to paying monetary damages, we may lose valuable personnel. There can be no assurance that this type of litigation will not continue, and any future litigation or the threat thereof may adversely affect our ability to hire additional direct sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize product candidates, which could have an adverse effect on our business, results of operations and financial condition.
We may incur product liability losses and insurance coverage may be inadequate or unavailable to cover these losses.
Our business exposes us to potential product liability claims that are inherent in the testing, design, manufacture and sale of medical devices for spine surgery procedures. The development of allograft implants and technologies for human tissue repair and treatment may entail particular risk of transmitting diseases to human recipients, which could result in the assertion of substantial product liability claims against us. Spine surgery involves significant risk of serious complications, including bleeding, nerve injury, paralysis and even death. In addition, if longer-term patient results and experience indicates that our products or any component of a product cause tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. Furthermore, if spine surgeons are not sufficiently trained in the use of our products, they may misuse or ineffectively use our products, which may result in unsatisfactory patient outcomes or patient injury. We could become the subject of product liability lawsuits alleging that component failures, manufacturing flaws, design defects or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients. The spine industry has been particularly prone to potential product liability claims that are inherent in the testing, manufacture and sale of medical devices and products for spine surgery procedures.
A product liability or other damages claim, product recall or product misuse, regardless of the outcome, could require us to spend significant time and money in litigation or to pay significant damages or costs, and could seriously harm our business. If our product liability insurance is inadequate to pay a damages award, we may have to pay the excess out of our cash reserves, which may harm our financial condition. Any product liability claim brought against us, with or without merit, could result in the increase of the costs we incur to obtain product liability insurance or our inability to secure product liability coverage in the future. If any of our products are found to cause tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. Even a meritless or unsuccessful product liability claim could harm our reputation in the industry, impair our ability to sell one or more of our products in the future, result in significant legal fees and cause significant diversion of management’s attention from managing our business. A product liability or other claim, product recall, or product misuse involving any of our products, whether or not meritorious, could also materially and adversely harm our reputation and our ability to attract and retain customers.
In addition, any product liability claim brought against us, with or without merit, could result in an increase of our product liability insurance rates. Insurance coverage varies in cost and can be difficult to obtain, and we cannot guarantee that we will be able to obtain insurance coverage in the future on terms acceptable to us or at all.
Risks Related to the Ownership of our Class A Common Stock
Because of their significant stock ownership, our chief executive officer, our other executive officers, and our directors and principal stockholders will be able to exert control over us and our significant corporate decisions.
Because of their significant stock ownership, our chief executive officer, our other executive officers, and our directors will be able to exert substantial control over us and our significant corporate decisions. Based on an aggregate of 94,705,743 shares of our Class A and Class B common stock outstanding as of December 31, 2014, our executive officers and directors and their affiliates beneficially owned, in the aggregate, approximately 78.5% of the voting power of our outstanding capital stock. In particular, as of December 31, 2014, David C. Paul, our CEO and his family members, controlled approximately 28.4% of
our Class A and Class B common stock, representing approximately 78.1% of the voting power of our outstanding capital stock as of that date.
As a result, David C. Paul has, and these persons acting together have, the ability to significantly influence or determine the outcome of all matters submitted to our stockholders for approval, including the election and removal of directors and any merger, consolidation, or sale of all or substantially all of our assets. Furthermore, as of December 31, 2014, we had 192,562,323 shares of Class B common stock available for issuance. This amount exceeds 5% of our outstanding common stock, meaning our Board of Directors (“Board”) could issue Class B common stock without necessarily triggering the automatic conversion of that Class B common stock to Class A common stock that, pursuant to our charter, will occur when any holder’s shares of Class B common stock represents less than 5% of the aggregate number of all outstanding shares of our common stock, thereby further concentrating the voting power of our capital stock in a limited number of stockholders.
The interests of our executive officers, directors and principal stockholders might not coincide with the interests of the other holders of our capital stock. This concentration of ownership may harm the value of our Class A common stock by, among other things:
| |
• | delaying, deferring or preventing a change in control of our company; |
| |
• | impeding a merger, consolidation, takeover or other business combination involving our company; or |
| |
• | causing us to enter into transactions or agreements that are not in the best interests of all stockholders. |
We are a “controlled company” within the meaning of the New York Stock Exchange Rules, and we take, and intend to continue to take, advantage of exemptions from certain corporate governance requirements.
David C. Paul, alone, and our management, directors and significant stockholders, collectively, beneficially own a majority of the voting power of our outstanding common stock. Under the New York Stock Exchange Rules, a company of which more than 50% of the voting power is held by an individual, group or another company is a “controlled company” and may elect not to comply with certain corporate governance requirements, including the requirement that a majority of our directors be independent, as defined in the New York Stock Exchange Rules, and the requirement that our compensation and nominating and corporate governance committees consist entirely of independent directors. We rely, and intend to continue to rely, on the “controlled company” exemption under the New York Stock Exchange Rules. As a result, a majority of the members of our Board may not be independent directors and our nominating and corporate governance and compensation committees will not consist entirely of independent directors. Accordingly, while we remain a controlled company and during any transition period following a time when we are no longer a controlled company, you will not have the same protections afforded to stockholders of companies that are subject to all of the New York Stock Exchange’s corporate governance requirements.
Our Board is authorized to issue and designate shares of our preferred stock in additional series without stockholder approval.
Our amended and restated certificate of incorporation authorizes our Board, without the approval of our stockholders, to issue 35 million shares of our preferred stock, subject to limitations prescribed by applicable law, rules and regulations and the provisions of our amended and restated certificate of incorporation, as shares of preferred stock in series, and to establish from time to time the number of shares to be included in each such series, and to fix the designation, powers, preferences and rights of the shares of each such series and the qualifications, limitations or restrictions thereof. The powers, preferences and rights
of these additional series of preferred stock may be senior to or on parity with our Class A common stock, which may reduce its value.
Anti-takeover provisions in our organizational documents and Delaware law may discourage or prevent a change of control, even if an acquisition would be beneficial to our stockholders, which could depress the price of our Class A common stock and prevent attempts by our stockholders to replace or remove our current management.
Our amended and restated certificate of incorporation and amended and restated bylaws contain other provisions that could delay or prevent a change of control of our company or changes in our Board that our stockholders might consider favorable.
In addition, we are subject to the provisions of Section 203 of the Delaware General Corporation Law regulating corporate takeovers, which may restrict or prohibit certain business combination transactions with stockholders owning 15% or more of our outstanding voting stock, including discouraging takeover attempts that might result in a premium over the market price for shares of our Class A common stock.
Section 203 and other provisions in our amended and restated certificate of incorporation, amended and restated bylaws and Delaware law could make it more difficult for stockholders or potential acquirers to obtain control of our Board or initiate actions that are opposed by our then-current Board, including delay or impede a merger, tender offer, or proxy contest involving our company. The existence of these provisions could negatively affect the price of our Class A common stock and limit opportunities for you to realize value in a corporate transaction.
We do not intend to pay cash dividends.
We have never declared or paid cash dividends on our capital stock. We currently intend to retain all available funds and any future earnings for use in the operation and expansion of our business and do not anticipate paying any cash dividends in the foreseeable future. In addition, we have a revolving credit facility that, if we borrow under it, may preclude us from paying any dividends. Accordingly, you may have to sell some or all of your shares of our Class A common stock in order to generate cash flow from your investment. You may not receive a gain on your investment when you sell shares and you may lose the entire amount of the investment.
The price of our Class A common stock might fluctuate significantly, and you could lose all or part of your investment.
The trading price of our Class A common stock may be volatile and subject to wide price fluctuations in response to various factors, including:
| |
• | actual or anticipated fluctuations in our quarterly financial and operating results; |
| |
• | the overall performance of the equity markets; |
| |
• | introduction of new services or announcements of significant contracts, acquisitions or capital commitments by us or our competitors; |
| |
• | legislative, political or regulatory developments; |
| |
• | issuance of new or changed securities analysts’ reports or recommendations; |
| |
• | additions or departures of key personnel; |
| |
• | threatened or actual litigation and government investigations; |
| |
• | investor perceptions of us and the medical device industry, changes in accounting standards, policies, guidance, interpretations or principles; |
| |
• | sale of shares of our Class A common stock by us or members of our management; |
| |
• | general economic conditions; |
| |
• | changes in interest rates; and |
| |
• | availability of capital. |
These and other factors might cause the market price of our Class A common stock to fluctuate substantially, which might limit or prevent investors from readily selling their shares of our Class A common stock and may otherwise negatively affect the liquidity of our Class A common stock. In addition, in recent years, the stock market has experienced significant price and volume fluctuations. This volatility has had a significant impact on the market price of securities issued by many companies across many industries. The changes frequently appear to occur without regard to the operating performance of the affected companies. Accordingly, the price of our Class A common stock could fluctuate based upon factors that have little or nothing to do with our company, and these fluctuations could materially reduce our share price. Securities class action litigation has often been instituted against companies following periods of volatility in the overall market and in the market price of a company’s securities. This litigation, if instituted against us, could result in substantial costs, divert our management’s attention and resources, and harm our business, operating results and financial condition.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
As of December 31, 2014, our owned corporate headquarters in Audubon, Pennsylvania, comprised approximately 245,000 square feet. Our headquarters houses our research, product development, education, administration, warehouse and shipping functions, as well as our in-house manufacturing facility. In October
2014, we acquired a 13,000 square foot distribution center in Heerlen, Netherlands to support our international operations. Additionally, pursuant to our October 23, 2014 acquisition of Transplant Technologies of Texas, Ltd., we now lease approximately 20,000 square feet in San Antonio, Texas.
Item 3. Legal Proceedings
We are involved in a number of proceedings, legal actions and claims. Such matters are subject to many uncertainties, and the outcomes of these matters are not within our control and may not be known for prolonged periods of time. In some actions, the claimants seek damages, as well as other relief, including injunctions prohibiting us from engaging in certain activities, which, if granted, could require significant expenditures and/or result in lost revenues. The material legal proceedings to which we are currently a party are described below.
N-Spine, Synthes and Depuy Synthes Litigation
In April 2010, N-Spine, Inc. and Synthes USA Sales, LLC filed suit against us in the U.S. District Court for the District of Delaware for patent infringement. N-Spine, the patent owner, and Synthes USA, a licensee of the subject patent, allege that we infringe one or more claims of the patent by making, using, offering for sale or selling our TRANSITION® stabilization system product. N-Spine and Synthes USA seek injunctive relief and an unspecified amount in damages. We intend to defend our rights vigorously. This matter was stayed on July 14, 2011 pending the resolution of an inter partes reexamination on the asserted patent granted by the U.S. Patent and Trademark Office (“USPTO”) in February 2011. In December 2011, the examiner withdrew the original grounds of rejection of the asserted patent and we appealed the examiner’s decision. In January 2014, the USPTO ruled on the appeal, rejecting certain claims in view of the prior art and affirming certain other claims. The probable outcome of this litigation cannot be determined, nor can we estimate a range of potential loss. Therefore, in accordance with authoritative guidance on the evaluation of loss contingencies, we have not recorded an accrual related to this litigation.
In a related matter, on January 8, 2014, Depuy Synthes Products, LLC (“Depuy Synthes”) filed suit against us in the U.S. District Court for the District of Delaware for patent infringement. Depuy Synthes alleges that we infringe one or more claims of the asserted patent by making, using, offering for sale or selling our TRANSITION® stabilization system product. Depuy Synthes seeks injunctive relief and an unspecified amount in damages. We intend to defend our rights vigorously. The probable outcome of this litigation cannot be determined, nor can we estimate a range of potential loss. Therefore, in accordance with authoritative guidance on the evaluation of loss contingencies, we have not recorded an accrual related to this litigation.
Synthes USA, LLC, Synthes USA Products, LLC and Synthes USA Sales, LLC Litigation
In July 2011, Synthes USA, LLC, Synthes USA Products, LLC and Synthes USA Sales, LLC filed suit against us in the U.S. District Court for the District of Delaware for patent infringement. Synthes USA LLC, the patent owner, Synthes USA Products, LLC, a licensee to manufacture products of the subject patents, and Synthes USA Sales LLC, a licensee to sell products of the subject patents, allege that we infringe one or more claims of three patents by making, using, offering for sale or selling our COALITION®, INDEPENDENCE® and INTERCONTINENTAL® products. As a result of the acquisition of Synthes, Inc. by Johnson & Johnson, a motion was filed to change the plaintiff in this matter to DePuy Synthes in February 2013. On June 14, 2013, the jury in this case returned a verdict, finding that prior versions of the three products we previously sold did infringe on DePuy Synthes’ patents and awarding monetary damages in the amount of $16.0 million. The jury also upheld the validity of DePuy Synthes’ patents. There was no finding of willful infringement by Globus.
We do not expect the verdict to impact our ability to conduct our business or to have any material impact on our future revenues. As this lawsuit involved only three products that are no longer part of our product portfolio, this verdict is not expected to impair our ability to sell any of our future products.
We believe the facts and the law do not support the jury’s findings of infringement and patent validity and are seeking to overturn the verdict through the appeals process.
For the year ended December 31, 2013, we accrued $19.5 million in damages and other litigation-related costs related to this case, of which $1.3 million was included in provision for litigation loss (cost of goods sold, due to a write off of certain inventory which will not be sold due to the verdict) and $18.2 million was included in provision for litigation loss (operating expense). During the year ended December 31, 2014, we accrued an additional $0.6 million in interest included in provision for litigation related to this litigation.
L5 Litigation
In December 2009, we filed suit in the Court of Common Pleas of Montgomery County, Pennsylvania against our former exclusive independent distributor L5 Surgical, LLC and its principals, seeking an injunction and declaratory judgment concerning certain restrictive covenants made to L5 by its sales representatives. L5 brought counterclaims against us alleging tortious interference, unfair competition and conspiracy. The injunction phase was resolved in September 2010, and this matter is now in the discovery phase of litigation on the underlying damages claims. We intend to defend our rights vigorously. The probable outcome of this litigation cannot be determined, nor can we estimate a range of potential loss. Therefore, in accordance with authoritative guidance on the evaluation of loss contingencies, we have not recorded an accrual related to this litigation.
NuVasive Litigation
In October 2010, NuVasive, Inc. filed suit against us in the U.S. District Court for the District of Delaware for patent infringement. NuVasive, the patent owner, alleges that we infringe one or more claims of three patents by making, using, offering for sale or selling our MARS™ 3V retractor for use in certain lateral fusion procedures. NuVasive sought injunctive relief and an unspecified amount in damages. This matter was settled on February 12, 2015 for an undisclosed amount.
NuVasive Employee Litigation
We have hired several employees who were formerly employed by NuVasive, Inc. In July 2011, NuVasive filed suit against us in the District Court of Travis County, Texas alleging that our hiring of one named former employee and other unnamed former employees constitutes tortious interference with its contracts with those employees, and with prospective business relationships, as well as aiding and abetting the breach of fiduciary duty. NuVasive sought compensatory damages, permanent injunction, punitive damages and attorneys’ fees. This matter was settled on February 12, 2015 for an undisclosed amount.
Bianco Litigation
On March 21, 2012, Sabatino Bianco filed suit against us in the Federal District Court for the Eastern District of Texas claiming that we misappropriated his trade secret and confidential information and improperly utilized it in developing our CALIBER® product. Bianco alleges that we engaged in misappropriation of trade secrets, breach of contract, unfair competition, fraud and theft and seeks correction of inventorship, injunctive relief and exemplary damages. On April 20, 2012, Bianco filed a motion for a preliminary injunction, seeking to enjoin us from making, using, selling, importing or offering for sale our CALIBER® product. On November 15, 2012, the court denied Bianco’s motion for preliminary injunction.
On October 1, 2013, Bianco amended his complaint to include that his trade secrets and confidential information were also used improperly in developing our RISE® and CALIBER®-L products.
On January 17, 2014, the jury in this case returned a verdict in favor of Bianco on a claim of misappropriation of trade secret. We accrued the verdict amount of $4.3 million as of December 31, 2013. The jury found against Bianco on the claims of breach of contract and disgorgement of profits. The court granted our motion for judgment as a matter of law and dismissed Bianco’s claims for unfair competition, fraud, and exemplary damages, and Bianco abandoned the claim of misappropriation of confidential information. Bianco’s claims of correction of inventorship, unjust enrichment, and permanent injunctive relief were not submitted to the jury. On March 7, 2014, the court denied Bianco’s claim for correction of inventorship and ruled he is not entitled to be named as a co-inventor on any of the patents at issue, and also denied his claim for unjust enrichment. On March 17, 2014, the court denied Bianco’s claim for permanent injunctive relief. On July 2, 2014, the court awarded Bianco an ongoing royalty of 5% of the net sales of the CALIBER®, CALIBER®-L, and RISE® products, or products that are not colorably different from those products, for a fifteen year period on sales starting on January 18, 2014. The court entered final judgment on the jury verdict on July 17, 2014. Post-trial motions were denied on October 27, 2014 and the matter is currently on appeal.
We do not expect the verdict to impact our ability to conduct our business or to have any material impact on our future revenues. We believe the facts and the law do not support the jury’s findings of misappropriation of trade secret and are seeking to overturn the verdict through the appeals process.
Altus Partners, LLC Litigation
On February 20, 2013, Altus Partners, LLC filed suit against us in the U.S. District Court for the Eastern District of Pennsylvania for patent infringement. On April 7, 2014, we settled the litigation with Altus Partners and recognized a provision for litigation of $2.0 million.
Bonutti Skeletal Innovations, LLC Litigation
On November 19, 2014, Bonutti Skeletal Innovations, LLC filed suit against us in the U.S. District Court for the Eastern District of Pennsylvania for patent infringement. Bonutti Skeletal, a non-practicing entity, alleges that Globus willfully infringes one or more claims of six patents by making, using, offering for sale or selling the CALIBER®, CALIBER®-L, COALITION®, CONTINENTAL®, FORGE®, FORTIFY®, INDEPENDENCE®, INTERCONTINENTAL®, MONUMENT®, NIKO®, RISE®, SIGNATURE®, SUSTAIN®, and TRANSCONTINENTAL® products. Bonutti Skeletal seeks an unspecified amount in damages and injunctive relief. The probable outcome of this litigation cannot be determined, nor can we estimate a range of potential loss. Therefore, in accordance with authoritative guidance on the evaluation of loss contingencies, we have not recorded an accrual related to this litigation.
In addition, we are subject to legal proceedings arising in the ordinary course of business.
Item 4. Mine Safety Disclosures
Not applicable.
PART II
Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Class A Common Stock Market Price
Our Class A common stock trades on The New York Stock Exchange, under the symbol “GMED.” Prior to that time, there was no public trading market for our Class A common stock. The following table sets forth the high and low sales prices per share for our Class A common stock for the periods indicated, as reported by New York Stock Exchange:
|
| | | | | | | | |
Year Ended December 31, 2014: | | High | | Low |
1st Quarter | | $ | 27.14 |
| | $ | 19.52 |
|
2nd Quarter | | 27.00 |
| | 22.33 |
|
3rd Quarter | | 24.41 |
| | 17.45 |
|
4th Quarter | | 24.65 |
| | 19.00 |
|
| | | | |
Year Ended December 31, 2013: | | High | | Low |
1st Quarter | | $ | 15.15 |
| | $ | 10.55 |
|
2nd Quarter | | 17.37 |
| | 13.79 |
|
3rd Quarter | | 18.20 |
| | 16.22 |
|
4th Quarter | | 20.25 |
| | 16.93 |
|
We had approximately 83 stockholders of record as of 1/31/15. We believe that the number of beneficial owners is substantially greater than the number of record holders because a large portion of our Class A common stock is held of record through brokerage firms in “street name.”
Recent Sales of Unregistered Securities
None.
Issuer Purchases of Equity Securities
None.
Use of Proceeds
On August 2, 2012, our registration statement on Form S-1 (File No. 333-180426) was declared effective for our IPO, pursuant to which we registered the sale of 9,583,333 shares of Class A common stock at $12.00 per share, of which 2,083,333 shares were sold by us and 6,250,000 shares were sold by selling stockholders, plus 1,250,000 additional shares to cover the underwriters’ overallotment option, all of which were sold by selling stockholders. On August 8, 2012, we closed the IPO and the exercise of the underwriters’ overallotment. These sales were at the IPO price of $12.00 per share, for an aggregate gross offering price of $25.0 million for the shares sold by our company, and $90.0 million for the shares sold by selling stockholders. We did not receive any proceeds from the sale of securities by selling stockholders.
From the IPO effective date through December 31, 2013, we used $16.8 million for an acquisition that occurred in December 2013. The remainder of the net proceeds were invested in marketable securities.
The remaining proceeds from our initial public offering were used for the October 23, 2014, acquisition of Transplant Technologies of Texas, Ltd. for $36.1 million in cash. No further proceeds from the initial public offering remain.
Dividend Policy
We have never declared or paid any cash dividends on our capital stock. We currently intend to retain future earnings, if any, for development of our business and do not anticipate that we will declare or pay cash dividends on our capital stock in the foreseeable future.
Comparative Stock Performance Graph
The following graph illustrates a comparison of the total cumulative stockholder return on our Class A common stock from August 3, 2012 (which is the date our Class A common stock first began trading on The New York Stock Exchange) through December 31, 2014 to two indices: the S&P 500 Index and the S&P 500 Health Care Equipment Index. The graph assumes an initial investment of $100 on August 3, 2012, in each of our Class A common stock, the stocks comprising the S&P 500 Index, and the stocks comprising the S&P 500 Health Care Equipment Index, including reinvestment of dividends, if any. Historical stockholder return is not necessarily indicative of the performance to be expected for any future periods.
The following graph and related information shall not be deemed “soliciting material” or to be “filed” with the SEC, nor shall such information be incorporated by reference into any future filing, except to the extent that we specifically incorporate it by reference into such filing.
|
| | | | | | | | | | | | | | | | | | | | | | | | |
Company/Index | | August 3, 2012 | | December 31, 2012 | | June 30, 2013 | | December 31, 2013 | | June 30, 2014 | | December 31, 2014 |
Globus Medical, Inc. | | $ | 100 |
| | $ | 78 |
| | $ | 125 |
| | $ | 149 |
| | $ | 177 |
| | $ | 176 |
|
S&P 500 Index | | $ | 100 |
| | $ | 104 |
| | $ | 118 |
| | $ | 137 |
| | $ | 147 |
| | $ | 156 |
|
S&P 500 Health Care Equipment | | $ | 100 |
| | $ | 106 |
| | $ | 121 |
| | $ | 135 |
| | $ | 151 |
| | $ | 170 |
|
Item 6. Selected Financial Data
The selected consolidated financial data set forth in the table below has been derived from our audited financial statements. The data set forth below should be read in conjunction with “Item 7. Management’s
Discussion and Analysis of Financial Condition and Results of Operations” and “Item 8. Financial Statements and Supplementary Data” below.
|
| | | | | | | | | | | | | | | | | | | |
Statement of Operations Data: | Year Ended December 31, |
(In thousands, except per share amounts) | 2014 | | 2013 | | 2012 | | 2011 | | 2010 |
Sales | $ | 474,371 |
| | $ | 434,459 |
| | $ | 385,994 |
| | $ | 331,478 |
| | $ | 288,195 |
|
Cost of goods sold | 110,857 |
| | 100,343 |
| | 75,199 |
| | 68,796 |
| | 53,825 |
|
Gross profit | 363,514 |
| | 334,116 |
| | 310,795 |
| | 262,682 |
| | 234,370 |
|
Operating expenses: | | | | | | | | | |
Research and development | 31,687 |
| | 26,870 |
| | 27,926 |
| | 23,464 |
| | 21,309 |
|
Selling, general and administrative | 187,798 |
| | 182,518 |
| | 168,862 |
| | 140,386 |
| | 122,589 |
|
Provision for litigation loss/(income) | 5,667 |
| | 23,055 |
| | (786 | ) | | 1,470 |
| | 2,787 |
|
Total operating expenses | 225,152 |
| | 232,443 |
| | 196,002 |
| | 165,320 |
| | 146,685 |
|
Operating income | 138,362 |
| | 101,673 |
| | 114,793 |
| | 97,362 |
| | 87,685 |
|
Other income/(expense), net | 280 |
| | 328 |
| | (140 | ) | | (413 | ) | | 54 |
|
Income before income taxes | 138,642 |
| | 102,001 |
| | 114,653 |
| | 96,949 |
| | 87,739 |
|
Income tax provision | 46,157 |
| | 33,389 |
| | 40,822 |
| | 36,165 |
| | 33,281 |
|
Net income | $ | 92,485 |
| | $ | 68,612 |
| | $ | 73,831 |
| | $ | 60,784 |
| | $ | 54,458 |
|
Net income per common share: | | | | | | | | | |
Basic | $ | 0.98 |
| | $ | 0.74 |
| | $ | 0.82 |
| | $ | 0.69 |
| | $ | 0.61 |
|
Diluted | $ | 0.97 |
| | $ | 0.73 |
| | $ | 0.80 |
| | $ | 0.67 |
| | $ | 0.60 |
|
Weighted average number of common shares: | | | | | | | | | |
Basic | 94,227 |
| | 92,647 |
| | 89,608 |
| | 88,112 |
| | 88,925 |
|
Diluted | 95,457 |
| | 94,192 |
| | 92,208 |
| | 90,420 |
| | 91,352 |
|
|
| | | | | | | | | | | | | | | | | | | |
Balance Sheet Data: | As of December 31, |
(In thousands) | 2014 | | 2013 | | 2012 | | 2011 | | 2010 |
Cash, cash equivalents and marketable securities | $ | 304,051 |
| | $ | 275,452 |
| | $ | 212,400 |
| | $ | 142,668 |
| | $ | 111,701 |
|
Working capital | 380,613 |
| | 348,866 |
| | 320,602 |
| | 229,504 |
| | 187,245 |
|
Total assets | 703,547 |
| | 566,304 |
| | 447,133 |
| | 329,390 |
| | 266,575 |
|
Business acquisition liabilities, including current portion (1) | 26,276 |
| | 17,258 |
| | 11,344 |
| | 10,289 |
| | — |
|
Stockholders’ equity | $ | 585,454 |
| | $ | 472,360 |
| | $ | 386,502 |
| | $ | 282,476 |
| | $ | 228,195 |
|
| |
(1) | In connection with acquisitions completed in 2014 through 2011, we have certain contingent consideration obligations payable to the sellers in these transactions upon the achievement of certain regulatory and sales milestones. The maximum aggregate undiscounted amounts potentially payable were $38.9 million, $23.9 million, $9.9 million and $7.2 million as of December 31, 2014, 2013, 2012 and 2011, respectively. |
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis of our financial condition and results of operations should be read together with our consolidated financial statements and related notes included elsewhere in this Annual Report. This discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. You should review the “Risk Factors” and “Cautionary Note Concerning Forward-Looking Statements” sections of this Annual Report for a discussion of certain of the important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements described in the following discussion and analysis. Certain amounts and percentages in this discussion and analysis have been rounded for convenience of presentation.
Overview
We are a medical device company focused exclusively on the design, development and commercialization of musculoskeletal implants. We are currently focused on implants that promote healing in patients with spine disorders. We are an engineering-driven company with a history of rapidly developing and commercializing advanced products and procedures that assist surgeons in effectively treating their patients, respond to evolving surgeon needs and address new treatment options. Since our inception in 2003, we have launched over 130 products and offer a comprehensive product portfolio of innovative and differentiated products addressing a broad array of spinal pathologies, anatomies and surgical approaches.
We sell implants and related disposables to our customers, primarily hospitals, for use by surgeons to treat spine disorders. All of our products fall into one of two categories: Innovative Fusion or Disruptive Technologies. Spinal fusion is a surgical procedure to correct problems with the individual vertebrae, the interlocking bones making up the spine, by preventing movement of the affected bones. Our Innovative Fusion products are used in cervical, thoracolumbar, sacral, and interbody/corpectomy fusion procedures to treat degenerative, deformity, tumor, and trauma conditions.
We define Disruptive Technologies as those that represent a significant shift in the treatment of spine disorders by allowing for novel surgical procedures, improvements to existing surgical procedures, the treatment of spine disorders by new physician specialties, and surgical intervention earlier in the continuum of care. Our current portfolio of approved and pipeline products includes a variety of Disruptive Technology products, which we believe offer material improvements to fusion procedures, such as minimally invasive surgical techniques, as well as new treatment alternatives including motion preservation technologies, such as dynamic stabilization, total disc replacement and interspinous process spacer products, and advanced biomaterials technologies, as well as interventional pain management solutions, including treatments for vertebral compression fractures.
To date, the primary market for our products has been the United States, where we sell our products through a combination of direct sales representatives employed by us and distributor sales representatives employed by our exclusive independent distributors, who distribute our products on our behalf for a commission that is generally based on a percentage of sales. We believe there is significant opportunity to strengthen our position in the U.S. market by increasing the size of our U.S. sales force and we intend to add additional direct and distributor sales representatives by the end of 2015.
During the year ended December 31, 2014, our international sales accounted for approximately 10% of our total sales. We sell our products through a combination of direct sales representatives employed by us and international distributors. We believe there are significant opportunities for us to increase our presence in both existing and new international markets through the expansion of our direct and distributor sales forces and the commercialization of additional products.
Recent Developments
In October 2014, we completed the acquisition of Transplant Technologies of Texas, Ltd. (“TTOT”), an allograft tissue processor based in San Antonio, Texas. TTOT is a provider of human tissue products such as bone allografts, biomaterials and soft tissue products for spine, orthopedics, sports medicine, dental and wound care markets. This acquisition represents a key step in fulfilling our strategy of building a broad business in regenerative biologics. While we currently partner with third party suppliers for our existing allograft products, the acquisition of TTOT will expand our suite of regenerative biologics products. We believe this acquisition will also greatly improve our capabilities for the development of new and innovative human allograft tissue products in the future.
On February 25, 2015, we entered into an agreement to acquire medical device manufacturer Branch Medical Group, Inc. (“BMG”). Under the terms of the agreement we have agreed to pay approximately $52.9 million in cash subject to certain closing adjustments for BMG on a cash-free, debt-free basis. We expect the closing of the acquisition to occur in March 2015 following satisfaction of the applicable closing conditions.
Components of our Results of Operations
We manage our business globally within one reportable segment, which is consistent with how our management reviews our business, makes investment and resource allocation decisions and assesses operating performance.
Sales
We sell implants and related disposables, primarily to hospitals, for use by spine surgeons to treat spine disorders. We generally consign our surgical sets, which contain our implants, disposables, surgical instruments and cases to our sales representatives, and the sets are maintained with the sales representatives or at our hospital customers that purchase the implants and related disposables used in the surgeries. We recognize revenue when we are notified that consigned implants and related disposables have been implanted or used, or for sets that are sold directly and not consigned, when title to the goods and risk of loss are transferred to customers with no remaining performance obligations which affect the customer’s final acceptance of the sale. We expect to expand our U.S. and international sales forces, which will provide us with significant opportunity to continue to increase our penetration in existing markets and to enter new international markets. We also expect to increase sales by commercializing new products, but expect the increase of sales from new products to be partially offset by decreased sales of earlier-generation products.
We classify our products into two categories: Innovative Fusion and Disruptive Technologies. Disruptive Technologies are those that represent a significant shift in the treatment of spine disorders, by allowing for novel surgical procedures, improvements to existing surgical procedures, the treatment of spine disorders by new physician specialties, and surgical intervention earlier in the continuum of care. As a result, we anticipate Disruptive Technology products to continue to drive our sales growth in the future.
Cost of Goods Sold
Our products are generally manufactured by third-party suppliers. Substantially all of our suppliers manufacture our products in the United States. Our cost of goods sold consists primarily of costs of products purchased from our third-party suppliers, excess and obsolete inventory charges, depreciation of surgical instruments and cases, royalties, shipping, inspection and related costs incurred in making our products
available for sale or use. Beginning in January 2013, our cost of goods sold increased as a result of a medical device excise tax (“MDET”) of up to 2.3% on the sale of certain medical devices in the United States.
Research and Development Expenses
Our research and development expenses primarily consist of engineering, product development, clinical and regulatory expenses, consulting services, outside prototyping services, internal and external research activities, materials, depreciation, and other costs associated with development of our products. Research and development expenses also include related personnel and consultants’ compensation and stock-based compensation expense. We expense research and development costs as they are incurred.
We expect to incur additional research and development costs as we continue to develop new products. These costs will increase in absolute terms as we continue to expand our product pipeline and add personnel.
Selling, General and Administrative Expenses
Selling, general and administrative expenses primarily consist of salaries, benefits and other related costs, including stock-based compensation for personnel employed in sales, marketing, finance, legal, compliance, administrative, information technology, medical education and training, quality and human resource departments. Our selling, general and administrative expenses also include commissions, generally based on a percentage of sales, to direct sales representatives and distributors. We expect our selling, general and administrative expenses will increase in absolute terms with the continued expansion of our sales force and commercialization of our current and pipeline products. We plan to hire more personnel to support the growth of our business.
Provision for Litigation Loss/(Income)
We record a provision for litigation settlements when a loss is known or considered probable and the amount can be reasonably estimated.
Income Tax Provision
We are taxed at the rates applicable within each jurisdiction. The composite income tax rate, tax provisions, deferred tax assets and deferred tax liabilities will vary according to the jurisdiction in which profits arise. Tax laws are complex and subject to different interpretations by management and the respective governmental taxing authorities, and require us to exercise judgment in determining our income tax provision, our deferred tax assets and liabilities, and the valuation allowance recorded against our net deferred tax assets.
Deferred tax assets and liabilities are determined using the enacted tax rates in effect for the years in which those tax assets are expected to be realized. A valuation allowance is established when it is more likely than not that the future realization of all or some of the deferred tax assets will not be achieved.
Critical Accounting Policies and Estimates
The preparation of the consolidated financial statements requires us to make assumptions, estimates and judgments that affect the reported amounts of assets and liabilities, the disclosures of contingent assets and liabilities as of the date of the consolidated financial statements, and the reported amounts of sales and expenses during the reporting periods. Certain of our more critical accounting policies require the application of significant judgment by management in selecting the appropriate assumptions for calculating financial estimates. By their nature, these judgments are subject to an inherent degree of uncertainty. On an ongoing basis, we evaluate our judgments, including but not limited to those related to inventories, recoverability of long-lived assets and the fair value of our common stock. We use historical experience and other assumptions as the basis for our judgments and making these estimates. Because future events and their effects cannot be determined with precision, actual results could differ significantly from these estimates. Any changes in
those estimates will be reflected in our consolidated financial statements as they occur. While our significant accounting policies are more fully described in “Item 8. Financial Statements and Supplementary Data; Notes to Consolidated Financial Statements; Note 1. Background and Summary of Significant Accounting Policies” below in this Annual Report, we believe that the following accounting policies and estimates are most critical to a full understanding and evaluation of our reported financial results. The critical accounting policies addressed below reflect our most significant judgments and estimates used in the preparation of our consolidated financial statements. We have reviewed these critical accounting policies with the audit committee of our Board.
Revenue Recognition. We recognize revenue when persuasive evidence of an arrangement exists, product delivery has occurred, pricing is fixed or determinable, and collection is reasonably assured. We generate a significant portion of our revenue from consigned inventory maintained at hospitals or with sales representatives. For these products, we recognize revenue at the time we are notified the product has been used or implanted. For all other transactions, we recognize revenue when title to the goods and risk of loss transfer to customers, provided there are no remaining performance obligations that will affect the customer’s final acceptance of the sale. Our policy is to classify shipping and handling costs billed to customers as sales and the related expenses as cost of goods sold. In general, our customers do not have any rights of return or exchange.
Accounts Receivable and Allowance for Doubtful Accounts. The majority of our accounts receivable is composed of amounts due from hospitals. Accounts receivable is carried at cost less an allowance for doubtful accounts. On a regular basis, we evaluate accounts receivable and estimate an allowance for doubtful accounts, as needed, based on various factors such as customers’ current credit conditions, length of time past due, and the general economy as a whole. Receivables are written off against the allowance when they are deemed uncollectible.
Excess and Obsolete Inventory. We state inventories at the lower of cost or market. We determine cost on a first-in, first-out basis. The majority of our inventory is finished goods, because we primarily utilize third-party suppliers to source our products. We periodically evaluate the carrying value of our inventories in relation to the estimated forecast of product demand, which takes into consideration the estimated life cycle of product releases. When quantities on hand exceed estimated sales forecasts, we record a reserve for excess inventories, which results in a corresponding charge to cost of goods sold. Charges incurred for excess and obsolete inventory were $7.0 million, $8.2 million and $6.1 million for the years ended December 31, 2014, 2013 and 2012, respectively.
The need to maintain substantial levels of inventory impacts the risk of carrying excess inventory. Many of our products come in sets which feature components in a variety of sizes so that the implant or device may be customized to the patient’s needs. In order to market our products effectively, we must often maintain and provide surgeons and hospitals with consignment implant sets, back-up products and products of different sizes. For each surgery, fewer than all of the components of the set are used, and therefore certain portions of the set may be considered excess inventory since they are not likely to be used. One of our primary business goals is to focus on continual product innovation. Though we believe this provides us with a competitive advantage, it also increases the risk that our products will become excess or obsolete inventory prior to sale or prior to the end of their anticipated useful lives. When we introduce new products or next-generation products, we may be required to take charges for excess and obsolete inventory that have a significant impact on the value of our inventory or on our operating results.
Goodwill and Intangible Assets. Goodwill represents the excess purchase price over the fair values of the identifiable assets acquired less the liabilities assumed. We acquired goodwill in connection with the various acquisitions completed. Goodwill is tested for impairment at a minimum on an annual basis. The
fair value is estimated using an income and discounted cash flow approach. We completed our annual goodwill and intangible assets impairment test in the fourth quarter of 2014 and determined that there was no impairment.
Intangible assets consist of purchased in-process research and development (“IPR&D”), patents, customer relationships, supplier networks and non-compete agreements. Intangible assets with finite useful lives are amortized over the period of estimated benefit using the straight-line method and estimated useful lives ranging from one to seventeen years. Intangible assets are tested for impairment annually or whenever events or circumstances indicate that a carrying amount of an asset (asset group) may not be recoverable. If impairment is indicated, we measure the amount of the impairment loss as the amount by which the carrying amount exceeds the fair value of the asset. Fair value is generally determined using a discounted future cash flow analysis.
IPR&D has an indefinite life and is not amortized until completion and development of the project at which time the IPR&D becomes an amortizable asset. If the related project is not completed in a timely manner, we may have an impairment related to the IPR&D, calculated as the excess of the asset’s carrying value over its fair value.
Long-Lived Assets. We periodically evaluate the recoverability of the carrying amount of long-lived assets, which include property and equipment, whenever events or changes in circumstances indicate that the carrying amount of an asset may not be fully recoverable. We assess impairment when the undiscounted future cash flows from the use and eventual disposition of an asset are less than its carrying value. If impairment is indicated, we measure the amount of the impairment loss as the amount by which the carrying amount exceeds the fair value of the asset. We base our fair value methodology on quoted market prices, if available. If quoted market prices are not available, we estimate fair value based on prices of similar assets or other valuation techniques including present value techniques.
Income Taxes. We recognize deferred tax assets and liabilities for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. We measure deferred tax assets and liabilities using enacted tax rates expected to apply to taxable income in the year in which such items are expected to be received or settled. We recognize the effect on deferred tax assets and liabilities of a change in tax rates in the period that includes the enactment date. We establish a valuation allowance to offset any deferred tax assets if, based upon available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
While we believe that our tax positions are fully supportable, there is a risk that certain positions could be challenged successfully. In these instances, we look to establish reserves. If we determine that a tax position is more likely than not of being sustained upon audit, based solely on the technical merits of the position, we recognize the benefit. We measure the benefit by determining the amount that has likelihood greater than 50% of being realized upon settlement. We presume that all tax positions will be examined by a taxing authority with full knowledge of all relevant information. We regularly monitor our tax positions, tax assets and tax liabilities. We reevaluate the technical merits of our tax positions and recognize an uncertain tax benefit or reverse a previously recorded tax benefit when (i) a tax audit is completed, (ii) applicable tax law, including a tax case or legislative guidance, changes or (iii) the statute of limitations expires. Significant judgment is required in accounting for tax reserves.
Legal Proceedings. We are involved in a number of legal actions involving both product liability and intellectual property disputes. The outcomes of these legal actions are not within our complete control and may not be known for prolonged periods of time. In some actions, the claimants seek damages as well as other relief, including injunctions barring the sale of products that are the subject of the lawsuit, that could
require significant expenditures or result in lost sales. In accordance with authoritative guidance, we record a liability in our consolidated financial statements for these actions when a loss is known or considered probable and the amount can be reasonably estimated. If the reasonable estimate of a known or probable loss is a range, and no amount within the range is a better estimate than any other, the minimum amount of the range is accrued. If a loss is possible, but not known or probable, and can be reasonably estimated, the estimated loss or range of loss is disclosed in the notes to the consolidated financial statements. In most cases, significant judgment is required to estimate the amount and timing of a loss to be recorded. While it is not possible to predict the outcome for these matters, we believe it is possible that costs associated with them could have a material adverse impact on our consolidated earnings, financial position or cash flows.
Stock-Based Compensation Expense. We measure the cost for employee and non-employee awards at the grant date based on the fair value of the award. For employee awards, we amortize the expense, which is the fair value of the portion of the award that is ultimately expected to vest, over the requisite service periods (generally the vesting period of the equity award). We record the awards issued to non-employees at their fair value as determined in accordance with authoritative guidance, and we periodically revalue the awards as they vest, recognizing the expense over the requisite service period. We estimate the fair value of stock options using a Black-Scholes option-pricing model. Our determination of the fair value is affected by our stock price and a number of assumptions, including expected volatility, expected term, risk-free interest rate and expected dividends.
As we have only recently become a public entity, historic volatility is not available for our common stock. As a result, we estimate volatility based on a peer group of public companies that we believe collectively provides a reasonable basis for estimating volatility. We intend to continue to consistently use the same group of publicly traded peer companies to determine volatility in the future until sufficient information regarding volatility of the price of our shares of Class A common stock becomes available or the selected companies are no longer suitable for this purpose.
We do not have sufficient history of stock option exercises as a public company available that is indicative of future exercise and post-vesting behavior to estimate the expected term after our initial public offering (“IPO”). As a result, we use the simplified method of estimating the expected term, under which the expected term is presumed to be the mid-point between the vesting date and the contractual end of the term. We base the risk-free interest rate on observed interest rates of U.S. Treasury securities equivalent to the expected terms of the stock options. We estimate our pre-vesting forfeiture rate based on our historical experience. Our dividend yield assumption is based on the history and expectation of no dividend payouts.
We estimate the weighted-average fair value of the options granted using a Black-Scholes option-pricing model, which requires the input of subjective assumptions, including the expected stock price volatility, the calculation of expected term and fair value of the underlying common stock on the date of grant, among other inputs.
To the extent that further evidence regarding these variables is available and provides estimates that we believe are more indicative of actual trends, we may refine or change our approach to deriving these input estimates. Any such changes could materially affect the stock-based compensation expense we record in the future.
We expect to continue to grant stock options in the future, and to the extent that we do, our actual stock-based compensation expense recognized may increase.
Significant Factors Used in Determining Fair Value of Our Common Stock. Prior to our IPO, our Board, with the assistance of management, used the market approach and the income approach in order to
estimate the fair value of common stock underlying our option grants during those periods. Prior to our IPO, there had been no public market for our common stock. Our Board had determined the fair value of our common stock by utilizing, among other things, independent third-party valuation studies conducted following our equity financing in 2007 and biannually as of April 30 and October 31 until October of 2011. The findings of these valuations were based on our business and general economic, market and other conditions that could be reasonably evaluated at that time. The analyses of the valuation studies included a review of our company, including our financial results and capital structure, as well as an independent third-party review of the conditions of the industry in which we operate and the markets that we serve. The methodologies and assumptions used were consistent with those set forth in the American Institute of Certified Public Accountants (the “AICPA”), in the AICPA Technical Practice Guide, Valuations of Privately-Held Company Equity Securities Issued as Compensation.
Results of Operations
Year Ended December 31, 2014 Compared to the Year Ended December 31, 2013
Sales
The following table sets forth, for the periods indicated, our sales by product category and geography expressed as dollar amounts and the changes in sales between the specified periods expressed in dollar amounts and as percentages:
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Innovative Fusion | $ | 270,852 |
| | $ | 254,033 |
| | $ | 16,819 |
| | 6.6 | % |
Disruptive Technology | 203,519 |
| | 180,426 |
| | 23,093 |
| | 12.8 | % |
Total sales | $ | 474,371 |
| | $ | 434,459 |
| | $ | 39,912 |
| | 9.2 | % |
Product launches continue to be a driving force in our sales growth, particularly from products launched during the last three years. The growth in Disruptive Technology of $23.1 million was due primarily to sales of minimally invasive, biologic, artificial disc and interventional pain management products launched during the past three years in addition to the sales from TTOT since the acquistion in late 2014. Innovative Fusion sales increased by $16.8 million due to strong sales of legacy and new pedicle screw systems.
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
United States | $ | 427,091 |
| | $ | 396,615 |
| | $ | 30,476 |
| | 7.7 | % |
International | 47,280 |
| | 37,844 |
| | 9,436 |
| | 24.9 | % |
Total sales | $ | 474,371 |
| | $ | 434,459 |
| | $ | 39,912 |
| | 9.2 | % |
In the United States, the increase in sales of $30.5 million was due primarily to expansion into new territories and increased penetration in existing territories. We saw strong sales in both Disruptive Technology and Innovative Fusion products, led by sales of legacy and new pedicle screw systems.
Internationally, the increase in sales of $9.4 million was due primarily to increased market penetration in existing international territories, as well as sales from expansion into five new countries and new territories in existing countries, with sales increases primarily driven by pedicle screw, minimally invasive and interbody systems.
Cost of Goods Sold
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Cost of goods sold | $ | 110,857 |
| | $ | 100,343 |
| | $ | 10,514 |
| | 10.5 | % |
Percentage of sales | 23.4 | % | | 23.1 | % | | | | |
The increase in cost of goods sold was due primarily to $7.8 million of increased sales volume and mix, an increase of $2.8 million in freight, and an increase of $2.1 million in depreciation, offset partially by a decrease of $2.2 million for inventory reserves and write-offs and a decrease of $0.7 million due to changes in material and other costs.
Research and Development Expenses
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Research and development | $ | 31,687 |
| | $ | 26,870 |
| | $ | 4,817 |
| | 17.9 | % |
Percentage of sales | 6.7 | % | | 6.2 | % | | | | |
The increase in research and development expenses was due primarily to an increase of $3.4 million in employee compensation, due primarily to increased headcount, including employees for the recently acquired surgical robotic positioning system and TTOT, and an increase of $1.4 million in project and clinical trial costs.
Selling, General and Administrative Expenses
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Selling, general and administrative | $ | 187,798 |
| | $ | 182,518 |
| | $ | 5,280 |
| | 2.9 | % |
Percentage of sales | 39.6 | % | | 42.0 | % | | | | |
The increase in selling, general and administrative expenses was due primarily to an increase of $2.7 million for expansion and growth of our international sales efforts, $3.1 million related to increased compensation costs in the United States to support increased sales volume and company growth, and an increase of $1.4 million in legal expenses and other selling, general and administrative costs, offset by a decrease of $1.9 million related to the reduction of an acquisition related contingent liability.
Provision for Litigation Loss/(Income)
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Provision for litigation loss/(income) | $ | 5,667 |
| | $ | 23,055 |
| | $ | (17,388 | ) | | (75.4 | )% |
Percentage of sales | 1.2 | % | | 5.3 | % | | | | |
The provision for litigation in the current year was due primarily to the Bianco, Altus and other litigation matters. In the prior year we recognized the DePuy Synthes charge of $18.2 million.
For additional information regarding litigation, please refer to “Item 8. Financial Statements and Supplementary Data; Notes to Consolidated Financial Statements; Note 14. Commitments and Contingencies” below for more information.
Other Income, Net
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Other income, net | $ | 280 |
| | $ | 328 |
| | $ | (48 | ) | | (14.6 | )% |
Percentage of sales | 0.1 | % | | 0.1 | % | | | | |
The decrease in other income, net is due primarily to increases in foreign exchange losses and decreases in miscellaneous income, partially offset by increases in interest income.
Income Tax Provision
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2014 | | December 31, 2013 | | $ | | % |
Income tax provision | $ | 46,157 |
| | $ | 33,389 |
| | $ | 12,768 |
| | 38.2 | % |
Effective income tax rate | 33.3 | % | | 32.7 | % | | | | |
The increase in the effective tax rate was due primarily to the timing of the previous American Taxpayer Relief Act of 2012 (the “ATRA”). Under prior law, a taxpayer was entitled to a research and experimentation tax credit for qualifying amounts incurred through December 31, 2011. The ATRA, which was signed into law on January 2, 2013, extended the research and experimentation tax credit from January 1, 2012 through December 31, 2013. However, as of December 31, 2012, no benefit could be recognized for this tax credit, and therefore, we recognized the credit during 2013 in accordance with accounting guidance.
Year Ended December 31, 2013 Compared to the Year Ended December 31, 2012
Sales
The following table sets forth, for the periods indicated, our sales by product category and geography expressed as dollar amounts and the changes in sales between the specified periods expressed in dollar amounts and as percentages:
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Innovative Fusion | $ | 254,033 |
| | $ | 238,723 |
| | $ | 15,310 |
| | 6.4 | % |
Disruptive Technology | 180,426 |
| | 147,271 |
| | 33,155 |
| | 22.5 | % |
Total sales | $ | 434,459 |
| | $ | 385,994 |
| | $ | 48,465 |
| | 12.6 | % |
Product launches continue to be a driving force in our sales growth, particularly from products launched during the last three years. The growth in Disruptive Technology of $33.2 million was due primarily to sales of minimally invasive, biologic, artificial disc and interventional pain management products launched during the past three years. Innovative Fusion sales increased by $15.3 million due to strong sales of legacy and new pedicle screw systems.
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
United States | $ | 396,615 |
| | $ | 355,609 |
| | $ | 41,006 |
| | 11.5 | % |
International | 37,844 |
| | 30,385 |
| | 7,459 |
| | 24.5 | % |
Total sales | $ | 434,459 |
| | $ | 385,994 |
| | $ | 48,465 |
| | 12.6 | % |
In the United States, the increase in sales of $41.0 million was due primarily to increased sales of Disruptive Technology products and increased productivity from sales representatives.
Internationally, the increase in sales of $7.5 million was due primarily to increased sales of Innovative Fusion products including pedicle screw and interbody systems, increased market penetration in existing country territories, as well as sales from expansion into new countries and territories.
Cost of Goods Sold
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Cost of goods sold | $ | 100,343 |
| | $ | 75,199 |
| | $ | 25,144 |
| | 33.4 | % |
Percentage of sales | 23.1 | % | | 19.5 | % | | | | |
The increase in cost of goods sold was due to increased sales volume (an increase in cost of sales of $8.6 million), the Medical Device Excise Tax ($7.2 million), increases in inventory reserves and write-offs due to new product launches of $4.1 million and an increase in depreciation of surgical instruments and cases, distribution and other costs of approximately$3.9 million . Additionally, a $1.3 million provision for litigation loss was recorded as a component of cost of sales related to the unfavorable jury verdict in one of our pending lawsuits (see Provision for Litigation Loss/(Income) below).
Research and Development Expenses
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Research and development | $ | 26,870 |
| | $ | 27,926 |
| | $ | (1,056 | ) | | (3.8 | )% |
Percentage of sales | 6.2 | % | | 7.2 | % | | | | |
The decrease in research and development expenses was due to a decrease of $1.7 million in supplies, outside services and other costs, offset by an increase of $0.4 million in employee compensation due primarily to increased headcount and an increase of $0.2 million in clinical trial and other costs.
Selling, General and Administrative Expenses
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Selling, general and administrative | $ | 182,518 |
| | $ | 168,862 |
| | $ | 13,656 |
| | 8.1 | % |
Percentage of sales | 42.0 | % | | 43.7 | % | | | | |
The increase in selling, general and administrative expenses was due primarily to an increase of $9.5 million in compensation costs in the United States. This was to support increased sales volume and company growth, including hiring additional sales representatives, and general administrative personnel. Additionally, the costs to support international sales growth and expansion into new international territories increased by $2.2 million; and there was an increase of $2.0 million of other selling, general and administrative costs.
Provision for Litigation Loss/(Income)
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Provision for litigation loss/(income) | $ | 23,055 |
| | $ | (786 | ) | | $ | 23,841 |
| | (3,033.2 | )% |
Percentage of sales | 5.3 | % | | (0.2 | )% | | | | |
The increase in provision for litigation loss was due primarily to unfavorable jury verdicts in two lawsuits. On June 14, 2013, the jury returned a verdict in a patent infringement case in the U.S. District Court in Delaware brought by DePuy Synthes against us. The jury found that prior versions of three products we previously sold did infringe on DePuty Synthes’ patents and awarded monetary damages. The jury also upheld the validity of DePuy Synthes’ patents. There was no finding of willful infringement. As a result of the verdict, we recorded $18.2 million in damages and other litigation-related costs in addition to the $1.3 million recorded as a component of cost of goods sold noted above.
Additionally, on January 17, 2014, the jury returned a verdict in a misappropriation of trade secret suit filed against us in the Federal District Court for the Eastern District of Texas by Sabatino Bianco. The jury found in favor of Bianco on a claim of misappropriation of trade secret. The jury found against Bianco on the claims of breach of contract and disgorgement of profits. As a result of the verdict, we recorded $4.3 million in damages.
The provision for litigation income in the prior year was due to the favorable settlement of a lawsuit .
Other Income/(Expense), Net
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Other income/(expense), net | $ | 328 |
| | $ | (140 | ) | | $ | 468 |
| | (334.3 | )% |
Percentage of sales | 0.1 | % | | — | % | | | | |
The change in other income/(expense), net is attributable to gains recorded as a result of insurance claims, interest and other income, net of the effect of changes in foreign exchange rates on payables and receivables held in currencies other than their functional (local) currency.
Income Tax Provision
|
| | | | | | | | | | | | | | |
| Year Ended | | Change |
(In thousands, except percentages) | December 31, 2013 | | December 31, 2012 | | $ | | % |
Income tax provision | $ | 33,389 |
| | $ | 40,822 |
| | $ | (7,433 | ) | | (18.2 | )% |
Effective income tax rate | 32.7 | % | | 35.6 | % | | | | |
The decrease in the effective tax rate was due primarily to the increase in the domestic production activities deduction and the timing of the American Taxpayer Relief Act of 2012 (the “ATRA”). Under prior law, a taxpayer was entitled to a research and experimentation tax credit for qualifying amounts incurred through December 31, 2011. The ATRA, which was signed into law on January 2, 2013, extended the research and experimentation tax credit from January 1, 2012 through December 31, 2013. However, as of December 31, 2012, no benefit could be recognized for this tax credit, and therefore, we recognized the credit during 2013 in accordance with accounting guidance.
Non-GAAP Financial Measures
To supplement our financial statements prepared in accordance with U.S. generally accepted accounting principles (“U.S. GAAP”), management uses certain non-GAAP financial measures. For example, Adjusted EBITDA, which represents net income before interest (income)/expense, net and other non-operating expenses, provision for income taxes, depreciation and amortization, stock-based compensation, changes in the fair value of contingent consideration in connection with business acquisitions and other acquisition related costs, provision for litigation loss/(income), and provision for litigation loss -cost of goods sold, is useful as an additional measure of operating performance, and particularly as a measure of comparative operating performance from period to period, as it is reflective of changes in pricing decisions, cost controls and other factors that affect operating performance, and it removes the effect of our capital structure, asset base, income taxes and interest income and expense. Our management also uses Adjusted EBITDA for planning purposes, including the preparation of our annual operating budget and financial projections.
The following is a reconciliation of Adjusted EBITDA to net income for the periods presented:
|
| | | | | | | | | | | | |
| | Year Ended |
(In thousands, except percentages) | | December 31, 2014 | | December 31, 2013 | | December 31, 2012 |
Net income | | $ | 92,485 |
| | $ | 68,612 |
| | $ | 73,831 |
|
Interest income, net | | (805 | ) | | (467 | ) | | (80 | ) |
Provision for income taxes | | 46,157 |
| | 33,389 |
| | 40,822 |
|
Depreciation and amortization | | 21,754 |
| | 19,397 |
| | 18,108 |
|
EBITDA | | 159,591 |
| | 120,931 |
| | 132,681 |
|
Stock-based compensation | | 7,111 |
| | 5,177 |
| | 4,635 |
|
Provision for litigation loss/(income) | | 5,667 |
| | 23,055 |
| | (786 | ) |
Provision for litigation loss - cost of good sold | | — |
| | 1,260 |
| | — |
|
Change in fair value of contingent consideration and other acquisition related costs | | (937 | ) | | 120 |
| | 119 |
|
Adjusted EBITDA | | $ | 171,432 |
| | $ | 150,543 |
| | $ | 136,649 |
|
Adjusted EBITDA as a percentage of sales | | 36.1 | % | | 34.7 | % | | 35.4 | % |
Adjusted EBITDA for the years ended December 31, 2014 and 2013 was unfavorably affected by 1.5% and 1.6%, respectively, due to the impact of the MDET that went into effect on January 1, 2013. The impact of MDET was partially offset by operating efficiencies with respect to selling, general & administrative expenses.
In addition, for the year ended December 31, 2014 and for other comparative periods, we are presenting a non-GAAP measure of Diluted Earnings Per Share, which represents diluted earnings per share before provision for litigation loss/(income) and provision for litigation loss - cost of goods sold, net of the tax effects of such provisions. We believe this non-GAAP measure is also a useful indicator of our operating
performance, and particularly as an additional measure of comparative operative performance from period to period as it removes the effects of litigations which we believe are not reflective of underlying business trends.
The following is a reconciliation of non-GAAP Diluted Earnings Per Share to Diluted Earnings Per Share as computed in accordance with U.S. GAAP for the periods presented.
|
| | | | | | | | | | | | |
| | Year Ended |
(Per share amounts) | | December 31, 2014 | | December 31, 2013 | | December 31, 2012 |
Diluted earnings per share, as reported | | $ | 0.97 |
| | $ | 0.73 |
| | $ | 0.80 |
|
Provision for litigation loss/(income), net of taxes | | 0.04 |
| | 0.16 |
| | (0.01 | ) |
Provision for litigation loss - cost of goods sold, net of taxes | | — |
| | 0.01 |
| | — |
|
Non-GAAP diluted earnings per share | | $ | 1.01 |
| | $ | 0.90 |
| | $ | 0.79 |
|
We also define Free Cash Flow as the net cash flows provided by operating activities, adjusted for the impact of restricted cash, less the cash impact of purchases of property and equipment. We believe that this financial measure provides meaningful information for evaluating our overall financial performance for the comparative periods as it facilitates an assessment of funds available to satisfy current and future obligations and fund acquisitions. Below is a reconciliation of Free Cash Flow to net cash provided by operating activities as computed in accordance with U.S. GAAP.
|
| | | | | | | | | | | | |
| | Year Ended |
(Per share amounts) | | December 31, 2014 | | December 31, 2013 | | December 31, 2012 |
Net cash provided by operating activities | | $ | 79,172 |
| | $ | 93,471 |
| | $ | 76,519 |
|
Adjustment for impact of restricted cash | | 23,370 |
| | — |
| | — |
|
Purchases of property and equipment | | (24,754 | ) | | (23,680 | ) | | (24,684 | ) |
Free cash flow | | $ | 77,788 |
| | $ | 69,791 |
| | $ | 51,835 |
|
In December 2014, we set aside $23.4 million in cash for the payment of a portion of the Synthes and Bianco litigations. We classified this cash as restricted, as the amount was placed in escrow to be used for payment of the litigation obligations, should we not be successful with our appeals. Restricted cash unfavorably affected our net cash provided by operating activities for the year ended December 31, 2014. (For additional information regarding litigation, please refer to “Item 8. Financial Statements and Supplementary Data; Notes to Consolidated Financial Statements; Note 14. Commitments and Contingencies” below for more information.)
Adjusted EBITDA, non-GAAP Diluted Earnings Per Share and Free Cash Flow are not calculated in conformity with U.S. GAAP within the meaning of Item 10 of Regulation S-K. Non-GAAP financial measures have limitations as analytical tools and should not be considered in isolation or as a substitute for financial measures prepared in accordance with U.S. GAAP. These measures do not include certain expenses that may be necessary to evaluate our liquidity or operating results. Our definitions of Adjusted EBITDA, non-GAAP Diluted Earnings Per Share and Free Cash Flow may differ from that of other companies and therefore may not be comparable.
Cash Flows
The following table summarizes, for the periods indicated, cash flows from operating, investing and financing activities:
|
| | | | | | | | | | | | | | | | | | | |
| Year Ended | | 2014 - 2013 Change | | 2013 - 2012 Change |
(In thousands) | December 31, 2014 | | December 31, 2013 | | December 31, 2012 | | $ | | $ |
Net cash provided by operating activities | $ | 79,172 |
| | $ | 93,471 |
| | $ | 76,519 |
| | $ | (14,299 | ) | | $ | 16,952 |
|
Net cash used in investing activities | (100,000 | ) | | (227,150 | ) | | (30,715 | ) | | 127,150 |
| | (196,435 | ) |
Net cash provided by financing activities | 12,946 |
| | 11,011 |
| | 24,025 |
| | 1,935 |
| | (13,014 | ) |
Effect of foreign exchange rate changes on cash | 185 |
| | 230 |
| | (97 | ) | | (45 | ) | | 327 |
|
Increase/(decrease) in cash and cash equivalents | $ | (7,697 | ) | | $ | (122,438 | ) | | $ | 69,732 |
| | $ | 114,741 |
| | $ | (192,170 | ) |
The decrease in cash and cash equivalents for the year ended December 31, 2014 was due primarily to our continued cash management program to invest in more marketable securities in an effort to increase the returns on our cash and cash equivalents. During the year ended December 31, 2014, we purchased $39.1 million of marketable securities, net of maturities and sales. Our investment in marketable securities includes municipal bonds, corporate debt securities, commercial paper, securities of U.S. government-sponsored agencies and asset-backed securities, and are classified as available-for-sale as of December 31, 2014. In addition to our purchases of property and equipment in the normal course of business, we also used $36.1 million for the purchase of TTOT. Furthermore, during December 2014, we set aside $23.4 million as restricted cash during the appeals of two litigation cases, which unfavorably affected net cash provided by operations. During the year ended December 31, 2014, our total cash, cash equivalents, and marketable securities increased $28.6 million See “Liquidity and Capital Resources” below.
Cash Provided by Operating Activities
The decrease in net cash provided by operating activities for the year ended December 31, 2014 was due primarily to an increase in restricted cash of $23.4 million, offset partially by the $11.8 million increase in net income excluding provision for litigation (net of taxes).
The increase in net cash provided by operating activities for the year ended December 31, 2013 was due primarily to an increase in net income excluding accrued expenses from the DePuy Synthes and Bianco litigation verdicts of $10.5 million, a decrease in income tax payments over the prior year period of $6.2 million, a decrease in the change in inventories of $3.9 million and by a decrease in prepaid expense and other expenses of $1.0 million, offset by a decrease in the change in accounts payable and accounts payable to related party of $2.5 million, and an increase in the change in accounts receivable of $2.7 million.
Cash Used in Investing Activities
The decrease in net cash used in investing activities was due primarily to the $147.6 million decrease in the amount of cash invested in marketable securities in comparative periods. During the year ended December 31, 2014 we had a net outflow of $39.1 million of cash invested in marketable securities, net of maturities and sales, whereas in the prior year, we had a net cash outflow of $186.7 million. This increase was partilly offset by an increase in cash used for acquisitions of $19.4 million.
The increase in net cash used in investing activities for the year ended December 31, 2013 was attributable to $186.7 million of cash invested in marketable securities, net of maturities and sales, the increase
in cash used for acquisitions of $10.7 million, partially offset by a $1.0 million decrease in the purchases of property and equipment over the prior year.
Cash Provided by Financing Activities
The cash provided by financing activities for the year ended December 31, 2014 was due primarily to the net proceeds of $9.7 million received from the issuance of common stock from the exercise of stock options along with the $4.4 million increase in our excess tax benefit related to our nonqualified stock option exercises.
The cash provided by financing activities for the year ended December 31, 2013 was due primarily to the net proceeds of $7.6 million received from the issuance of common stock from the exercise of stock options along with the $4.8 million increase in our excess tax benefit related to our nonqualified stock option exercises.
Liquidity and Capital Resources
The following table highlights certain information related to our liquidity and capital resources:
|
| | | | | | | |
(In thousands) | December 31, 2014 | | December 31, 2013 |
Cash and cash equivalents | $ | 82,265 |
| | $ | 89,962 |
|
Short-term marketable securities | 146,439 |
| | 148,962 |
|
Long-term marketable securities | 75,347 |
| | 36,528 |
|
Total cash, cash equivalents and marketable securities | $ | 304,051 |
| | $ | 275,452 |
|
| | | |
Available borrowing capacity under revolving credit facility | 50,000 |
| | 50,000 |
|
Working capital | $ | 380,613 |
| | $ | 348,866 |
|
During the year ended December 31, 2014, our total cash, cash equivalents and marketable securities increased $28.6 million, primarily as a result of our cash provided by operating activities. Our investment in marketable securities includes municipal bonds, corporate debt securities, commercial paper, securities of U.S. government-sponsored agencies and asset-backed securities, and are classified as available-for-sale as of December 31, 2014.
On February 25, 2015, we entered into an agreement to acquire medical device manufacturer Branch Medical Group, Inc. (“BMG”). Under the terms of the agreement we have agreed to pay approximately $52.9 million in cash subject to certain closing adjustments for BMG on a cash-free, debt-free basis. We expect the closing of the acquisition to occur in March 2015 following satisfaction of the applicable closing conditions.
In May 2011, we entered into a credit agreement with Wells Fargo Bank related to a revolving credit facility that provides for borrowings up to $50.0 million. At our request, and with the approval of the bank, the amount of borrowings available under the revolving credit facility can be increased to $75.0 million. The revolving credit facility includes up to a $25.0 million sub-limit for letters of credit. As amended to date, the revolving credit facility extends to May 2015. Cash advances bear interest at our option either at a fluctuating rate per annum equal to the daily LIBOR in effect for a one-month period plus 0.75% or a fixed rate for a one- or three-month period equal to LIBOR plus 0.75%. The credit agreement governing the revolving credit facility also subjects us to various restrictive covenants, including the requirement to maintain maximum consolidated leverage. The covenants also include limitations on our ability to repurchase shares,
to pay cash dividends or to enter into a sale transaction. As of December 31, 2014, we were in compliance with all covenants under the credit agreement, there were no outstanding borrowings under the revolving credit facility and available borrowings were $50.0 million. We may terminate the credit agreement at any time on ten days’ notice without premium or penalty.
In addition to our existing cash and marketable securities balances, our principal sources of liquidity are cash flow from operating activities and our revolving credit facility, which was fully available as of December 31, 2014. We believe these sources will provide sufficient liquidity for us to meet our liquidity requirements for the foreseeable future. Our principal liquidity requirements are to meet our working capital, research and development, including clinical trials, and capital expenditure needs, principally for our surgical sets required to maintain and expand our business and potential future business or intellectual property acquisitions. We expect to continue to make investments in surgical sets as we launch new products, increase the sizes of our U.S. sales force, and expand into international markets. We may, however, require additional liquidity as we continue to execute our business strategy. Our liquidity may be negatively impacted as a result of a decline in sales of our products, including declines due to changes in our customers’ ability to obtain third-party coverage and reimbursement for procedures that use our products, increased pricing pressures resulting from intensifying competition, cost increases and slower product development cycles resulting from a changing regulatory environment; and unfavorable results from litigation which will affect our cash flow. We anticipate that to the extent that we require additional liquidity, it will be funded through the incurrence of other indebtedness, additional equity financings or a combination of these potential sources of liquidity. The sale of additional equity may result in dilution to our stockholders. There is no assurance that we will be able to secure such additional funding on terms acceptable to us, or at all.
Contractual Obligations and Commitments
The following table summarizes our outstanding contractual obligations as of December 31, 2014. There have been no material changes in our remaining contractual obligations since that time.
|
| | | | | | | | | | | | | | | | | | | | |
| | Payments Due by Period |
(In thousands) | | Total | | Less than 1 Year | | 1-3 Years | | 3-5 Years | | More than 5 Years |
Operating leases | | $ | 1,630 |
| | $ | 700 |
| | $ | 825 |
| | $ | 105 |
| | $ | — |
|
Purchase obligations(1) | | 699 |
| | 649 |
| | 50 |
| | — |
| | — |
|
Deferred purchase price liabilities(2) | | 2,000 |
| | 1,200 |
| | 800 |
| | — |
| | — |
|
Total | | $ | 4,329 |
| | $ | 2,549 |
| | $ | 1,675 |
| | $ | 105 |
| | $ | — |
|
______________
| |
(1) | Reflects minimum annual volume commitments to purchase inventory under certain of our supplier contracts. |
| |
(2) | In connection with acquisitions completed in 2014 though 2011, we have certain contingent consideration obligations payable to the sellers in these transactions upon the achievement of certain regulatory and sales milestones. The maximum aggregate undiscounted amounts potentially payable not included in the table above total $38.9 million. |
Off-Balance Sheet Arrangements
We do not have any off-balance sheet arrangements.
Related-Party Transactions
For a description of our related-party transactions, see “Item 8. Financial Statements and Supplementary Data; Notes to Consolidated Financial Statements; Note 16. Related-Party Transactions” and “Item 13. Certain Relationships and Related Transactions, and Director Independence; Related Person Transactions.”
Recently Issued Accounting Pronouncements
In May 2014, the FASB and the International Accounting Standards Board released a standard on the recognition of revenue from contracts with customers that is designed to create greater comparability for financial statement users across industries and jurisdictions. Under the new standard, an entity will recognize revenue to depict the transfer of goods or services to customers in amounts that reflect the payment to which the entity expects to be entitled in exchange for those goods or services. The standard also will require enhanced disclosures and provide more comprehensive guidance for transactions such as service revenue and contract modifications. The standard will take effect for public companies for annual reporting periods beginning after December 15, 2016, and early adoption is prohibited. Entities can transition to the standard either retrospectively or as a cumulative-effect adjustment as of the date of adoption. We are currently evaluating the impact of the new standard on our financial position, results of operations and disclosures.
Item 7A. Quantitative and Qualitative Disclosure About Market Risk
Market risk is the potential loss arising from adverse changes in the financial markets. We are exposed to various market risks, which may result in potential losses arising from adverse changes in market rates, such as interest rates and foreign exchange rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes and do not believe we are exposed to material market risk with respect to our cash, cash equivalents and marketable debt securities. We also believe that there has been no material quantitative changes in our market risk exposure between December 31, 2014 and December 31, 2013.
Interest Rate Risk
Our exposure to interest rate risk relates primarily to our revolving credit facility and our investments in cash equivalents and marketable debt securities portfolio. At December 31, 2014, we had no debt outstanding under our revolving credit facility and therefore were not exposed to interest rate risk with respect to interest payable under that facility.
In general, our investments in cash equivalents and marketable debt securities are governed by our investment policy, which has been approved by our Board of Directors. Our investment policy seeks to preserve the value of capital, consistent with maximizing return on our investments while maintaining adequate liquidity. In 2013, we changed our cash management program to invest in more marketable securities in an effort to increase returns on our cash and cash equivalents. To achieve our investment objectives, we maintain a portfolio of various holdings, types and maturities and invest in securities that meet or exceed our investment policy standards, such as high credit quality debt securities.
We continue to be exposed to interest rate risk related to our cash equivalents and marketable securities. Generally, our interest rate risk with respect to these investments is limited due to yields earned. Changes in the overall level of interest rates affect the interest income generated by our cash, cash equivalents and marketable securities. Our investment policy limits the amount of credit exposure to any one issue, issuer or type of security. Our securities all have maturity dates within three years of the date of purchase and are designated as available for sale. As of December 31, 2014, we believe that a hypothetical 10% change in interest rates would not materially affect the underlying valuation of our marketable securities.
Foreign Exchange Risk
We operate in countries other than the United States and, therefore, we are exposed to foreign currency
risks. We bill most direct sales outside of the United States in local currencies. We expect that the percentage of our sales denominated in foreign currencies will increase in the foreseeable future as we continue to expand into international markets. When sales or expenses are not denominated in U.S. dollars, a fluctuation in exchange rates could affect our net income. We believe that the risk of a significant impact on our operating income from foreign currency fluctuations is minimal. We believe that a 10% change in foreign currency exchange rates would not have a material impact on our financial condition, results of operations or cash flows. We do not currently hedge our exposure to foreign currency exchange rate fluctuations; however, we may choose to hedge our exposure in the future.
Item 8. Financial Statements and Supplementary Data
GLOBUS MEDICAL, INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
|
| |
Report of Independent Registered Public Accounting Firm | |
Consolidated Balance Sheets | |
Consolidated Statements of Income | |
Consolidated Statements of Comprehensive Income | |
Consolidated Statements of Equity | |
Consolidated Statements of Cash Flows | |
Notes to Consolidated Financial Statements | |
Report of Independent Registered Public Accounting Firm
The Board of Directors and Stockholders
Globus Medical, Inc.:
We have audited the accompanying consolidated balance sheets of Globus Medical, Inc. and subsidiaries as of December 31, 2014 and 2013, and the related consolidated statements of income, comprehensive income, equity and cash flows for each of the years in the three‑year period ended December 31, 2014. In connection with our audits of the consolidated financial statements, we also have audited financial statement schedule II in Item 15 (a) (2). We also have audited Globus Medical, Inc.’s internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Globus Medical, Inc.’s management is responsible for these consolidated financial statements and financial statement schedule, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Report of Management on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule and an opinion on the Company’s internal control over financial reporting based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Globus Medical, Inc. and subsidiaries as of December 31, 2014 and 2013, and the results of their operations and their cash flows for each of the years in the three‑year period ended December 31, 2014, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein. Also in our opinion, Globus Medical, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
/s/ KPMG LLP
Philadelphia, Pennsylvania
February 26, 2015
GLOBUS MEDICAL, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
|
| | | | | | | |
(In thousands, except par value) | December 31, 2014 | | December 31, 2013 |
| | | |
ASSETS | | | |
Current assets: | | | |
Cash and cash equivalents | $ | 82,265 |
| | $ | 89,962 |
|
Restricted cash | 23,370 |
| | — |
|
Short-term marketable securities | 146,439 |
| | 148,962 |
|
Accounts receivable, net of allowances of $1,647 and $1,581, respectively | 75,430 |
| | 62,414 |
|
Inventories | 90,945 |
| | 70,350 |
|
Prepaid expenses and other current assets | 5,742 |
| | 5,080 |
|
Income taxes receivable | 5,772 |
| | 2,723 |
|
Deferred income taxes | 40,062 |
| | 37,317 |
|
Total current assets | 470,025 |
| | 416,808 |
|
Property and equipment, net of accumulated depreciation of $118,544 and $99,910 | 69,475 |
| | 64,150 |
|
Long-term marketable securities | 75,347 |
| | 36,528 |
|
Intangible assets, net | 34,529 |
| | 29,537 |
|
Goodwill | 53,196 |
| | 18,372 |
|
Other assets | 975 |
| | 909 |
|
Total assets | $ | 703,547 |
| | $ | 566,304 |
|
| | | |
LIABILITIES AND EQUITY | | | |
Current liabilities: | | | |
Accounts payable | $ | 15,904 |
| | $ | 10,073 |
|
Accounts payable to related-party | 5,359 |
| | 2,656 |
|
Accrued expenses | 61,499 |
| | 51,125 |
|
Income taxes payable | 569 |
| | 2,358 |
|
Business acquisition liabilities, current | 6,081 |
| | 1,730 |
|
Total current liabilities | 89,412 |
| | 67,942 |
|
Business acquisition liabilities, net of current portion | 20,195 |
| | 15,528 |
|
Deferred income taxes | 5,166 |
| | 6,385 |
|
Other liabilities | 3,320 |
| | 4,089 |
|
Total liabilities | 118,093 |
| | 93,944 |
|
Commitments and contingencies (Note 14) |
|
| |
|
|
Equity: | | | |
Class A common stock; $0.001 par value. Authorized 500,000 shares; issued and outstanding 70,828 and 66,065 shares at December 31, 2014 and 2013, respectively | 71 |
| | 66 |
|
Class B common stock; $0.001 par value. Authorized 275,000 shares; issued and outstanding 23,878 and 27,378 shares at December 31, 2014 and 2013, respectively | 24 |
| | 27 |
|
Additional paid-in capital | 175,242 |
| | 153,987 |
|
Accumulated other comprehensive loss | (1,657 | ) | | (1,009 | ) |
Retained earnings | 411,774 |
| | 319,289 |
|
Total equity | 585,454 |
| | 472,360 |
|
Total liabilities and equity | $ | 703,547 |
| | $ | 566,304 |
|
See accompanying notes to consolidated financial statements.
GLOBUS MEDICAL, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF INCOME
|
| | | | | | | | | | | | |
| | Year Ended |
(In thousands, except per share amounts) | | December 31, 2014 | | December 31, 2013 | | December 31, 2012 |
Sales | | $ | 474,371 |
| | $ | 434,459 |
| | $ | 385,994 |
|
Cost of goods sold | | 110,857 |
| | 100,343 |
| | 75,199 |
|
Gross profit | | 363,514 |
| | 334,116 |
| | 310,795 |
|
| | | | | | |
Operating expenses: | | | | | | |
Research and development | | 31,687 |
| | 26,870 |
| | 27,926 |
|
Selling, general and administrative | | 187,798 |
| | 182,518 |
| | 168,862 |
|
Provision for litigation loss/(income) | | 5,667 |
| | 23,055 |
| | (786 | ) |
Total operating expenses | | 225,152 |
| | 232,443 |
| | 196,002 |
|
| | | | | | |
Operating income | | 138,362 |
| | 101,673 |
| | 114,793 |
|
| | |